March 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 677247] New: libpng14-devel-32bit package missing
by bugzilla_noreply＠novell.com 09 Mar '11

09 Mar '11

https://bugzilla.novell.com/show_bug.cgi?id=677247 https://bugzilla.novell.com/show_bug.cgi?id=677247#c0 Summary: libpng14-devel-32bit package missing Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Enhancement Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: bart.vanassche(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.13) Gecko/20101203 SUSE/3.6.13-0.2.1 Firefox/3.6.13 Building 32-bit Wine from sources with graphics support is only possible after having installed a 32-bit libpng development package. Such a package is not available in the openSUSE distribution unfortunately. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 677236] Buffer overflow in fsck.vfat
by bugzilla_noreply＠novell.com 09 Mar '11

09 Mar '11

https://bugzilla.novell.com/show_bug.cgi?id=677236 https://bugzilla.novell.com/show_bug.cgi?id=677236#c7 Petr Gajdos <pgajdos(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |suse-beta(a)cboltz.de --- Comment #7 from Petr Gajdos <pgajdos(a)novell.com> 2011-03-09 11:50:07 UTC --- Ok, thanks. I have submitted dosfstools with proposed patch into Base:System devel project. Christian, could you please test if it really fixes you problem? Petr -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 523350] New: ash-1.6.1-137.5: 2 * missing calls to fclose
by bugzilla_noreply＠novell.com 09 Mar '11

09 Mar '11

http://bugzilla.novell.com/show_bug.cgi?id=523350 Summary: ash-1.6.1-137.5: 2 * missing calls to fclose Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: All OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dcb314(a)hotmail.com QAContact: qa(a)suse.de Found By: --- I just had a look at factory package ash-1.6.1-137.5 For source code sh-1.6.1/mknodes.c, around line 276 is the function output. 1. For local variable hfile, there seems to be a call to fclose missing. This could cause buffered data to be lost. 2. For local variable patfile, there is no call to fclose. This is a resource leak. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 677246] New: kiwi: make usbboot more windows friendly
by bugzilla_noreply＠novell.com 09 Mar '11

09 Mar '11

https://bugzilla.novell.com/show_bug.cgi?id=677246 https://bugzilla.novell.com/show_bug.cgi?id=677246#c0 Summary: kiwi: make usbboot more windows friendly Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: ASSIGNED Severity: Minor Priority: P5 - None Component: System Imaging AssignedTo: ms(a)novell.com ReportedBy: ms(a)novell.com QAContact: adrian(a)novell.com Found By: --- Blocker: --- Anyway here is what I've tried so far. As a test I took the drive and using the Windows format to make a fat partition. Windows of course sees it just fine. Linux does also. I then started Yast (parted) partitioning software and removed all partitions on this 1gb drive. The drive itself is sdf. I made sdf1 be the Fat partition and sdf2 to be the linux partion. I "dd" the iso to the sdf2. I tried booting from it...no go. I stuck it in a Win machine. The fat partition was available. I then reversed the partitions. So sdf1 was the iso and sdf2 was the fat partition. It boots fine but when I put it in a Win machine it wants to format the drive!! I'm going to SNAP! I tried also to change the hex digit in the string on the drive itself...no go. This has to be done in Windows with some software that Matt pointed out. I also tried changing the driver in Windows for this USB drive. This didn't work either however I need to try it again as I think I missed a critical step. So it appears that you can't boot off a USB drive it the boot sector is anything but partition 1 and Windows won't see the USB drive if it's anything but partition 1!! Honestly modifying the USB to be a internal drive is an option but so far as I expected nothing is working. Windows is pretty stupid when It comes to removable media that's for sure. ========== Allow a fat data partition to be created as first partition on the stick and let the system reside on partition n+1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 656182] New: get sent an invalid request error while delete user
by bugzilla_noreply＠novell.com 09 Mar '11

09 Mar '11

https://bugzilla.novell.com/show_bug.cgi?id=656182 https://bugzilla.novell.com/show_bug.cgi?id=656182#c0 Summary: get sent an invalid request error while delete user Classification: Internal Novell Products Product: openSUSE Build Service Version: 2.1 Platform: i686 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: api AssignedTo: adrian(a)novell.com ReportedBy: zhuijun.bao(a)gmail.com QAContact: adrian(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US) AppleWebKit/534.7 (KHTML, like Gecko) Chrome/7.0.517.44 Safari/534.7 Get "You sent an invalid request!" error, while delete user. can not delete any user. ps:I login as Admin Reproducible: Always Steps to Reproduce: 1.loing as an Admin 2.go to user manamge 3.choose a user, and click delete 4.choose yes when ask me to confirm delete 5."You sent an invalid request!" error display Actual Results: error, the select user can not delete Expected Results: no error, the select user will be deleted this problem caused by src/api/app/views/active_rbac/user/delete.rhtml change delete to destroy, just as below: <% form_for :group, :url => { :action => :destroy, :id => @user } do |form| %> <%= submit_tag 'Yes', :name => 'yes' %> <%= submit_tag 'No', :name => 'no' %> <% end %> -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 670959] New: /dev/ttyUSB* not created - firware missing?
by bugzilla_noreply＠novell.com 09 Mar '11

