November 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 649753] New: MySQL keeps marking tables as "crashed"
by bugzilla_noreply＠novell.com 13 Nov '11

13 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=649753 https://bugzilla.novell.com/show_bug.cgi?id=649753#c0 Summary: MySQL keeps marking tables as "crashed" Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: reg(a)capiogroup.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2.11) Gecko/20101012 Firefox/3.6.11 Okay, I'm going to have to rely on one of your experts to tell me how to give you the correct information to track this down because I don't know how to at all. However, here is what I can tell you: I am running multiple web sites using Drupal setup in a multi-site setup. I have a cronjob that runs every 30 mins. or so that iterates through all the MySQL tables. If an error is reported, it then run the MySQL command to fix the error on the table it found it on. There are about databases and each database that relates to a web site, has about 150 tables. The tables that are crashing are the ones that are most frequently accessed. E.g.: cache tables and logging tables are most likely. It is occasionally but often enough to be regarded as a problem. I have run a file system check and fix on reboot to make sure it wasn't a problem of a corrupted file system however I have only done so once. I have done a check on the file system several times without a reboot just to see if there was any problems. All mounts are Ext4 except where they obviously should not be such as the swap area. I have 8GB of RAM and it never seems to get all used up so I don't ever swap file use or disk thrashing. I am using an 8 port 3ware RAID where most commonly read areas are on a RAID 5 setup and commonly written to areas, such as /var/... are on mirrored disks for faster write. Reproducible: Sometimes Steps to Reproduce: 1. I don't know how to find out exactly how to determine the cause, I have looked at the MySQL logs but couldn't see anything obvious. Perhaps a different log level would help. 2. 3. Actual Results: Corrupted MySQL tables are found on occasion. Expected Results: No tables marked corrupted. I wish I had more but if you can give me some diagnostic steps I'll be happy to do them. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 583493] New: Random screensaver setting crashes computer
by bugzilla_noreply＠novell.com 13 Nov '11

13 Nov '11

http://bugzilla.novell.com/show_bug.cgi?id=583493 http://bugzilla.novell.com/show_bug.cgi?id=583493#c0 Summary: Random screensaver setting crashes computer Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: reg(a)capiogroup.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.7) Gecko/20091222 SUSE/3.5.7-1.1 Firefox/3.5.7 I've experienced this first in openSUSE 11.0 but because I new to Linux never got around to reporting it. Now that I have installed a new 11.2 openSUSE I see the same behavior. I did extensive testing to see if it was a particular screensaver and found after much testing that it was not. It is instead something to do with one screensaver after another being run which eventually causes some screensaver to crash - which one seems to be arbitrary. Reproducible: Always Steps to Reproduce: 1. Set your system to random screensaver. 2. Let it run overnight 3. It should be crashed in the morning within 1 - 2 days. 4. Although I have had it always crash I have noticed varying times dependent on power saving settings and display off settings so you can vary these a little to reproduce if you are not having any luck. Actual Results: It will eventually lock up the computer and require you to reboot. Expected Results: Not crashed, just kept on showing screen savers. In my setup, I have NVIDIA drivers setup to with two displays connected via a dual display card, an 8600. I suspect that this is not relevant but thought that I would mention it just in case. The computer is an ASUS 64bit with 8GB RAM and a 3ware 8 port RAID card. Again, this should not be relevant but thought I would mention it. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 719684] New: xdebug will not break on a breakpoint set inside a function
by bugzilla_noreply＠novell.com 13 Nov '11

13 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=719684 https://bugzilla.novell.com/show_bug.cgi?id=719684#c0 Summary: xdebug will not break on a breakpoint set inside a function Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Major Priority: P5 - None Component: Apache AssignedTo: bnc-team-apache(a)forge.provo.novell.com ReportedBy: reg(a)seowebsales.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=452401) --> (http://bugzilla.novell.com/attachment.cgi?id=452401) phpinfo() output User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.18) Gecko/20110613 SUSE/3.6.18-0.2.1 Firefox/3.6.18 I can't tell you any more than the title really. I set a breakpoint anywhere inside a function and the xdebug won't stop. If I set a breakpoint right on a function definition line it always breaks like it should. E.g.: Given the 5 lines of code below the only place a breakpoint would work is line 1. 1 function muchomenu_edit_item($form, &$form_state, $type, $item, $menu) { 2 if ($type == 'add' || empty($item)) { 3 $menu_id = isset($menu['id']) ? $menu['id'] : 0; 4 } 5 } My setup is I am using remote debugging the client being netbeans. I can't see this having anything to do with newbeans since it does break and xdebug does show everything working right when I tail the log file it creates. I made numerous changes to the xdebug configuration switches and got no change. I will put the current setup below. Also, I'll attach a phpinfo() output so you can see the full php configuration. The one difference being is that the output you will see from phpinfo() will show xcahce enabled. When I was using xdebug xcache was disabled since optimizers can interfere with xdebug. Reproducible: Always Steps to Reproduce: 1. 2. 3. Actual Results: As I described. Expected Results: Breakpoint stop code execution wherever a breakpoint is allowed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 682904] New: X servers depend on keyboard-config
by bugzilla_noreply＠novell.com 12 Nov '11

