August 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 595586] New: rfkill fails to reenable WLAN on eeepc900A
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

http://bugzilla.novell.com/show_bug.cgi?id=595586 http://bugzilla.novell.com/show_bug.cgi?id=595586#c0 Summary: rfkill fails to reenable WLAN on eeepc900A Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: i686 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Mobile Devices AssignedTo: mobile-bugs(a)forge.provo.novell.com ReportedBy: novellbmw(a)lsmod.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.0) Gecko/20100115 SUSE/3.6.0-2.1 Firefox/3.6 After disabling WLAN on Asus eeepc 900A using rfkill button (Fn+F2) it does not get back into a working state without a reboot. Reproducible: Always Steps to Reproduce: 1. boot up eeepc900A with WLAN enabled 2. press Fn+F2 (rfkill button) to disable WLAN 3. press Fn+F2 again to enable WLAN Actual Results: ----- 1. lspci before rfkill 01:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) ----- 2. lspci after rfkill 01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev ff) 3. lspci is the same as with 1. happens even when doing ifdown wlan0, rmmod ath5k ath mac80211 cfg80211 and modprobe ath5k afterwards. dmesg: [ 194.874849] ath5k phy0: unsupported jumbo [ 248.253217] wlan0: deauthenticating by local choice (reason=3) [ 306.919033] ath5k phy0: failed to wakeup the MAC Chip [ 306.919060] ath5k phy0: can't reset hardware (-5) [ 307.135998] ath5k phy0: failed to wakeup the MAC Chip [ 307.136073] ath5k phy0: can't reset hardware (-5) [ 338.296975] ath5k 0000:02:00.0: PCI INT A disabled [ 427.297426] cfg80211: Calling CRDA to update world regulatory domain [ 427.412907] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 427.412964] ath5k 0000:02:00.0: setting latency timer to 64 [ 427.413078] ath5k 0000:02:00.0: registered as 'phy0' [ 427.423569] ath5k phy0: failed to wakeup the MAC Chip [ 427.423672] ath5k 0000:02:00.0: PCI INT A disabled [ 427.423724] ath5k: probe of 0000:02:00.0 failed with error -5 Expected Results: during rfkill, the AR5001 should possibly disappear, not the revision be "ff" after re-enabling WLAN, it should be back working (as was the case with preinstalled Xandros) Bug also occurs on 11.3-MS4, only that there Ethernet also disappears and reappears when using Fn+F2 key. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 34

[Bug 677827] New: setxattr(2) ignores XATTR_CREATE and XATTR_REPLACE
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=677827 https://bugzilla.novell.com/show_bug.cgi?id=677827#c0 Summary: setxattr(2) ignores XATTR_CREATE and XATTR_REPLACE Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: torsten.foertsch(a)gmx.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/534.23 SUSE/11.0.685.0 (KHTML, like Gecko) Chrome/11.0.685.0 Safari/534.23 all of the *setxattr syscalls ignore the flags parameter at least on ext4. If the attribute already exists and flags==XATTR_CREATE the syscall should fail according to the man page. But strace reports this: setxattr(".", "user.diino.size", "franz", 5, XATTR_CREATE) = 0 The same for XATTR_REPLACE, it should fail unless the attribute already exists. But: setxattr(".", "user.diino.sizevsfdbsg", "franz", 5, XATTR_REPLACE) = 0 According to the docs 0 means success. And the result also shows it: $ getfattr -d . # file: . user.diino.size="franz" user.diino.sizevafdv="frinz" user.diino.sizevsfdbsg="franz" user.hugo="fritz" Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 699123] New: Reading from a samba share mounted with cifs is too slow
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=699123 https://bugzilla.novell.com/show_bug.cgi?id=699123#c0 Summary: Reading from a samba share mounted with cifs is too slow Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: praise.tazio(a)tiscalinet.it QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 Reading from a Samba Share on a Gigabit ethernet enver goes above 10Mbyte/s, when FTP can reach 95Mbyte/s and a Windows Client. I does not help changing mount options. Reproducible: Always Steps to Reproduce: 1.Mount a remote samba (or Windows) share with mount.cifs 2.Read a large file 3. Actual Results: It never reaches 10Mbyte/s Expected Results: It is slow. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 687368] New: Loop device gets stuck when using vm-install to create Xen domU
