December 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 631319] New: intel_hda: sound stutters, aplay buffer underruns, alsa wakes for no reason
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=631319 http://bugzilla.novell.com/show_bug.cgi?id=631319#c0 Summary: intel_hda: sound stutters, aplay buffer underruns, alsa wakes for no reason Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: jslaby(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=383026) --> (http://bugzilla.novell.com/attachment.cgi?id=383026) pulseaudio -v output I have the three issues in summary, but I don't know if they are relative to each other. When I run wine, the sound played in games stutter and effects are played with delays. If I try to play with aplay, sometimes I get underruns like: underrun!!! (at least 494,491 ms long) Status: state : XRUN trigger_time: 1281894363.393273000 tstamp : 0.000000 delay : 0 avail : 5482 avail_max : 22050 underrun!!! (at least 495,794 ms long) Status: state : XRUN trigger_time: 1281894363.896136000 tstamp : 0.000000 delay : 0 avail : 5482 avail_max : 22050 underrun!!! (at least 493,886 ms long) Status: state : XRUN trigger_time: 1281894364.401600000 tstamp : 0.000000 delay : 0 avail : 5482 avail_max : 22050 Dmesgs says: [60023.911007] CE: hpet increased min_delta_ns to 128142 nsec [60026.921175] CE: hpet increased min_delta_ns to 192213 nsec [60076.712008] pulseaudio[13943]: segfault at 7f8e06c3f110 ip 00007f8e06c3f110 sp 00007fffc1e07c18 error 4 in pulse-shm-492800760[7f8e07265000+4001000] [61486.633938] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [61656.184323] hrtimer: interrupt took 3104637 ns pulseaudio sometimes says: ALSA woke us up to write new data to the device, but there was actually nothing to write! I have it only in Czech from logs: alsa-sink.c: ALSA nás probudila z důvodu zápisu nových dat na zařízení, ale ve skutečnosti nebylo co zapisovat. alsa-sink.c: S největší pravděpodobností se jedná o chybu v ovladači ALSA "snd_hda_intel". Nahlaste prosím tento problém vývojářům ALSA. alsa-sink.c: Probudilo nás nastavení POLLOUT - nicméně následné snd_pcm_avail() vrátilo 0 či jinou hodnotu < min_avail. ratelimit.c: 60 events suppressed ratelimit.c: 30 events suppressed This was 3 seconds after "IRQ timing workaround" was activated above. Then there are hundreds of "events suppressed" All the other information are hopefully in alsa-info: http://www.alsa-project.org/db/?f=2b8f40d47bc5a0ba3499ab5fdf2d8aa8ebe980f8 Note that there is PA: Running - No, but the info was probably taken while the PA process was not alive. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 631305] New: dhcrelay segfaults at first request
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=631305 http://bugzilla.novell.com/show_bug.cgi?id=631305#c0 Summary: dhcrelay segfaults at first request Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andi-nbz(a)firstfloor.org QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); de; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 Simply configuring it to listen to a tap interface and forwarding to an external dhcp server: Aug 15 11:39:10 zeitgeber dhcrelay: Internet Systems Consortium DHCP Relay Agent 4.1.1-P1 Aug 15 11:39:10 zeitgeber dhcrelay: Copyright 2004-2010 Internet Systems Consortium. Aug 15 11:39:10 zeitgeber dhcrelay: All rights reserved. Aug 15 11:39:10 zeitgeber dhcrelay: For info, please visit https://www.isc.org/software/dhcp/ Aug 15 11:39:10 zeitgeber dhcrelay: Listening on LPF/tap0/ae:b8:8b:53:fe:7c Aug 15 11:39:10 zeitgeber dhcrelay: Sending on LPF/tap0/ae:b8:8b:53:fe:7c Aug 15 11:39:10 zeitgeber dhcrelay: Sending on Socket/fallback Request comming in: Aug 15 11:39:12 zeitgeber kernel: [41110.534756] dhcrelay[6641]: segfault at 0 ip 00007f3e759de20f sp 00007fff0822b680 error 4 in dhcrelay[7f3e759d1000+6d000] Running it under gdb gives Program received signal SIGSEGV, Segmentation fault. 0x00007ffff7f9f20f in do_relay4 (ip=<value optimized out>, packet=0x7fffffffcd40, length=<value optimized out>, from_port=<value optimized out>, from=..., hfrom=<value optimized out>) at dhcrelay.c:660 660 dhcrelay.c: No such file or directory. in dhcrelay.c (gdb) bt #0 0x00007ffff7f9f20f in do_relay4 (ip=<value optimized out>, packet=0x7fffffffcd40, length=<value optimized out>, from_port=<value optimized out>, from=..., hfrom=<value optimized out>) at dhcrelay.c:660 #1 0x00007ffff7fa7e80 in got_one (h=0x7ffff820d960) at discover.c:1393 #2 0x00007ffff7fd372b in omapi_one_dispatch (wo=<value optimized out>, t=0x0) at dispatch.c:520 #3 0x00007ffff7fa9e5a in dispatch () at dispatch.c:92 #4 0x00007ffff7f9f7ec in main (argc=<value optimized out>, argv=<value optimized out>) at dhcrelay.c:549 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 631263] New: yast2 printer doesn't set default when adding printer