12 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=682904 https://bugzilla.novell.com/show_bug.cgi?id=682904#c0 Summary: X servers depend on keyboard-config Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: All OS/Version: Linux Status: NEW Severity: Minor Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jengelh(a)medozas.de QAContact: qa(a)suse.de Found By: Beta-Customer Blocker: --- I think that the X server packages should depend on xkeyboard-config, because otherwise, they may fail to start or not accept input. $ vncserver You will require a password to access your desktops. Password: Warning: password truncated to the length of 8. Verify: Would you like to enter a view-only password (y/n)? n Couldn't start Xvnc; trying default font path. Please set correct fontPath in the vncserver script. Couldn't start Xvnc process. 27/03/2011 15:24:27 Xvnc version X.org/xf4vnc custom version 27/03/2011 15:24:27 Copyright (C) 2001-2004 Alan Hourihane. 27/03/2011 15:24:27 Copyright (C) 2000-2004 Constantin Kaplinsky 27/03/2011 15:24:27 Copyright (C) 1999 AT&T Laboratories Cambridge 27/03/2011 15:24:27 All Rights Reserved. 27/03/2011 15:24:27 See http://www.tightvnc.com/ for information on TightVNC 27/03/2011 15:24:27 See http://xf4vnc.sf.net for xf4vnc-specific information 27/03/2011 15:24:27 Desktop name 'X' (epsilon:1) 27/03/2011 15:24:27 Protocol versions supported: 3.7, 3.3 27/03/2011 15:24:27 RGB format 8 8 8 27/03/2011 15:24:27 Listening for VNC connections on TCP port 5901 27/03/2011 15:24:27 Listening for HTTP connections on TCP port 5801 27/03/2011 15:24:27 URL http://epsilon:5801 [dix] Could not init font path element /usr/share/fonts/local, removing from list! [dix] Could not init font path element /usr/share/fonts/100dpi:unscaled, removing from list! [dix] Could not init font path element /usr/share/fonts/Type1, removing from list! [dix] Could not init font path element /usr/share/fonts/URW, removing from list! [dix] Could not init font path element /usr/share/fonts/Speedo, removing from list! [dix] Could not init font path element /usr/share/fonts/truetype, removing from list! [dix] Could not init font path element /usr/share/fonts/uni, removing from list! [dix] Could not init font path element /usr/share/fonts/CID, removing from list! (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/base XKB: Failed to compile keymap Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config. Fatal server error: Failed to activate core devices. 27/03/2011 15:24:28 Xvnc version X.org/xf4vnc custom version 27/03/2011 15:24:28 Copyright (C) 2001-2004 Alan Hourihane. 27/03/2011 15:24:28 Copyright (C) 2000-2004 Constantin Kaplinsky 27/03/2011 15:24:28 Copyright (C) 1999 AT&T Laboratories Cambridge 27/03/2011 15:24:28 All Rights Reserved. 27/03/2011 15:24:28 See http://www.tightvnc.com/ for information on TightVNC 27/03/2011 15:24:28 See http://xf4vnc.sf.net for xf4vnc-specific information 27/03/2011 15:24:28 Desktop name 'X' (epsilon:1) 27/03/2011 15:24:28 Protocol versions supported: 3.7, 3.3 27/03/2011 15:24:28 RGB format 8 8 8 27/03/2011 15:24:28 Listening for VNC connections on TCP port 5901 27/03/2011 15:24:28 Listening for HTTP connections on TCP port 5801 27/03/2011 15:24:28 URL http://epsilon:5801 [dix] Could not init font path element /usr/share/fonts/TTF/, removing from list! [dix] Could not init font path element /usr/share/fonts/OTF/, removing from list! [dix] Could not init font path element /usr/share/fonts/Type1/, removing from list! [dix] Could not init font path element /usr/share/fonts/100dpi:unscaled, removing from list! [dix] Could not init font path element /usr/share/fonts/URW/, removing from list! [dix] Could not init font path element /usr/share/fonts/cyrillic:unscaled, removing from list! [dix] Could not init font path element /usr/share/fonts/misc/sgi:unscaled, removing from list! [dix] Could not init font path element /usr/share/fonts/truetype/, removing from list! (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/base XKB: Failed to compile keymap Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config. Fatal server error: Failed to activate core devices. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 730027] New: xorg-x11-Xvnc: should depend on xkeyboard-config
by bugzilla_noreply＠novell.com 12 Nov '11

12 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=730027 https://bugzilla.novell.com/show_bug.cgi?id=730027#c0 Summary: xorg-x11-Xvnc: should depend on xkeyboard-config Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: All OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: jengelh(a)medozas.de QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: Beta-Customer Blocker: --- Without xkeyboard-config being installed, tring to start a vncserver fails: 19:21 nas:~ > vncserver Couldn't start Xvnc; trying default font path. Please set correct fontPath in the vncserver script. Couldn't start Xvnc process. 12/11/2011 19:21:16 Xvnc version X.org/xf4vnc custom version 12/11/2011 19:21:16 Copyright (C) 2001-2004 Alan Hourihane. 12/11/2011 19:21:16 Copyright (C) 2000-2004 Constantin Kaplinsky 12/11/2011 19:21:16 Copyright (C) 1999 AT&T Laboratories Cambridge 12/11/2011 19:21:16 All Rights Reserved. 12/11/2011 19:21:16 See http://www.tightvnc.com/ for information on TightVNC 12/11/2011 19:21:16 See http://xf4vnc.sf.net for xf4vnc-specific information 12/11/2011 19:21:16 Desktop name 'X' (nas:1) 12/11/2011 19:21:16 Protocol versions supported: 3.7, 3.3 12/11/2011 19:21:16 RGB format 8 8 8 12/11/2011 19:21:16 Listening for VNC connections on TCP port 5901 12/11/2011 19:21:16 Listening for HTTP connections on TCP port 5801 12/11/2011 19:21:16 URL http://nas:5801 [dix] Could not init font path element /usr/share/fonts/local, removing from list! [dix] Could not init font path element /usr/share/fonts/100dpi:unscaled, removing from list! [dix] Could not init font path element /usr/share/fonts/Type1, removing from list! [dix] Could not init font path element /usr/share/fonts/URW, removing from list! [dix] Could not init font path element /usr/share/fonts/Speedo, removing from list! [dix] Could not init font path element /usr/share/fonts/truetype, removing from list! [dix] Could not init font path element /usr/share/fonts/uni, removing from list! [dix] Could not init font path element /usr/share/fonts/CID, removing from list! (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/base XKB: Failed to compile keymap Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config. Fatal server error: Failed to activate core devices. 12/11/2011 19:21:17 Xvnc version X.org/xf4vnc custom version 12/11/2011 19:21:17 Copyright (C) 2001-2004 Alan Hourihane. 12/11/2011 19:21:17 Copyright (C) 2000-2004 Constantin Kaplinsky 12/11/2011 19:21:17 Copyright (C) 1999 AT&T Laboratories Cambridge 12/11/2011 19:21:17 All Rights Reserved. 12/11/2011 19:21:17 See http://www.tightvnc.com/ for information on TightVNC 12/11/2011 19:21:17 See http://xf4vnc.sf.net for xf4vnc-specific information 12/11/2011 19:21:17 Desktop name 'X' (nas:1) 12/11/2011 19:21:17 Protocol versions supported: 3.7, 3.3 12/11/2011 19:21:17 RGB format 8 8 8 12/11/2011 19:21:17 Listening for VNC connections on TCP port 5901 12/11/2011 19:21:17 Listening for HTTP connections on TCP port 5801 12/11/2011 19:21:17 URL http://nas:5801 [dix] Could not init font path element /usr/share/fonts/TTF/, removing from list! [dix] Could not init font path element /usr/share/fonts/OTF/, removing from list! [dix] Could not init font path element /usr/share/fonts/Type1/, removing from list! [dix] Could not init font path element /usr/share/fonts/100dpi:unscaled, removing from list! [dix] Could not init font path element /usr/share/fonts/URW/, removing from list! [dix] Could not init font path element /usr/share/fonts/cyrillic:unscaled, removing from list! [dix] Could not init font path element /usr/share/fonts/misc/sgi:unscaled, removing from list! [dix] Could not init font path element /usr/share/fonts/truetype/, removing from list! (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/base XKB: Failed to compile keymap Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config. Fatal server error: Failed to activate core devices. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 730028] New: devel:languages:perl: Bug
by bugzilla_noreply＠novell.com 12 Nov '11