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=687368 https://bugzilla.novell.com/show_bug.cgi?id=687368#c0 Summary: Loop device gets stuck when using vm-install to create Xen domU Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jfunk(a)funktronics.ca QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=424801) --> (http://bugzilla.novell.com/attachment.cgi?id=424801) /var/log/messages User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/534.29 SUSE/12.0.731.0 (KHTML, like Gecko) Chrome/12.0.731.0 Safari/534.29 The loop device of a domU seems to get stuck when using vm-install to install a domU, specifically CentOS 5. I tried this on two different machines, and I am getting the same result. Reproducible: Always Steps to Reproduce: 1. Open vm-install 2. Create a new virtual machine, select RHEL5 as the type, paravirt mode, default disk image file, and this installation URL: http://centos.mirror.facebook.net/5/os/x86_64/ 3.Complete the installation Actual Results: Once the OS is installed, the domU reboots, and never comes back. The loop device appears to be stuck at this point. If I do a "losetup -a" the command goes into D state and never returns. Expected Results: The domU should have rebooted. After the losetup hang, I sent a few commands to /proc/sysrq-trigger. The results are near the bottom. The loop0, umount, and losetup call traces are particularly interesting. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 21

[Bug 681840] New: Extend backlist of SCSI devices (was: Adaptec aic7xxx driver does endless resets with kernel 2.6.37)
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=681840 https://bugzilla.novell.com/show_bug.cgi?id=681840#c0 Summary: Extend backlist of SCSI devices (was: Adaptec aic7xxx driver does endless resets with kernel 2.6.37) Classification: openSUSE Product: openSUSE 11.4 Version: RC 2 Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: werner(a)novell.com QAContact: qa(a)suse.de CC: hare(a)novell.com, jeffm(a)novell.com, zeuthen(a)gmail.com, jbottomley(a)novell.com Depends on: 679277 Blocks: 681196 Found By: Development Blocker: --- Just to make the patch for bug #679277 provided in attachment #420152 not to be lost, I've open this bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 704788] New: kernel BUG at nfs4state.c:391 after you update
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=704788 https://bugzilla.novell.com/show_bug.cgi?id=704788#c0 Summary: kernel BUG at nfs4state.c:391 after you update Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: Other OS/Version: openSUSE 11.4 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: sweet_f_a(a)gmx.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0 Hi, today some seconds after maintainance updates were dropped in on nfs server and some clients I've got the trace below on server. The following simultaneous events on server(glaukos) and client(skylla) seems to be the cause of this: skylla:~ # rpm -qa --last |head |grep nfs nfs-kernel-server-1.2.3-11.16.1 Sat 09 Jul 2011 05:00:14 AM CEST nfs-client-1.2.3-11.16.1 Sat 09 Jul 2011 05:00:12 AM CEST glaukos(server):~ # rpm -qa --last |head |grep nfs nfs-kernel-server-1.2.3-11.16.1 Sat 09 Jul 2011 05:00:13 AM CEST nfs-client-1.2.3-11.16.1 Sat 09 Jul 2011 05:00:09 AM CEST My important question now: Is this just an unlucky thing because of that stressful mix of update/restarting clients and servers while umounting/mounting exports plus a lot NFS I/O? Or are these nfs updates buggy? Here the server log which starts with some stress by client, then you update on server and finally the trace and hanging clients: Jul 9 05:00:01 glaukos run-crons[10218]: logrotate: OK Jul 9 05:00:03 glaukos rpc.mountd[1881]: authenticated mount request from skylla.ga.local:970 for /exports/var/lib/software/opensuse/distribution/11.4/repo/non-oss (/exports/var/lib/software) Jul 9 05:00:03 glaukos rpc.mountd[1881]: authenticated unmount request from skylla.ga.local:861 for /exports/var/lib/software/opensuse/distribution/11.4/repo/non-oss (/exports/var/lib/software) Jul 9 05:00:03 glaukos rpc.mountd[1881]: authenticated