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=631263 http://bugzilla.novell.com/show_bug.cgi?id=631263#c0 Summary: yast2 printer doesn't set default when adding printer Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: batpul(a)gmail.com QAContact: jsmeix(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 When adding a new printer to the system with yast2 printer then yast2 doesn't set the default flag, and neither does it allow me to set this flag myself before it finishes. So I have to restart the yast2 printer module to edit the added printer to set the default flag. I would like to see that yast2 automatically enables the default flag for the first printer, or else give me an opportunity to set it myself before I click the OK button. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 630862] New: LXDM: can't login when space in password
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=630862 http://bugzilla.novell.com/show_bug.cgi?id=630862#c0 Summary: LXDM: can't login when space in password Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: LXDE AssignedTo: andrea(a)opensuse.org ReportedBy: lthuns(a)opensuse.org QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=382681) --> (http://bugzilla.novell.com/attachment.cgi?id=382681) output of lxdm.log User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.3 Firefox/3.6.8 When user has a space in his password (like "pass word"), LXDM fails to login. Login on tty1 does work. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 630736] New: autofs: update 5.0.5 upstream patches to 2010-08-10
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=630736 http://bugzilla.novell.com/show_bug.cgi?id=630736#c0 Summary: autofs: update 5.0.5 upstream patches to 2010-08-10 Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: x86 OS/Version: openSUSE 11.3 Status: ASSIGNED Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: lchiquitto(a)novell.com ReportedBy: lchiquitto(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- AutoFS upstream maintainer pushed a new set of patches to address some issues, including: * remove extra read master map call * fix "fix cache_init() on source re-read" * fix error handing in do_mount_indirect() * expire thread use pending mutex * link against krb5 library by default * make "verbose" mode a little less verbose (bug #630719) Patch list (available in http://kernel.org/pub/linux/daemons/autofs/v5/) autofs-5.0.5-remove-extra-read-master-map-call.patch autofs-5.0.5-fix-fix-cache_init-on-source-re-read.patch autofs-5.0.5-fix-error-handing-in-do_mount_indirect.patch autofs-5.0.5-expire-thread-use-pending-mutex.patch autofs-5.0.5-include-krb5-library.patch autofs-5.0.5-make-verbose-mode-a-little-less-verbose.patch We should ship these patches with the upcoming openSUSE 11.4. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 630652] New: kernel module aha152x_cs.ko missing
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=630652 http://bugzilla.novell.com/show_bug.cgi?id=630652#c0 Summary: kernel module aha152x_cs.ko missing Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jens.herden(a)email.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 I want to use my SCSI scanner but the Adaptec PC Card 1460C does not work. It used to work in openSUSE 11.2 and before. Further investigations show that the needed module aha152x_cs.ko is not available anymore. I can not find it under /lib/modules and I am not able to find a package that contains the module. :-( pccardctl shows that the pc card itself has been found and I also see entries in the sys filesystem. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 630009] New: parted failed to set type during installation
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=630009 http://bugzilla.novell.com/show_bug.cgi?id=630009#c0 Summary: parted failed to set type during installation Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: All OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: novellbmw(a)lsmod.de QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.3 Firefox/3.6.8 automated install testing of current GNOME/NET isos failed with a parted error message at 00:20 of http://www3.zq1.de/opensuse/video/openSUSE-GNOME-LiveCD-x86_64-Build0010a.o… and http://www3.zq1.de/opensuse/video/openSUSE-NET-i586-Build0010a.ogv Reproducible: Always Steps to Reproduce: 1. try installation with GNOME LiveCD Actual Results: Failure occurred during following action: Setting type of partition /dev/vda1 to 82 System error code was: -1012 /usr/sbin/parted -s '/dev/vda' set 1 type 130: /usr/sbin/parted: invalid token: type Expected Results: parted should set partition type -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 629911] New: inputattach (input-utils): syntax errors in the init script