12 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=730028 https://bugzilla.novell.com/show_bug.cgi?id=730028#c0 Summary: devel:languages:perl: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: anicka(a)novell.com ReportedBy: admin(a)eregion.de QAContact: opensuse-communityscreening(a)forge.provo.novell.com CC: tabraham(a)novell.com, pgajdos(a)suse.com Found By: --- Blocker: --- the whole devel:lang:perl repo is broken right now due to roughly 900 build errors, as far as I can see all because of one package that failed to build... and that in turn blocks every single repo / project that requires devel:languages:perl.... can that please be fixed? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 729316] New: Bug: update to MozillaFirefox 8.0 'seems corrupted' or fails 'Digest verification'
by bugzilla_noreply＠novell.com 12 Nov '11

12 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=729316 https://bugzilla.novell.com/show_bug.cgi?id=729316#c0 Summary: Bug: update to MozillaFirefox 8.0 'seems corrupted' or fails 'Digest verification' Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Keywords: security, security_vulnerability Severity: Major Priority: P5 - None Component: 3rd party software AssignedTo: wolfgang(a)rosenauer.org ReportedBy: gerj15(a)fastmail.co.uk QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- zypper up MozillaFirefox Loading repository data... Reading installed packages... Resolving package dependencies... The following package is going to be upgraded: MozillaFirefox 1 package to upgrade. Overall download size: 12.8 MiB. No additional space will be used or freed after the operation. Continue? [y/n/?] (y): y Retrieving package MozillaFirefox-8.0-2.1.x86_64 (1/1), 12.8 MiB (36.7 MiB unpacked) Retrieving: MozillaFirefox-8.0-2.1.x86_64.rpm [done (266.6 KiB/s)] Package MozillaFirefox-8.0-2.1 seems to be corrupted during transfer. Do you want to retry retrieval? Abort, retry, ignore? [a/r/i] (a): r Retrieving package MozillaFirefox-8.0-2.1.x86_64 (0/1), 12.8 MiB (36.7 MiB unpacked) Retrieving: MozillaFirefox-8.0-2.1.x86_64.rpm [done (196.9 KiB/s)] Digest verification failed for MozillaFirefox-8.0-2.1.x86_64.rpm. Expected 6a3376919d1071a21ffae0e44f4ac3172e6465f609829f937ace48b9a6ac5978, found dd4fd327c098c7f9a6526fc0ffe2250bdaaa7ec149d814e55e191f02d0d44ab1. Continue? [yes/no] (no): -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 693419] New: kdm shutdown delay
by bugzilla_noreply＠novell.com 12 Nov '11

12 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=693419 https://bugzilla.novell.com/show_bug.cgi?id=693419#c0 Summary: kdm shutdown delay Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Major Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: wolfgang(a)rosenauer.org QAContact: qa(a)suse.de Found By: Community User Blocker: --- I'm using KDM and sometimes trying to shut down from there. Since openSUSE 11.4 if I click Menu at the bottom and choose Shutdown it takes around 20! seconds until the popup appears which let me choose the exact shutdown method (restart, shutdown etc). I found one kdm message in /var/log/messages but not sure if it is related: May 12 17:35:33 Hygiea kdm[1370]: Cannot execute 'grub-set-default': not in $PATH. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 693086] New: KDE reacts delayed to power button press
by bugzilla_noreply＠novell.com 12 Nov '11

12 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=693086 https://bugzilla.novell.com/show_bug.cgi?id=693086#c0 Summary: KDE reacts delayed to power button press Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: volker(a)openbios.org QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=429074) --> (http://bugzilla.novell.com/attachment.cgi?id=429074) hwinfo output User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0.0) Gecko/20100101 Firefox/4.0 Opensuse 11.4 x84-64, latest updates applied (KDE 4.6.0) It takes KDE ca 20sec to react to a acpi power button press with the configured action (e.g. shutdown, requester). During this time KDE components lock up. This renders the power button useless in KDE! Reproducible: Always Steps to Reproduce: 1. Log into kde 2. Press the acpi power button 3. wait.... 4. and wait.... On the same machine acpi power button works correctly i.e. no delay if * done in xfce desktop * done a second time in the same KDE session: Cancel the logout-prompt the first time, than press power button again. Must be a kDE thing (*sigh*) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 680741] New: Power button respons slow on HP 6730b upgraded to 11.4 KDE
by bugzilla_noreply＠novell.com 12 Nov '11

12 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=680741 https://bugzilla.novell.com/show_bug.cgi?id=680741#c0 Summary: Power button respons slow on HP 6730b upgraded to 11.4 KDE Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: telescreamer(a)hotmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0b12) Gecko/20110222 Firefox/4.0b12 Using the power button on my HP 5730b notebook to have it showing the logoff/reboot/shutdown dialog still works in 11.4 but it responds quite slow. Once I press the power button, the KDE panels become unresponsive for about 20 seconds or so, until the logoff/reboot/shutdown dialog is shown. After that the system behaves as usual. I do not have this problem when I perform the same function from the openSUSE KDE menu. With acpi_listen running I see the button pressing event appear immediately, but the system waits a while to process is, problably some kind of time out somewhere. It does work when I press perform the same action after switching to the console using ctrl-alt-F1 (still in runlevel 5 though) Reproducible: Always Steps to Reproduce: 1. press power button Actual Results: The KDE panel freezes for about 20 seconds or so before displaying the log off/shutdown/reboot dialog. Expected Results: To show the log off/shutdown/reboot dialog immediately -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 660416] New: Black screen after graphical login following installation and update to KDE SC 4.5.4 with radeon-mob 5470
by bugzilla_noreply＠novell.com 12 Nov '11