mount request from skylla.ga.local:759 for /exports/var/lib/software/opensuse/distribution/11.4/repo/oss (/exports/var/lib/software) Jul 9 05:00:03 glaukos rpc.mountd[1881]: authenticated unmount request from skylla.ga.local:867 for /exports/var/lib/software/opensuse/distribution/11.4/repo/oss (/exports/var/lib/software) Jul 9 05:00:03 glaukos rpc.mountd[1881]: authenticated mount request from skylla.ga.local:966 for /exports/var/lib/software/opensuse/update/11.4 (/exports/var/lib/software) Jul 9 05:00:03 glaukos rpc.mountd[1881]: authenticated unmount request from skylla.ga.local:873 for /exports/var/lib/software/opensuse/update/11.4 (/exports/var/lib/software) Jul 9 05:00:03 glaukos rpc.mountd[1881]: authenticated mount request from skylla.ga.local:682 for /exports/var/lib/software/opensuse/update/11.4 (/exports/var/lib/software) Jul 9 05:00:03 glaukos rpc.mountd[1881]: authenticated unmount request from skylla.ga.local:879 for /exports/var/lib/software/opensuse/update/11.4 (/exports/var/lib/software) Jul 9 05:00:03 glaukos rpc.mountd[1881]: authenticated mount request from skylla.ga.local:1021 for /exports/var/lib/software/opensuse/update/11.4 (/exports/var/lib/software) Jul 9 05:00:04 glaukos rpc.mountd[1881]: authenticated unmount request from skylla.ga.local:922 for /exports/var/lib/software/opensuse/update/11.4 (/exports/var/lib/software) Jul 9 05:00:09 glaukos useradd[10369]: account already exists - account=statd, by=0 Jul 9 05:00:11 glaukos rpc.mountd[1881]: authenticated mount request from skylla.ga.local:725 for /exports/var/lib/software/opensuse/update/11.4 (/exports/var/lib/software) Jul 9 05:00:11 glaukos rpc.statd[1884]: Caught signal 15, un-registering and exiting Jul 9 05:00:11 glaukos rpc.statd[10408]: Version 1.2.3 starting Jul 9 05:00:11 glaukos rpc.statd[10408]: Flags: TI-RPC Jul 9 05:00:13 glaukos kernel: [3225039.515240] nfsd: last server has exited, flushing export cache Jul 9 05:00:13 glaukos rpc.statd[10408]: Caught signal 15, un-registering and exiting Jul 9 05:00:13 glaukos rpc.mountd[1881]: Caught signal 15, un-registering and exiting. Jul 9 05:00:13 glaukos rpc.mountd[10485]: Version 1.2.3 starting Jul 9 05:00:13 glaukos rpc.statd[10497]: Version 1.2.3 starting Jul 9 05:00:13 glaukos rpc.statd[10497]: Flags: TI-RPC Jul 9 05:00:14 glaukos kernel: [3225040.193389] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Jul 9 05:00:14 glaukos kernel: [3225040.193490] NFSD: starting 90-second grace period Jul 9 05:00:14 glaukos sm-notify[10528]: Version 1.2.3 starting Jul 9 05:00:14 glaukos sm-notify[10528]: Backgrounding to notify hosts... Jul 9 05:00:18 glaukos run-crons[10218]: opensuse.org-online_update: OK Jul 9 05:00:18 glaukos run-crons[10218]: suse-clean_catman: OK Jul 9 05:00:18 glaukos run-crons[10218]: suse-do_mandb: OK Jul 9 05:00:19 glaukos su: (to nobody) root on none Jul 9 05:00:24 su: last message repeated 2 times Jul 9 05:00:24 glaukos run-crons[10218]: suse-updatedb: OK Jul 9 05:00:25 glaukos run-crons[10218]: suse.de-backup-rc.config: OK Jul 9 05:00:26 glaukos run-crons[10218]: suse.de-backup-rpmdb: OK Jul 9 05:00:26 glaukos run-crons[10218]: suse.de-check-battery: OK Jul 9 05:00:26 glaukos run-crons[10218]: suse.de-clean-tmp: OK Jul 9 05:00:26 glaukos run-crons[10218]: suse.de-cron-local: OK Jul 9 05:00:39 glaukos kernel: [3225065.434416] ------------[ cut here ]------------ Jul 9 05:00:39 glaukos kernel: [3225065.434429] kernel BUG at /usr/src/packages/BUILD/kernel-desktop-2.6.37.6/linux-2.6.37/fs/nfsd/nfs4state.c:391! Jul 9 05:00:39 glaukos kernel: [3225065.434439] invalid opcode: 0000 [#1] PREEMPT SMP Jul 9 05:00:39 glaukos kernel: [3225065.434448] last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map Jul 9 05:00:39 glaukos kernel: [3225065.434456] CPU 0 Jul 9 05:00:39 glaukos kernel: [3225065.434459] Modules linked in: microcode raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx md5 nfsd lockd nfs_acl auth_rpcgss sunrpc w83793 hwmon_vid cor etemp edd cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf xfs exportfs radeon ttm drm_kms_helper drm i3200_edac e1000e ses enclosure iTCO_wdt edac_core i2c_algo_bit i2c_i801 iTCO_vendor_suppor t shpchp sg pci_hotplug sr_mod cdrom pcspkr ghes serio_raw hed video container button ext4 jbd2 crc16 linear