09 Mar '11

https://bugzilla.novell.com/show_bug.cgi?id=670959 https://bugzilla.novell.com/show_bug.cgi?id=670959#c0 Summary: /dev/ttyUSB* not created - firware missing? Classification: openSUSE Product: openSUSE 11.4 Version: RC 1 Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: holgi(a)novell.com QAContact: qa(a)suse.de Found By: Component Test Blocker: --- When adding following device to my machine I do not get the devices /dev/ttyUSB* added: Bus 008 Device 002: ID 06cd:0109 Keyspan USA-49W serial adapter [no firmware] This was working well with 11.3 Please tell me which further logs you need. dmesg - output: [ 7.415426] USB Serial support registered for generic [ 7.415464] usbcore: registered new interface driver usbserial_generic [ 7.415466] usbserial: USB Serial Driver core [ 7.415842] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.428941] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.428970] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.479635] USB Serial support registered for Keyspan - (without firmware) [ 7.479864] USB Serial support registered for Keyspan 1 port adapter [ 7.480078] USB Serial support registered for Keyspan 2 port adapter [ 7.480295] USB Serial support registered for Keyspan 4 port adapter [ 7.480311] keyspan 8-1:1.0: Keyspan - (without firmware) converter detected [ 7.483352] tg3.c:v3.115 (October 14, 2010) [ 7.483369] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.483379] tg3 0000:05:00.0: setting latency timer to 64 [ 7.489469] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.489473] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.489606] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.516430] usb 8-1: Required keyspan firmware image (keyspan/usa49w.fw) unavailable. [ 7.516454] usbcore: registered new interface driver keyspan [ 7.516455] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 677285] New: home:psankar:webilder: Bug
by bugzilla_noreply＠novell.com 09 Mar '11

09 Mar '11

https://bugzilla.novell.com/show_bug.cgi?id=677285 https://bugzilla.novell.com/show_bug.cgi?id=677285#c0 Summary: home:psankar:webilder: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: i586 OS/Version: openSUSE 11.3 Status: NEW Severity: Enhancement Priority: P5 - None Component: 3rd party software AssignedTo: psankar(a)novell.com ReportedBy: vazhavandan(a)sify.com QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: Customer Blocker: --- Hi kindly provide upgrade for Webilder Applet 0.6.4 to Webilder Applet 0.6.9 or Current version is 0.7, released on December 8, 2010. Ref:-http://www.webilder.org/download.html -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 677236] Buffer overflow in fsck.vfat
by bugzilla_noreply＠novell.com 09 Mar '11

09 Mar '11

https://bugzilla.novell.com/show_bug.cgi?id=677236 https://bugzilla.novell.com/show_bug.cgi?id=677236#c6 Ludwig Nussel <lnussel(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|lnussel(a)novell.com | --- Comment #6 from Ludwig Nussel <lnussel(a)novell.com> 2011-03-09 08:41:11 CET --- that would be a better, more general approach, yes. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 508347] New: Yast2 virtualization installation error but success message
by bugzilla_noreply＠novell.com 08 Mar '11

08 Mar '11

http://bugzilla.novell.com/show_bug.cgi?id=508347 Summary: Yast2 virtualization installation error but success message Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: 64bit OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: cdengler(a)novell.com QAContact: jsrain(a)novell.com Found By: Development The xen installation over the yast2 management item "virtualization" caused an error but the installation progress is finished by a success message. Step to reproduce (11.1 on 32/64 bit arch): 1. repos: dvd is set with the highest priority and no DVD is in drive OR only network repos (e.g. download.opensuse.org) but not network connection (or disabled) 2. installation xen over the yast virtualization modul 3. error is caused by missing package resource (not available through step 1.) 4. press "cancel" for all packages 5. Successfull message is shown "virtualization is installed, you can reboot" Expected: A message that the installation failed It is a misleading information for the user. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 623393] New: hard lock at boot with acpi on acer aspire 1310
by bugzilla_noreply＠novell.com 08 Mar '11

08 Mar '11

http://bugzilla.novell.com/show_bug.cgi?id=623393 http://bugzilla.novell.com/show_bug.cgi?id=623393#c0 Summary: hard lock at boot with acpi on acer aspire 1310 Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: i686 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jabber(a)gmx.org QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=376715) --> (http://bugzilla.novell.com/attachment.cgi?id=376715) acpi dump User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.6) Gecko/20100626 SUSE/3.6.6-1.2 Firefox/3.6.6 I've a acer aspire 1310. After upgrade from openSUSE 11.2 to openSUSE 11.3 boot hangs unless I'm using acpi=off or acpi=ht at a very early state. The last messages I've got are: [0.535729] ACPI: Core revision 20100121 [0.532496] ACPI: setting ELCR to 0200 (from 0e20) ... [0.564360] ACPI: but type pci registered [0.716290] PCI: Using configuration type 1 for base access [0.716566] mtrr: your CPUs had inconsistent fixed MTRR settings [0.716665] mtrr: propably your BIOS does not setup all CPUs. [0.716762] mtrr: corrected configuration. [0.720655] bio: create slab <bio-0> at 0 [0.722712] ACPI: EC: Loop up EC in DSDT After that it hangs with fan at maximum speed, no keyboard reaction e.g. on Caps-Lock or CTRL-ALT-DEL or Sys-Rq. Only power off after 4s works. With acpi=ht or acpi=off, it without power management, battery control, even power off after halt, I cannot use it. I've also tried acpi.debug_level=0xf in hope to get some more information, but nothing changed. I've also tried out kernel desktop or rt instead of default but it still hangs. Currently I've reinstalled kernel 2.6.31.12-0.2-default from openSUSE 11.2, which works fine with acpi. BTW: Producing the attached acpi dump, acpidump reported: "Wrong checksum for DSDT!" The bios is the newest version from acer. Markus Reproducible: Always Steps to Reproduce: 1. upgrade from openSUSE 11.2 to openSUSE 11.3 2. remove "quiet" from kernel parameters at grub/menu.lst 3. reboot Actual Results: hang Expected Results: boot -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 77