12 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=660416 https://bugzilla.novell.com/show_bug.cgi?id=660416#c0 Summary: Black screen after graphical login following installation and update to KDE SC 4.5.4 with radeon-mob 5470 Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: jmbarkei(a)googlemail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.10 (KHTML, like Gecko) Chrome/8.0.552.224 Safari/534.10 On my new DELL Inspiron 17R with Intel Core i3 350, 4 GB RAM, AMD Mobility Radeon HD 5470 (1GB G-RAM) I did an Installation of OpenSUSE 11.3 with KDE. Everything was working. Then I did an update of the system, followed by updating KDE to SC 4.5.4. To do this I moved the System from the OpenSUSE 11.3 Standard KDE-Reps to the SC 4.5.4 Upstream-Reps (Base and Extra). I also installed a number of other software while doing this. All installations and updates worked fine. But when I login as user I get a BLACK SCREEN, although for the system everything seems to work fine (NO WARNING or BUG-MESSAGE). Funny enough I get shaded squares of a context-menu when I do a right click on the desktop. Still there is no menu displayed. Could be a fault in KDE workspace, QT, X11 oder the radeon-driver. the latter is version: xorg-x11-driver-video-radeonhd, ver. 1.3.0_20100325_f6c9991-1.13, all others are the current versions available for OpenSUSE 11.3. Do I have to install the current proprietary driver for the redaon mobility 5470?? Or any other ideas?? Maybe I should add that I also, since the update, do not have graphical root access, because the update killed the necessary option in /etc/sysconfig/displaymanager. I know how to fix this in principle, but not, how to do this from the console ... I'm a bit dump at this point :-), sorry. Also, I do write this from the Windows-desktop now, since I have no Internet-access from the linux OS Please keep that in mind when answering. Sorry if this is complicated, but nevertheless thanks a lot for your help!! Jörg Reproducible: Always Steps to Reproduce: 1.install OpenSUSE 11.3 with KDE on Dell Inspiron 17R with AMD mobility radeon 5470 2. update system to KDE SC 4.5.4 from root-account. 3. login as user Actual Results: black desktop-screen, but shaded background squares of contex-menu when right clicking on desktop. still no menu itself displayed. >From the perspective of system everything seems to be okay though: no bus message or warning displayed Expected Results: Display of user desktop. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 726984] New: Latest Intel firmware causes Centrino Ultimate-N 6300 AGN Wireless to periodically crash
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=726984 https://bugzilla.novell.com/show_bug.cgi?id=726984#c0 Summary: Latest Intel firmware causes Centrino Ultimate-N 6300 AGN Wireless to periodically crash Classification: openSUSE Product: openSUSE 12.1 Version: RC 1 Platform: 64bit OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dmulder(a)suse.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Wireless stops functioning about every 5 minutes. Work around is to use the firmware that ships with 11.4 (just download the kernel-firmware package for 11.4 and copy ./lib/firmware/iwlwifi-6000-4.ucode to /lib/firmware). Probably an Intel issue. Ping me if you need more info. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 420606] zypper up/lu/patch ignores patch/pattern/product locks
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=420606 https://bugzilla.novell.com/show_bug.cgi?id=420606#c39 Matthias Hopf <mat(a)mshopf.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|zypper up/lu ignores |zypper up/lu/patch ignores |patch/pattern/product locks |patch/pattern/product locks --- Comment #39 from Matthias Hopf <mat(a)mshopf.de> 2011-11-11 17:28:23 UTC --- I just saw that the bug is about 'zypper up' - where locks seems to work fine, at least for me. However, comments seem to indicate that it's about the update process, which generically uses the 'zypper patch' semantics. Thus, the bug itself is still valid, though the subject is a bit misleading. Changing that. If you'd rather opt for a different bug report for 'zypper patch', I'll do that. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 420606] zypper up/lu ignores patch/pattern/product locks
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=420606 https://bugzilla.novell.com/show_bug.cgi?id=420606#c38 Matthias Hopf <mat(a)mshopf.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |mat(a)mshopf.de Severity|Normal |Major --- Comment #38 from Matthias Hopf <mat(a)mshopf.de> 2011-11-11 17:25:01 UTC --- Guys, this bug is open since 2008 and openSUSE 10.3 ! I'm increasing severity, as it doesn't seem from the last comments that this bug is addressed even for 12.1. One easy way to test: # zypper al kernel-* # zypper al -t patch kernel-* # zypper ll 1 | kernel-* | package | (any) 2 | kernel-* | patch | (any) # zypper patch Problem: patch:kernel-XXX.XXX conflicts with kernel-XXX < 2.6.XXX provided by kernel-XXX Solution 1: do not keep kernel-XXX Solution 2: do not install patch:kernel-XXX So yes, the packages are locked, but zypper still tries to install the patch. This should not happen. One could also argue that a lock for a package should imply a lock for patches, but I'm not insisting on that one. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 725952] New: YaST2 Software Manager Search field looks like a drop down menu
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=725952 https://bugzilla.novell.com/show_bug.cgi?id=725952#c0 Summary: YaST2 Software Manager Search field looks like a drop down menu Classification: openSUSE Product: openSUSE 12.1 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jorge.adriano(a)gmail.com QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:7.0.1) Gecko/20100101 Firefox/7.0.1 Instead of looking like a regular field to take a line of input, it looks like a drop down box, with an arrow, that you're supposed to click to get options. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 728388] New:=?UTF-8?Q?=20Simplified=20Chinese=20language=20installation=20fail=E3=80=82?=
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=728388 https://bugzilla.novell.com/show_bug.cgi?id=728388#c0 Summary: Simplified Chinese language installation fail。 Classification: openSUSE Product: openSUSE 12.1 Version: RC 2 Platform: x86 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: chanshun8(a)yahoo.com.hk QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:7.0.1) Gecko/20100101 Firefox/7.0.1 After the system installation finished,I try to use YaST2 language selection to install the Simplified Chinese language,the installation window just appeared for a short time and quit automatically ，it didn't install any packages,I need to use the zypper dup to finish the Simplified Chinese language installation process. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 666265] New: Kernel support for Amiga hard disk drive
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=666265 https://bugzilla.novell.com/show_bug.cgi?id=666265#c0 Summary: Kernel support for Amiga hard disk drive Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: i586 OS/Version: openSUSE 11.3 Status: NEW Severity: Enhancement Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: AmigaPhil(a)ping.be QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; fr; rv:1.9.2.13) Gecko/20101203 SUSE/3.6.13-0.2.1 Firefox/3.6.13 The Amiga Fast File System (affs) is supported by the kernel, but real Amiga HDD can't be accessed because of a missing Amiga partition table support. Reproducible: Always Steps to Reproduce: 1. Install an Amiga hard disk drive in the machine 2. Boot the openSUSE system 3. Check the availability of the disk with fdisk Actual Results: Linux1:~ # fdisk -l Disk /dev/sda: 2276 MB, 2276762112 bytes 71 heads, 62 sectors/track, 1010 cylinders Units = cylinders of 4402 * 512 = 2253824 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Expected Results: The tested HDD had 5 partitions which should have been shown as sda1, sda2 ... Linux1:~ # cat /boot/config-`uname -r` | grep -i affs CONFIG_AFFS_FS=m Linux1:~ # modinfo affs filename: /lib/modules/2.6.34.7-0.7-default/kernel/fs/affs/affs.ko license: GPL description: Amiga filesystem support for Linux srcversion: F7CC8EAAB523A5566DDB101 depends: vermagic: 2.6.34.7-0.7-default SMP mod_unload modversions 586TSC Linux1:~ # grep -i Amiga /boot/config-2.6.34.7-0.7-default # CONFIG_AMIGA_PARTITION is not set -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 592100] New: reiserfs file size limit is 2 TiB but expected to be 8 TiB
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