dm_snapshot dm_mod fan processor thermal thermal_sys aacraid Jul 9 05:00:39 glaukos kernel: [3225065.434545] Jul 9 05:00:39 glaukos kernel: [3225065.434551] Pid: 10526, comm: nfsd Not tainted 2.6.37.6-0.5-desktop #1 Supermicro X7SB4/E/X7SB4/E Jul 9 05:00:39 glaukos kernel: [3225065.434564] RIP: 0010:[<ffffffffa04ee3b2>] [<ffffffffa04ee3b2>] nfs4_access_to_omode+0x12/0x40 [nfsd] Jul 9 05:00:39 glaukos kernel: [3225065.434588] RSP: 0018:ffff88003c755b98 EFLAGS: 00010297 Jul 9 05:00:39 glaukos kernel: [3225065.434595] RAX: 0000000000000004 RBX: ffff8800490aebf0 RCX: ffff88003c755b90 Jul 9 05:00:39 glaukos kernel: [3225065.434602] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 Jul 9 05:00:39 glaukos kernel: [3225065.434610] RBP: ffff8800071b20d8 R08: dead000000100100 R09: dead000000200200 Jul 9 05:00:39 glaukos kernel: [3225065.434617] R10: dead000000100100 R11: dead000000200200 R12: ffff8800071b2110 Jul 9 05:00:39 glaukos kernel: [3225065.434625] R13: ffff8800071b20d8 R14: ffff88001eb0aa58 R15: 0000000000000000 Jul 9 05:00:39 glaukos kernel: [3225065.434633] FS: 0000000000000000(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000 Jul 9 05:00:39 glaukos kernel: [3225065.434642] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Jul 9 05:00:39 glaukos kernel: [3225065.434649] CR2: 00007f0173626000 CR3: 0000000225588000 CR4: 00000000000006f0 Jul 9 05:00:39 glaukos kernel: [3225065.434657] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Jul 9 05:00:39 glaukos kernel: [3225065.434664] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Jul 9 05:00:39 glaukos kernel: [3225065.434672] Process nfsd (pid: 10526, threadinfo ffff88003c754000, task ffff8802241b2400) Jul 9 05:00:39 glaukos kernel: [3225065.434679] Stack: Jul 9 05:00:39 glaukos kernel: [3225065.434684] ffffffffa04ef2e0 ffff88001eb0aa58 00000000071b20d8 ffff8800a3ea2dd0 Jul 9 05:00:39 glaukos kernel: [3225065.434696] ffff8800490aebf0 ffff8800071b20d8 ffffffffa04ef421 ffff8800071b20d8 Jul 9 05:00:39 glaukos kernel: [3225065.434707] 000000001d270000 ffff8802249fd040 ffffffffa04ef4f9 ffff8802257ce1a0 Jul 9 05:00:39 glaukos kernel: [3225065.434718] Call Trace: Jul 9 05:00:39 glaukos kernel: [3225065.434786] [<ffffffffa04ef2e0>] free_generic_stateid+0x20/0xb0 [nfsd] Jul 9 05:00:39 glaukos kernel: [3225065.434850] [<ffffffffa04ef421>] unhash_lockowner+0xb1/0x180 [nfsd] Jul 9 05:00:39 glaukos kernel: [3225065.434914] [<ffffffffa04ef4f9>] release_lockowner+0x9/0x20 [nfsd] Jul 9 05:00:39 glaukos kernel: [3225065.434977] [<ffffffffa04f4618>] nfsd4_lock+0x258/0x5e0 [nfsd] Jul 9 05:00:39 glaukos kernel: [3225065.435045] [<ffffffffa04e3ca1>] nfsd4_proc_compound+0x3f1/0x4d0 [nfsd] Jul 9 05:00:39 glaukos kernel: [3225065.435095] [<ffffffffa04d198d>] nfsd_dispatch+0xfd/0x240 [nfsd] Jul 9 05:00:39 glaukos kernel: [3225065.435122] [<ffffffffa0487184>] svc_process_common+0x344/0x680 [sunrpc] Jul 9 05:00:39 glaukos kernel: [3225065.435169] [<ffffffffa04875ce>] svc_process+0x10e/0x150 [sunrpc] Jul 9 05:00:39 glaukos kernel: [3225065.435210] [<ffffffffa04d10e2>] nfsd+0xb2/0x150 [nfsd] Jul 9 05:00:39 glaukos kernel: [3225065.435224] [<ffffffff81079ad6>] kthread+0x96/0xa0 Jul 9 05:00:39 glaukos kernel: [3225065.435238] [<ffffffff81003d74>] kernel_thread_helper+0x4/0x10 Jul 9 05:00:39 glaukos kernel: [3225065.435247] Code: 03 e1 eb 97 83 eb 01 75 d9 31 c0 eb a2 66 66 66 2e 0f 1f 84 00 00 00 00 00 83 e7 03 83 ff 02 74 28 83 ff 03 74 13 83 ff 01 74 06 <0f> 0b 0f 1f 40 00 31 c0 c3 0f 1f 44 00 00 b8 02 00 00 00 c3 66 Jul 9 05:00:39 glaukos kernel: [3225065.435302] RIP [<ffffffffa04ee3b2>] nfs4_access_to_omode+0x12/0x40 [nfsd] Jul 9 05:00:39 glaukos kernel: [3225065.435320] RSP <ffff88003c755b98> Jul 9 05:00:39 glaukos kernel: [3225065.534070] ---[ end trace a6e93c30dd913031 ]--- Jul 9 05:16:14 glaukos sm-notify[10529]: Unable to notify chantico.ga.local, giving up Jul 9 05:16:14 glaukos sm-notify[10529]: Unable to notify otto.ga.local, giving up Jul 9 05:16:14 glaukos sm-notify[10529]: Unable to notify quant.ga.local, giving up Jul 9 05:16:14 glaukos sm-notify[10529]: Unable to notify clyde.ga.local, giving up Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 670860] New: invalid opcode: 0000 kernel BUG at kernel-default-2.6.34.7/linux-2.6.34/fs/ext4/inode.c:2019!