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=629911 http://bugzilla.novell.com/show_bug.cgi?id=629911#c0 Summary: inputattach (input-utils): syntax errors in the init script Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: sbrabec(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- When trying to enable inputattach, I got a syntax error: /etc/init.d/inputattach restart /etc/init.d/inputattach: line 51: syntax error near unexpected token `)' /etc/init.d/inputattach: line 51: ` force-reload)' There are three missing ";;" at the end of case statements. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 629908] New: BUG: Bad page state in process XY pfn:3ed00
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=629908 http://bugzilla.novell.com/show_bug.cgi?id=629908#c0 Summary: BUG: Bad page state in process XY pfn:3ed00 Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: Linux Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: ohering(a)novell.com QAContact: qa(a)suse.de Found By: Outsourced Testing Blocker: --- Created an attachment (id=381909) --> (http://bugzilla.novell.com/attachment.cgi?id=381909) hwinfo-20100810.txt fresh 11.3-x86_64 on a new HP ProBook 6555b with AMD N830 cpu and 8GB ram. I get sometimes, probably during high diskio, a BUG: BUG: Bad page state in process md5sum pfn:3ed00 page:ffffea0000dbd800 count:0 mapcount:0 mapping:(null) index:0x0 page flags: 0x20000001000000(uncached) Pid: 7956, comm: md5sum Not tainted 2.6.34-12-desktop #1 Call Trace: [<ffffffff81005ca9>] dump_trace+0x79/0x340 [<ffffffff8149e612>] dump_stack+0x69/0x6f [<ffffffff810df851>] bad_page+0xb1/0x100 [<ffffffff810dfa45>] prep_new_page+0x1a5/0x1c0 [<ffffffff810dfe01>] get_page_from_freelist+0x3a1/0x640 [<ffffffff810e01af>] __alloc_pages_nodemask+0x10f/0x6b0 [<ffffffff810e35a4>] __do_page_cache_readahead+0x114/0x290 [<ffffffff810e389c>] ra_submit+0x1c/0x30 [<ffffffff810e3c38>] page_cache_async_readahead+0x98/0xe0 [<ffffffff810d95bb>] do_generic_file_read.clone.0+0x25b/0x440 [<ffffffff810daf94>] generic_file_aio_read+0xb4/0x1c0 [<ffffffff8112426f>] do_sync_read+0xbf/0x100 [<ffffffff81124a53>] vfs_read+0xb3/0x190 [<ffffffff81124b7e>] sys_read+0x4e/0x90 [<ffffffff81002ffb>] system_call_fastpath+0x16/0x1b [<00007f51336f03e0>] 0x7f51336f03e0 Disabling lock debugging due to kernel taint It was always the same page: Aug 3 BUG: Bad page state in process s2disk pfn:3ed00 Aug 3 page:ffffea0000dbd800 count:0 mapcount:0 mapping:(null) index:0x0 Aug 3 page flags: 0x20000001000000(uncached) Aug 3 Pid: 8706, comm: s2disk Not tainted 2.6.34-12-desktop #1 -- Aug 8 BUG: Bad page state in process rsync pfn:3ed00 Aug 8 page:ffffea0000dbd800 count:0 mapcount:0 mapping:(null) index:0x0 Aug 8 page flags: 0x20000001000000(uncached) Aug 8 Pid: 5523, comm: rsync Not tainted 2.6.34-12-desktop #1 -- Aug 8 BUG: Bad page state in process rsync pfn:3ed00 Aug 8 page:ffffea0000dbd800 count:0 mapcount:0 mapping:(null) index:0x0 Aug 8 page flags: 0x20000001000000(uncached) Aug 8 Pid: 8010, comm: rsync Not tainted 2.6.34-12-desktop #1 -- Aug 10 BUG: Bad page state in process md5sum pfn:3ed00 Aug 10 page:ffffea0000dbd800 count:0 mapcount:0 mapping:(null) index:0x0 Aug 10 page flags: 0x20000001000000(uncached) Aug 10 Pid: 7956, comm: md5sum Not tainted 2.6.34-12-desktop #1 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 50

[Bug 629882] New: YaST reads YCP include files 1 byte at a time
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=629882 http://bugzilla.novell.com/show_bug.cgi?id=629882#c0 Summary: YaST reads YCP include files 1 byte at a time Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: mvidner(a)novell.com ReportedBy: mvidner(a)novell.com QAContact: jsrain(a)novell.com CC: kmachalkova(a)novell.com Found By: Development Blocker: --- In discussing another bug(*), Bubli mentioned that strace output was full of lines like > [pid 8194] read(7, "b", 1) = 1 > [pid 8194] read(7, "u", 1) = 1 > [pid 8194] read(7, "s", 1) = 1 > [pid 8194] read(7, ";", 1) = 1 which clutters the output and makes stracing, if not regular runs, much slower. It turns out that for certain files, ones pulled in by the YCP include statement, input buffering is not enabled. *) http://lists.opensuse.org/yast-devel/2010-08/msg00012.html -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12