http://bugzilla.novell.com/show_bug.cgi?id=592100 http://bugzilla.novell.com/show_bug.cgi?id=592100#c0 Summary: reiserfs file size limit is 2 TiB but expected to be 8 TiB Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: jeffm(a)novell.com ReportedBy: jeffm(a)novell.com QAContact: qa(a)suse.de Found By: Development Blocker: --- The reiserfs file size is expected to be 8 TiB as documented at http://en.wikipedia.org/wiki/Comparison_of_file_systems but is limited to 2 TiB in practice. Actual results: % dd if=/dev/zero of=fs.img bs=1M count=1 seek=8388607 dd: truncating at 8796091973632 bytes in output file `fs.img': File too large %ls fs.img -rw-r--r-- 1 root root 0 2010-03-29 18:24 fs.img Expected results: Successfully create the file. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 627276] New: Banshee crashes upon clicking on album in album-view
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

http://bugzilla.novell.com/show_bug.cgi?id=627276 http://bugzilla.novell.com/show_bug.cgi?id=627276#c0 Summary: Banshee crashes upon clicking on album in album-view Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: Banshee AssignedTo: abockover(a)novell.com ReportedBy: badshah400(a)gmail.com QAContact: abockover(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-GB; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 I don't know if this is introduced by some update, but definitely did not notice it earlier. Anyway, banshee crashes frequently with this message in the terminal [Info 17:32:31.342] Running Banshee 1.6.1: [openSUSE 11.3 (linux-gnu, x86_64) @ 2010-07-06 01:08:10 UTC] [Warn 17:32:32.127] Cannot connect to NetworkManager or Wicd - An available, working network connection will be assumed [Info 17:32:32.181] All services are started 0.68138 [Info 17:32:32.840] nereid Client Started [Warn 17:32:36.363] Forcefully breaking out of RCS loop b/c change in total_width less than 1.0 Exception in Gtk# callback delegate Note: Applications can use GLib.ExceptionManager.UnhandledException to handle the exception. System.ArgumentNullException: Argument cannot be null. Parameter name: source at System.Linq.Check.SourceAndSelector (System.Object source, System.Object selector) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.Count[Column] (IEnumerable`1 source, System.Func`2 selector) [0x00000] in <filename unknown>:0 at Hyena.Data.Gui.Accessibility.ListViewAccessible`1[Banshee.Collection.AlbumInfo].get_n_columns () [0x00000] in <filename unknown>:0 at Hyena.Data.Gui.Accessibility.ListViewAccessible`1[Banshee.Collection.AlbumInfo].get_NColumns () [0x00000] in <filename unknown>:0 at Hyena.Data.Gui.Accessibility.ListViewAccessible`1[Banshee.Collection.AlbumInfo].RefAt (Int32 row, Int32 column) [0x00000] in <filename unknown>:0 at Hyena.Data.Gui.Accessibility.ListViewAccessible`1[Banshee.Collection.AlbumInfo].get_ActiveCell () [0x00000] in <filename unknown>:0 at Hyena.Data.Gui.Accessibility.ListViewAccessible`1[Banshee.Collection.AlbumInfo].OnSelectionFocusChanged (System.Object o, System.EventArgs a) [0x00000] in <filename unknown>:0 at Hyena.Collections.SelectionProxy.OnFocusChanged () [0x00000] in <filename unknown>:0 at Hyena.Collections.SelectionProxy.HandleSelectionFocusChanged (System.Object o, System.EventArgs args) [0x00000] in <filename unknown>:0 at Hyena.Collections.Selection.set_FocusedIndex (Int32 value) [0x00000] in <filename unknown>:0 at Hyena.Data.Gui.ListView`1[T].FocusModelRow (Int32 index) [0x00000] in <filename unknown>:0 at Hyena.Data.Gui.ListView`1[T].OnListButtonPressEvent (Gdk.EventButton evnt) [0x00000] in <filename unknown>:0 at Hyena.Data.Gui.ListView`1[T].OnButtonPressEvent (Gdk.EventButton evnt) [0x00000] in <filename unknown>:0 at Gtk.Widget.buttonpressevent_cb (IntPtr widget, IntPtr evnt) [0x00000] in <filename unknown>:0 at GLib.ExceptionManager.RaiseUnhandledException(System.Exception e, Boolean is_terminal) at Gtk.Widget.buttonpressevent_cb(IntPtr widget, IntPtr evnt) at Gtk.Application.gtk_main() at Gtk.Application.Run() at Banshee.Gui.GtkBaseClient.Run() at Banshee.Gui.GtkBaseClient.Startup() at Hyena.Gui.CleanRoomStartup.Startup(Hyena.Gui.StartupInvocationHandler startup) at Banshee.Gui.GtkBaseClient.Startup() at Banshee.Gui.GtkBaseClient.Startup(System.String[] args) at Nereid.Client.Main(System.String[] args) at System.AppDomain.ExecuteAssembly(System.Reflection.Assembly , System.String[] ) at System.AppDomain.ExecuteAssemblyInternal(System.Reflection.Assembly a, System.String[] args) at System.AppDomain.ExecuteAssembly(System.String assemblyFile, System.Security.Policy.Evidence assemblySecurity, System.String[] args) at System.AppDomain.ExecuteAssembly(System.String assemblyFile) at Booter.Booter.BootClient(System.String clientName) at Booter.Booter.Main() Reproducible: Always Steps to Reproduce: 1.Click on an album in the list of albums in grid-view 2.Click on another album also in the grid-view 3. Actual Results: Banshee crashes Expected Results: No crash -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 611996] New: after reboot: recovering journal
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