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=670860 https://bugzilla.novell.com/show_bug.cgi?id=670860#c0 Summary: invalid opcode: 0000 kernel BUG at kernel-default-2.6.34.7/linux-2.6.34/fs/ext4/inode.c:2 019! Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: p.rachunek(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=413192) --> (http://bugzilla.novell.com/attachment.cgi?id=413192) dmesg User-Agent: Mozilla/5.0 (X11; Linux i686; rv:2.0b12pre) Gecko/20110209 Firefox/4.0b12pre [ 5119.475663] ------------[ cut here ]------------ [ 5119.476504] kernel BUG at /usr/src/packages/BUILD/kernel-default-2.6.34.7/linux-2.6.34/fs/ext4/inode.c:2019! [ 5119.476504] invalid opcode: 0000 [#1] SMP [ 5119.476504] last sysfs file: /sys/devices/system/cpu/cpu1/cache/index1/shared_cpu_map [ 5119.476504] CPU 1 [ 5119.476504] Modules linked in: usb_storage edd cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf loop ppdev r8169 parport_pc sr_mod floppy parport cdrom sg pcspkr i2c_i801 iTCO_wdt iTCO_vendor_support serio_raw ext4 jbd2 crc16 linear raid456 async_raid6_recov async_pq usbhid raid6_pq async_xor xor async_memcpy async_tx raid10 raid1 raid0 i915 drm_kms_helper uhci_hcd ehci_hcd drm i2c_algo_bit sd_mod video button usbcore intel_agp dm_snapshot dm_mod fan processor ata_generic ahci pata_jmicron libata scsi_mod thermal thermal_sys [ 5119.476504] [ 5119.476504] Pid: 3057, comm: flush-8:64 Not tainted 2.6.34.7-0.7-default #1 965G-DS3/965G-DS3 [ 5119.476504] RIP: 0010:[<ffffffffa02b09ef>] [<ffffffffa02b09ef>] mpage_da_submit_io+0x15f/0x170 [ext4] [ 5119.476504] RSP: 0018:ffff88010f6cdad0 EFLAGS: 00010246 [ 5119.476504] RAX: 002000000000082c RBX: 000000000005037d RCX: ffff88010f6cdd90 [ 5119.476504] RDX: ffff88010f6cdb18 RSI: 0000000000005b7c RDI: ffffea00016fdc50 [ 5119.476504] RBP: 0000000000000000 R08: 0000000000000000 R09: e0c0000000000000 [ 5119.476504] R10: a80005bf70600000 R11: ffff88011e4842a8 R12: ffff88010f6cdc20 [ 5119.476504] R13: 0000000000055893 R14: ffff880125990210 R15: 0000000000000003 [ 5119.476504] FS: 0000000000000000(0000) GS:ffff880001e80000(0000) knlGS:0000000000000000 [ 5119.476504] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5119.476504] CR2: 00007ffaa5546370 CR3: 000000012e981000 CR4: 00000000000006e0 [ 5119.476504] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5119.476504] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5119.476504] Process flush-8:64 (pid: 3057, threadinfo ffff88010f6cc000, task ffff8801103b0340) [ 5119.476504] Stack: [ 5119.476504] ffff88010f6cdb18 ffff88010f6cdb18 0000000000005b7c 0000000e000007ff [ 5119.476504] <0> 000000000000000e 0000000000000000 ffffea00016fdba8 ffffea00016fdbe0 [ 5119.476504] <0> ffffea00016fdc18 ffffea00016fdc50 ffffea00016fdc88 ffffea00016fdcc0 [ 5119.476504] Call Trace: [ 5119.476504] [<ffffffffa02b63fa>] ext4_da_writepages+0x3fa/0x5f0 [ext4] [ 5119.476504] [<ffffffff8114f472>] writeback_single_inode+0xd2/0x330 [ 5119.476504] [<ffffffff8114f919>] writeback_sb_inodes+0x109/0x190 [ 5119.476504] [<ffffffff8114ffd0>] writeback_inodes_wb+0x100/0x1e0 [ 5119.476504] [<ffffffff811501c5>] wb_writeback+0x115/0x1e0 [ 5119.476504] [<ffffffff81150762>] wb_do_writeback+0x72/0x160 [ 5119.476504] [<ffffffff81150893>] bdi_writeback_task+0x43/0xe0 [ 5119.476504] [<ffffffff810f9373>] bdi_start_fn+0x63/0xd0 [ 5119.476504] [<ffffffff81071dce>] kthread+0x8e/0xa0 [ 5119.476504] [<ffffffff81003cf4>] kernel_thread_helper+0x4/0x10 [ 5119.476504] Code: 85 f6 74 0a 48 8d 7c 24 20 e8 ce b0 e3 e0 4c 39 eb 0f 86 05 ff ff ff 48 81 c4 a8 00 00 00 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 0f 0b 31 ed eb e4 0f 0b 0f 1f 80 00 00 00 00 48 83 ec 08 [ 5119.476504] RIP [<ffffffffa02b09ef>] mpage_da_submit_io+0x15f/0x170 [ext4] [ 5119.476504] RSP <ffff88010f6cdad0> [ 5119.662378] ---[ end trace 9f4479f225578256 ]--- Reproducible: Didn't try Steps to Reproduce: 1. usb 2.0 flash stick /dev/sde 2. mkfs -t ext4 /dev/sde 3. mount /dev/sde /mnt/usb0 4. cp fileOnExt3-1.8GB.dat /mnt/usb0 && umount /mnt/usb0 Actual Results: crash in umount command leaving umount process unkillable and OS is unable to shutdown properly. Every sync or mount produces the same crash dump. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 689414] New: Repeatable NFS mount hang
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=689414 https://bugzilla.novell.com/show_bug.cgi?id=689414#c0 Summary: Repeatable NFS mount hang Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jmkatcher(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.16) Gecko/20110319 SUSE/3.6.16-0.2.1 Firefox/3.6.16 Same as Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=669204#c12 Extensive use of NFS causes a mount to get stuck. Processors gradually lock up while the console starts spitting the likes of: [611775.142230] Code: 0f eb f5 c3 66 90 fa b8 00 00 01 00 f0 0f c1 07 0f b7 d0 c1 e8 10 39 c2 74 07 f3 90 0f b7 17 eb f5 c3 0f 1f 40 00 66 ff 07 56 9d <c3> 66 2e 0f 1f 84 00 00 00 00 00 ba ff ff ff ff f0 0f c1 17 83 [611775.142244] Call Trace: [611775.142246] [<ffffffff8145ba18>] __wait_on_bit_lock+0x38/0xb0 [611775.142248] [<ffffffff8145bb07>] out_of_line_wait_on_bit_lock+0x77/0x90 [611775.142254] [<ffffffffa03108b9>] nfs_commit_inode+0xb9/0x2a0 [nfs] [611775.142268] [<ffffffffa0310cb6>] nfs_wb_page+0x76/0xb0 [nfs] [611775.142280] [<ffffffff810ebdc0>] invalidate_inode_pages2_range+0x1e0/0x2d0 [611775.142284] [<ffffffffa03030e8>] nfs_revalidate_mapping+0x118/0x170 [nfs] [611775.142292] [<ffffffffa03001c3>] nfs_file_read+0x73/0x130 [nfs] [611775.142297] [<ffffffff8112eaff>] do_sync_read+0xbf/0x100 [611775.142299] [<ffffffff8112f2e3>] vfs_read+0xb3/0x190 [611775.142301] [<ffffffff8112f40e>] sys_read+0x4e/0x90 [611775.142303] [<ffffffff81002efb>] system_call_fastpath+0x16/0x1b [611775.142305] [<00007f2aafc393e0>] 0x7f2aafc393e0 [611840.640059] BUG: soft lockup - CPU#1 stuck for 61s! [zsh:945] I noticed that the Fedora bugzilla reports a patch that isn't present in OS 11.2, 11.3 or 11.4, so I'm just switching a test system over to an 11.3 kernel with this included. Reproducible: Sometimes Steps to Reproduce: Large amounts of NFS traffic but not always reproducible. Have seen this with both Broadcom and Intel Gbit Enet cards. Actual Results: See Details Expected Results: I/O should continue to run, processor should not lock -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 679898] New: kernel OOPS while writing to ext4 loop
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=679898 https://bugzilla.novell.com/show_bug.cgi?id=679898#c0 Summary: kernel OOPS while writing to ext4 loop Classification: openSUSE Product: openSUSE 11.5 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: jack(a)novell.com ReportedBy: coolo(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- While I experimented with clicfs and ext3 loop mounts into it, I got a OOPS - very likely as the container reached its size limit: Note this is factory - 2.6.38-rc8 [ 2852.318574] EXT4-fs (loop0): delayed block allocation failed for inode 12 at logical offset 186368 with max blocks 2048 with error -5 [ 2852.318579] EXT4-fs (loop0): This should not happen!! Data will be lost [ 2852.318580] [ 2852.320164] EXT4-fs (loop0): delayed block allocation failed for inode 12 at logical offset 186368 with max blocks 2048 with error -5 [ 2852.320168] EXT4-fs (loop0): This should not happen!! Data will be lost [ 2852.320169] [ 2852.320209] ------------[ cut here ]------------ [ 2852.320246] kernel BUG at /usr/src/packages/BUILD/kernel-desktop-2.6.38/linux-2.6.37/fs/ext4/inode.c:2189! [ 2852.320301] invalid opcode: 0000 [#1] PREEMPT SMP [ 2852.320340] last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0A:00/power_supply/BAT0/energy_full [ 2852.320409] CPU 0 [ 2852.320424] Modules linked in: loop fuse tun rfcomm sco bnep l2cap binfmt_misc af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave microcode acpi_cpufreq mperf arc4 ecb iwlagn snd_hda_codec_conexant iwlcore snd_hda_intel mac80211 snd_hda_codec snd_hwdep cfg80211 snd_pcm kvm_intel kvm e1000e iTCO_wdt snd_timer thinkpad_acpi dm_mod btusb snd_page_alloc pcspkr bluetooth iTCO_vendor_support sg rfkill i2c_i801 snd soundcore battery wmi ac autofs4 ext4 jbd2 crc16 i915 drm_kms_helper drm i2c_algo_bit button video fan processor thermal thermal_sys [ 2852.320871] [ 2852.320883] Pid: 4414, comm: flush-7:0 Not tainted 2.6.38-rc7-2-desktop #1 LENOVO 7470BN2/7470BN2 [ 2852.320947] RIP: 0010:[<ffffffffa014a572>] [<ffffffffa014a572>] ext4_da_block_invalidatepages+0x122/0x130 [ext4] [ 2852.321007] RSP: 0018:ffff88002f487890 EFLAGS: 00010246 [ 2852.321007] RAX: 0020000000000024 RBX: 000000000002dfff RCX: 0000000000000000 [ 2852.321007] RDX: 000000000000000e RSI: 0000000000000001 RDI: ffff88002f756740 [ 2852.321007] RBP: ffff88002f4878a0 R08: 0000000000000001 R09: ffffea00012e61f8 [ 2852.321007] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88007355e618 [ 2852.321007] R13: ffffea00017e8060 R14: ffff88002f487980 R15: ffff88002f487a88 [ 2852.321007] FS: 0000000000000000(0000) GS:ffff880079200000(0000) knlGS:0000000000000000 [ 2852.321007] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2852.321007] CR2: 00007f77ca9d24b0 CR3: 0000000001a03000 CR4: 00000000000406f0 [ 2852.321007] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2852.321007] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 2852.321007] Process flush-7:0 (pid: 4414, threadinfo ffff88002f486000, task ffff88002f756740) [ 2852.321007] Stack: [ 2852.321007] 0000000000000020 0000000e2f4878f0 000000000000000e ffffea0000be1a68 [ 2852.321007] ffffea00017e8060 ffffea00017e80d0 ffffea000176d400 ffffea000176d470 [ 2852.321007] ffffea000079bb20 ffffea000079bb90 ffffea00003d1a60 ffffea00003d1ad0 [ 2852.321007] Call Trace: [ 2852.321007] [<ffffffffa0151050>] mpage_da_map_and_submit+0x270/0x460 [ext4] [ 2852.321007] [<ffffffffa0151412>] __mpage_da_writepage+0xe2/0x180 [ext4] [ 2852.321007] [<ffffffffa015162f>] write_cache_pages_da+0x17f/0x290 [ext4] [ 2852.321007] [<ffffffffa0151acd>] ext4_da_writepages+0x38d/0x700 [ext4] [ 2852.321007] [<ffffffff8117cf65>] writeback_single_inode+0x95/0x230 [ 2852.321007] [<ffffffff8117d325>] generic_writeback_sb_inodes+0xd5/0x170 [ 2852.321007] [<ffffffff8117d4b3>] __writeback_inodes_sb+0xf3/0x100 [ 2852.321007] [<ffffffff8117e16d>] wb_writeback+0x15d/0x3f0 [ 2852.321007] [<ffffffff8117eb22>] wb_do_writeback+0xc2/0x280 [ 2852.321007] [<ffffffff8117ed94>] bdi_writeback_thread+0xb4/0x320 [ 2852.321007] [<ffffffff8107bbc6>] kthread+0x96/0xa0 [ 2852.321007] [<ffffffff81003d04>] kernel_thread_helper+0x4/0x10 [ 2852.321007] Code: 49 83 c5 01 85 f6 74 08 48 89 ef e8 09 be fb e0 4c 39 eb 0f 83 38 ff ff ff 48 81 c4 98 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 41 56 41 55 41 54 4d [ 2852.321007] RIP [<ffffffffa014a572>] ext4_da_block_invalidatepages+0x122/0x130 [ext4] [ 2852.321007] RSP <ffff88002f487890> [ 2852.338189] ---[ end trace ef6f03d937c1abd8 ]--- -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 642142] New: BUG_ON when unloading pm8001 driver