http://bugzilla.novell.com/show_bug.cgi?id=611996 http://bugzilla.novell.com/show_bug.cgi?id=611996#c0 Summary: after reboot: recovering journal Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: koenig(a)linux.de QAContact: qa(a)suse.de Found By: --- Blocker: --- quite often after (clean?!) reboot I get "recovering journal" for the rootfs. # df -T Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/sda2 ext3 20641788 4005120 15588028 21% / devtmpfs devtmpfs 505176 460 504716 1% /dev tmpfs tmpfs 510924 4 510920 1% /dev/shm /dev/sda3 ext3 169576700 309680 160652968 1% /home # fdisk -l Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009110e Device Boot Start End Blocks Id System /dev/sda1 1 262 2104483+ 82 Linux swap / Solaris /dev/sda2 * 263 2873 20972857+ 83 Linux /dev/sda3 2874 24321 172281060 83 Linux from boot.omsg and boot.msg: --- 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< --- Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/char/../tty1(/dev/console) at Sun Jun 6 15:37:32 2010 Trying manual resume from /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part1 Invoking userspace resume from /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part1 resume: libgcrypt version: 1.4.4 Trying manual resume from /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part1 Invoking in-kernel resume from /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part1 Waiting for device /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part2 to appear: ok fsck from util-linux-ng 2.17.2 [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda2 /dev/sda2: recovering journal /dev/sda2: Clearing orphaned inode 886598 (uid=0, gid=0, mode=0100600, size=217016) /dev/sda2: Clearing orphaned inode 615866 (uid=0, gid=0, mode=0100755, size=131400) /dev/sda2: Clearing orphaned inode 544725 (uid=0, gid=0, mode=0100755, size=106096) /dev/sda2: Clearing orphaned inode 544723 (uid=0, gid=0, mode=0100755, size=39952) /dev/sda2: Clearing orphaned inode 541798 (uid=0, gid=0, mode=0100755, size=265864) /dev/sda2: Clearing orphaned inode 541751 (uid=0, gid=0, mode=0100755, size=149975) /dev/sda2: Clearing orphaned inode 541736 (uid=0, gid=0, mode=0100755, size=1670408) /dev/sda2: Clearing orphaned inode 541899 (uid=0, gid=0, mode=0100755, size=108252) /dev/sda2: Clearing orphaned inode 541922 (uid=0, gid=0, mode=0100755, size=42889) /dev/sda2: Clearing orphaned inode 541961 (uid=0, gid=0, mode=0100755, size=61747) /dev/sda2: Clearing orphaned inode 543838 (uid=0, gid=0, mode=0100755, size=52494) /dev/sda2: Clearing orphaned inode 541834 (uid=0, gid=0, mode=0100755, size=135934) /dev/sda2: Clearing orphaned inode 544479 (uid=0, gid=0, mode=0100755, size=47294) /dev/sda2: clean, 147044/1313280 files, 1083196/5242880 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part2 mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part2 /root Boot logging started on /dev/char/../tty1(/dev/console) at Sun Jun 6 15:37:47 2010 --- 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< --- Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/char/../tty1(/dev/console) at Sun Jun 6 16:10:01 2010 Trying manual resume from /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part1 Invoking userspace resume from /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part1 resume: libgcrypt version: 1.4.4 Trying manual resume from /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part1 Invoking in-kernel resume from /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part1 Waiting for device /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part2 to appear: ok fsck from util-linux-ng 2.17.2 [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda2 /dev/sda2: recovering journal /dev/sda2: Clearing orphaned inode 886599 (uid=0, gid=0, mode=0100600, size=217016) /dev/sda2: clean, 147063/1313280 files, 1083469/5242880 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part2 mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/ata-ST3200822AS_5LJ0C1A7-part2 /root Boot logging started on /dev/char/../tty1(/dev/console) at Sun Jun 6 16:10:09 2010 --- 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< ------ 8< --- -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 20

[Bug 707654] New: 12.1 MS3 - first boot fails with btrfs
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=707654 https://bugzilla.novell.com/show_bug.cgi?id=707654#c0 Summary: 12.1 MS3 - first boot fails with btrfs Classification: openSUSE Product: openSUSE 12.1 Version: Milestone 3 Platform: i586 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: osl2008(a)googlemail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:5.0) Gecko/20100101 Firefox/5.0 Net install from loop-mounted DVD image on second machine via local network. Hardware is a Pentium-II machine with 512M & NVidia graphics, 80G HD. I selected btrfs in teh partitioner, otherwise basically a default installation. First time (same error) HD had a number of pre-existing partitions, second time I used Alt-F2 and fdisk to delete existing partitions before allowing default partitioning with btrfs. Both times installation proceeded OK until first boot, when I get (typed by hand, please excuse typos): .. fsck ... succeeded mounting root /dev/disk_by_uuid/... mount -o rw,subvol=@ -t btrfs /dev/disk_by_uuid/... mount: /dev/sda2 is not a valid block device could not mount root filesystem - exiting to /bin/sh I will try to retrieve & attach logs via a rescue system boot Reproducible: Always Steps to Reproduce: 1. select btrfs in installer - see above 2. 3. Actual Results: boot fails at rw mount of root partition Expected Results: boot continues as normal -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 357354] lenovo X60s jw collector bug (since 10.3)
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=357354 https://bugzilla.novell.com/show_bug.cgi?id=357354#c Juergen Weigert <jw(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Depends on| |729805 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 700652] New: Yast 2 incorrectly displays the messages in Russian about installing packages
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=700652 https://bugzilla.novell.com/show_bug.cgi?id=700652#c0 Summary: Yast 2 incorrectly displays the messages in Russian about installing packages Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: i586 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: freiheits(a)mail.ru QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 When you install new packages or install updates Yast 2 incorrectly displays the messages in Russian on installing packages. Next, see screenshot Reproducible: Always Steps to Reproduce: 1.install new packages or install updates using Yast 2 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 729639] New: file not found: js.spec
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=729639 https://bugzilla.novell.com/show_bug.cgi?id=729639#c0 Summary: file not found: js.spec Classification: Internal Novell Products Product: openSUSE Build Service Version: 2.3 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: webui AssignedTo: speilicke(a)suse.com ReportedBy: dvaleev(a)suse.com QAContact: adrian(a)suse.com Found By: --- Blocker: --- I've found that since today. Sources are not accessible from the WebUI example: https://build.opensuse.org/package/files?package=js&project=openSUSE%3AFact… steps to reproduce: go to the link, try to view spec or changes file -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 633101] New: Windows manager crash approximately once a day
by bugzilla_noreply＠novell.com 11 Nov '11

11 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=633101 https://bugzilla.novell.com/show_bug.cgi?id=633101#c0 Summary: Windows manager crash approximately once a day Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: rkrell(a)gmx.net QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=384368) --> (http://bugzilla.novell.com/attachment.cgi?id=384368) The Xorg.0.log.old of the previously failed session, exited by switching to console mode and rebooting as root User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.3 Firefox/3.6.8 Happens with both, the official GNOME packages from the 11.3 distribution and GNOME:Factory: Approximately once a day the windows manager exits unexpectedly, resulting in hanging the Windows around with no titles and making the task bar and rest of the desktop unusable. BTW: is the a way to restart the window manager after a crash without logging out, or even better, is there a setting to auto-restart it on crashes, like KDE does? Reproducible: Sometimes -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 727762] New: 'Starting udev...' takes ages
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=727762 https://bugzilla.novell.com/show_bug.cgi?id=727762#c0 Summary: 'Starting udev...' takes ages Classification: openSUSE Product: openSUSE 12.1 Version: RC 1 Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: zoz(a)suse.com QAContact: jsrain(a)suse.com Found By: Development Blocker: --- After copying the installation kernel and initrd from 12.1 RC1 to my lokal disk I booted into this kernel/initrd. At first it looked if the installation stopped at 'Starting udev...'. But while I started to write this bug report the installation proceeded. Nevertheless 'Starting udev...' took about 10 to 15 minutes with no signs of life (also on other consoles). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 729686] New: Pressing the delete key to delete a file does nothing
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=729686 https://bugzilla.novell.com/show_bug.cgi?id=729686#c0 Summary: Pressing the delete key to delete a file does nothing Classification: openSUSE Product: openSUSE 12.1 Version: RC 2 Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: rterry(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Selecting a file in Nautilus and pressing delete does nothing. However pressing shift+delete does delete the file. The delete key does work for deleting text (such as when changing a file name in Nautilus) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 561232] New: Nautilus windows crash if folder contains Olympus raw (.orf) files
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

http://bugzilla.novell.com/show_bug.cgi?id=561232 http://bugzilla.novell.com/show_bug.cgi?id=561232#c0 Summary: Nautilus windows crash if folder contains Olympus raw (.orf) files Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Major Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: d_rosky(a)nccn.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-1.1.2 Firefox/3.5.5 In Opensuse 11.2 (GNOME install) Nautilus windows crash (suddenly close) if the folder being viewed contains Olympus raw (.orf) files. There is no information printed to any log files. A few other comments: 1. Happens on three systems, including both 32-bit and 64-bit 2. Occasionally the window won't crash and the orf preview will be just a solid gray image, but it crashes most of the time. It appears raw thumbnailing is broken. 3. No crash occurs if there is already an existing preview (say created when image was opened in GIMP using gimp-ufraw. 4. If an orf file is on the desktop, Nautilus will go in to an infinite loop of crashing and restarting. Is there a way to disable just raw file previews in nautilus, as a temporary workaround? So far, I have to disable all previews, which is not acceptable. NOTE: the "raw-thumbnailer" package is not installed. Installing it does not seem to help. Reproducible: Always Steps to Reproduce: 1. open a folder containing olympus .orf files in Nautilus, that's it. 2. Occasionally won't crash but most of the time will. 3. Actual Results: Nautilus window closes immediately. If orf file is on desktop, Nautilus will enter infinite loop of crash-restart Expected Results: Display the folder properly Please note if there is a way to disable just raw previews in Nautilus as a temporary workaround. This is a show-stopper bug for working photo directories, and disabling all previews is not a usable workaround. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 33