by bugzilla_noreply＠novell.com 02 Aug '11

02 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=642142 https://bugzilla.novell.com/show_bug.cgi?id=642142#c0 Summary: BUG_ON when unloading pm8001 driver Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: chuck_tuffli(a)pmc-sierra.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/534.3 (KHTML, like Gecko) Chrome/6.0.472.63 Safari/534.3 Any driver using libsas that connects to a JBOD which issues a PHY_VACANT will segfault when unloading (rmmod). See linux-scsi mailing list (http://marc.info/?l=linux-scsi&m=128496203905234&w=2) for details and a patch. Reproducible: Always Steps to Reproduce: 1. modprobe pm8001 2. connect device to an HP D2700 SAS disk enclosure 3. wait to detect the attached drives 4. rmmod pm8001 Actual Results: rmmod segfaults and driver does not unload. Relevant section from /var/log/messages [15764.564190] ------------[ cut here ]------------ [15764.564193] kernel BUG at /usr/src/packages/BUILD/kernel-desktop-2.6.34/linux-2.6.34/include/linux/transport_class.h:92! [15764.564197] invalid opcode: 0000 [#1] PREEMPT SMP [15764.564201] last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/class [15764.564205] CPU 0 [15764.564206] Modules linked in: ses enclosure pm8001(-) edd fuse loop dm_mod libsas scsi_transport_sas iTCO_wdt ioatdma iTCO_vendor_support sr_mod shpchp i5400_edac edac_core pcspkr cdrom i5k_amb thermal processor floppy i2c_i801 dca sg pci_hotplug e1000e thermal_sys container button sd_mod ata_generic ata_piix libata scsi_mod reiserfs [last unloaded: spc] [15764.564240] [15764.564244] Pid: 2985, comm: rmmod Not tainted 2.6.34-12-desktop #1 X7DWE/X7DWE [15764.564247] RIP: 0010:[<ffffffffa023f136>] [<ffffffffa023f136>] sas_release_transport+0x66/0x70 [scsi_transport_sas] [15764.564263] RSP: 0018:ffff88007e94fed8 EFLAGS: 00010286 [15764.564266] RAX: 00000000fffffff0 RBX: ffff88007de01000 RCX: ffff88007e4f1d40 [15764.564269] RDX: 000000000000101d RSI: ffffffff81240f20 RDI: ffffffff81a46600 [15764.564272] RBP: ffffffffa02eaee0 R08: 0000000000000000 R09: ffff88007e5246a0 [15764.564275] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000880 [15764.564277] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 [15764.564280] FS: 00007fb3ea523700(0000) GS:ffff880001e00000(0000) knlGS:0000000000000000 [15764.564283] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [15764.564286] CR2: 00007f0f412c8710 CR3: 000000007f07a000 CR4: 00000000000006f0 [15764.564289] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [15764.564291] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [15764.564294] Process rmmod (pid: 2985, threadinfo ffff88007e94e000, task ffff88007bc1c5c0) [15764.564297] Stack: [15764.564299] 0000000000000880 ffffffff8108bd0f ff00313030386d70 ffffffff810fd43b [15764.564304] <0> ffff88007dd7e4c0 ffff88007be86c08 ffff88007e50d6c0 ffff88007dd7e4a8 [15764.564309] <0> 0000000000000000 ffff88007be86c60 ffffffffa02eaee0 00007fb300000880 [15764.564315] Call Trace: [15764.564343] [<ffffffff8108bd0f>] sys_delete_module+0x18f/0x2a0 [15764.564355] [<ffffffff81002ffb>] system_call_fastpath+0x16/0x1b [15764.564366] [<00007fb3ea086d77>] 0x7fb3ea086d77 [15764.564368] Code: 75 29 48 8d bb 88 08 00 00 e8 47 72 0c e1 85 c0 75 19 48 8d bb f0 08 00 00 e8 37 72 0c e1 85 c0 75 09 48 89 df 5b e9 7a b1 ed e0 <0f> 0b 0f 1f 84 00 00 00 00 00 41 57 49 89 ff 41 56 41 55 49 89 [15764.564414] RIP [<ffffffffa023f136>] sas_release_transport+0x66/0x70 [scsi_transport_sas] [15764.564423] RSP <ffff88007e94fed8> [15764.564428] ---[ end trace c9747f87f84c0091 ]--- Expected Results: No segfault and driver unloads -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7