[Bug 465219] ISDN Card Configuration with yast using HiSax driver does not work
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=465219 https://bugzilla.novell.com/show_bug.cgi?id=465219#c7 Swamp Workflow Management <swamp(a)suse.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Status Whiteboard|. |. | |maint:released:sle11-sp1:43 | |951 --- Comment #7 from Swamp Workflow Management <swamp(a)suse.de> 2011-11-10 19:35:58 UTC --- Update released for: ant-phone, capi4linux, capi4linux-32bit, capi4linux-devel, capi4linux-x86, i4l-base, i4l-base-debuginfo, i4l-base-debugsource, i4l-isdnlog, i4l-vbox, i4lfirm, ppp-userpass Products: SLE-DEBUGINFO 11-SP1 (i386, ia64, ppc64, s390x, x86_64) SLE-DESKTOP 11-SP1 (i386, x86_64) SLE-SDK 11-SP1 (i386, ia64, ppc64, s390x, x86_64) SLE-SERVER 11-SP1 (i386, ia64, ppc64, s390x, x86_64) SLE-SERVER 11-SP1-TERADATA (x86_64) SLES4VMWARE 11-SP1 (i386, x86_64) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 475808] symbol lookup error: /usr/lib/capi/lib_capi_mod_std.so: undefined symbol: processMessage
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=475808 https://bugzilla.novell.com/show_bug.cgi?id=475808#c15 Swamp Workflow Management <swamp(a)suse.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Status Whiteboard|. |. | |maint:released:sle11-sp1:43 | |951 --- Comment #15 from Swamp Workflow Management <swamp(a)suse.de> 2011-11-10 19:35:55 UTC --- Update released for: ant-phone, capi4linux, capi4linux-32bit, capi4linux-devel, capi4linux-x86, i4l-base, i4l-base-debuginfo, i4l-base-debugsource, i4l-isdnlog, i4l-vbox, i4lfirm, ppp-userpass Products: SLE-DEBUGINFO 11-SP1 (i386, ia64, ppc64, s390x, x86_64) SLE-DESKTOP 11-SP1 (i386, x86_64) SLE-SDK 11-SP1 (i386, ia64, ppc64, s390x, x86_64) SLE-SERVER 11-SP1 (i386, ia64, ppc64, s390x, x86_64) SLE-SERVER 11-SP1-TERADATA (x86_64) SLES4VMWARE 11-SP1 (i386, x86_64) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 683419] New: No Wireless Network with Intersil Corporation ISL3890 [Prism GT/Prism Duette]
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=683419 https://bugzilla.novell.com/show_bug.cgi?id=683419#c0 Summary: No Wireless Network with Intersil Corporation ISL3890 [Prism GT/Prism Duette] Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: i586 OS/Version: openSUSE 11.4 Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: f.leerink(a)xs4all.nl QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:2.0b12) Gecko/20110222 Firefox/4.0b12 Hello, I am still happily using my Medion MD41300 Notebook from june 2004. This Notebook is equipped with a 3,06GHz Mobile Intel Pentium 4 processor + Hyper Threading Technology, 1MB of memory and Intersil's Corporation ISL3890 [Prim GT / Prism Duette] [1260:3890] Network Controller [0280]. This Notebook was running openSUSE 10.3 and used the prism54 driver successfully for the wireless network interface. Unfortunately this 10.3 openSUSE release is no longer supported, so I tried the openSUSE 11.4 / KDE4 final release on it and that runs very well with wired network. The wireless network does not work after the install from DVD. For the wireless Network I found the following URL: http://wireless.kernel.org/en/users/Drivers/p54 and tried to use the new p54pci driver in combination KNetworkmanager without success up to now. The referenced URL asks for information if for whatever reason the new p54pci cannot be used, I send you the following info. So let me point wise state what I have done/experienced sofar.: 0 Installation of the final release of openSUSE 11.4 / KDE4 went well and works fine including wired networking via KNetworkmanager. Start up less 2 minitues, sleep functionality worked out of the box, great. 1 Identify the type of Intersil/Conexant chipset you have. Using Identifying via "lspci -nn" route: MD41300-openSUSE:/home/frans # lspci -nn -----> 03:06.0 Network controller [0280]: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] [1260:3890] (rev 01) MD41300-openSUSE:/home/frans # 2 Identify your kernel version, this can be done via: uname -r MD41300-openSUSE:/home/frans # uname -r 2.6.37.1-1.2-default MD41300-openSUSE:/home/frans # 3 Find the correct firmware for your device According to the URL, table and the kernel version I should download and rename the firmware as required for 2.6.29 kernels and above: card type required filename recommended image PCI / PCMCIA isl3886pci download 2.13.25.0.arm I have renamed the downloaded firmware file to isl3886 and copied it into the existing /lib/firmware directory. I have unloaded the diver with command modprobe -r p54pci ??? and than reload the driver via modprobe p54pci In both cases the system accepted the commands without comment. What happens if original an other driver was loaded ?? 4 I have configured KNetworkmanager for the Wireless-Home connection with a fixed IP-address 192.168.2.156, mask 255.255.255.0 , Gateway / DNS server both 192.168.2.138 and the required wireless security data and started the Wireless-Home connection after I had disconnected the network cable. KNetworkmanager showed the Wireless-Home connection as connecting and waiting on security. But checking/confirming a number of times the security pop-up screen does not change the situation - still no connection. The output of dmesg is as follows: MD41300-openSUSE:/home/frans # dmesg ...... ....... [24802.479679] eth0: link down [25751.328409] cfg80211: Calling CRDA to update world regulatory domain [25751.668892] cfg80211: World regulatory domain updated: [25751.668898] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [25751.668902] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25751.668905] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [25751.668909] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [25751.668912] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25751.668916] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25751.672598] p54pci 0000:03:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [25751.700051] ieee80211 phy0: p54 detected a LM86 firmware [25751.700062] p54: rx_mtu reduced from 3240 to 2376 [25751.700068] ieee80211 phy0: FW rev 2.13.25.0 - Softmac protocol 5.9 [25751.700074] ieee80211 phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [25752.553120] ieee80211 phy0: hwaddr 00:60:b3:1e:5a:fd, MAC:isl3890 RF:Frisbee [25752.732041] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [25752.738619] Registered led device: p54-phy0::assoc [25752.739294] Registered led device: p54-phy0::tx [25752.739867] Registered led device: p54-phy0::rx [25752.740040] Registered led device: p54-phy0::radio [25752.740040] p54pci 0000:03:06.0: is registered as 'phy0' [25753.778369] ADDRCONF(NETDEV_UP): wlan0: link is not ready [26679.493804] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 1) [26679.692041] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 2) [26679.892119] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 3) [26680.092327] wlan0: direct probe to 00:0a:e9:0f:0d:99 timed out [26689.630424] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 1) [26689.828929] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 2) [26690.028297] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 3) [26690.228041] wlan0: direct probe to 00:0a:e9:0f:0f:c7 timed out [26699.764302] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 1) [26699.962465] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 2) [26700.160040] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 3) [26700.360075] wlan0: direct probe to 00:0a:e9:0f:0d:99 timed out [26724.737189] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 1) [26724.936414] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 2) [26725.136088] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 3) [26725.336102] wlan0: direct probe to 00:0a:e9:0f:0f:c7 timed out [26734.896072] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 1) [26735.092351] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 2) [26735.292048] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 3) [26735.492238] wlan0: direct probe to 00:0a:e9:0f:0d:99 timed out [26745.036877] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 1) [26745.236040] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 2) [26745.436060] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 3) [26745.636097] wlan0: direct probe to 00:0a:e9:0f:0f:c7 timed out [28103.089697] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 1) [28103.289332] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 2) [28103.488109] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 3) [28103.688040] wlan0: direct probe to 00:0a:e9:0f:0f:c7 timed out [28113.225844] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 1) [28113.424040] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 2) [28113.624066] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 3) [28113.824183] wlan0: direct probe to 00:0a:e9:0f:0d:99 timed out [28123.360901] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 1) [28123.560040] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 2) [28123.760043] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 3) [28123.960040] wlan0: direct probe to 00:0a:e9:0f:0f:c7 timed out [28498.821799] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 1) [28499.020106] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 2) [28499.220041] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 3) [28499.420337] wlan0: direct probe to 00:0a:e9:0f:0d:99 timed out [28508.960879] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 1) [28509.160087] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 2) [28509.360040] wlan0: direct probe to 00:0a:e9:0f:0f:c7 (try 3) [28509.560025] wlan0: direct probe to 00:0a:e9:0f:0f:c7 timed out [28519.092895] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 1) [28519.293939] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 2) [28519.492266] wlan0: direct probe to 00:0a:e9:0f:0d:99 (try 3) [28519.692104] wlan0: direct probe to 00:0a:e9:0f:0d:99 timed out MD41300-openSUSE:/home/frans # I also noticed that, after the installation of openSUSE 11.4 and also after a shutdown/boot cycle, yast/network-devices/network-settings showed (network controlled via networkmanager) the wired network card and also mentioned the wireless card correctly but stated that kernel WLAN0 device is not present (mostly due to missing firmware). After the modprobe p54pci command that message disappeared, it shows the wireless networkcard as not connected, the mac address and the bus-id. The iwconfig command shows the following: MD41300-openSUSE:/home/frans # /usr/sbin/iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"Wireless-Home" Mode:Managed Frequency:2.412 GHz Access Point: Not- Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off The iwlist scan command shows the following (My assess point (cell 01) and the repeater (cell 02)) MD41300-openSUSE:/home/frans # /usr/sbin/iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: 00:0A:E9:0F:0F:C7 Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-129 dBm Encryption key:on ESSID:"Wireless-Home" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=00000028aa5551f7 Extra: Last beacon: 184ms ago IE: Unknown: 000D576972656C6573732D486F6D65 IE: Unknown: 010482848B96 IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 32080C1218243048606C IE: Unknown: 050400010000 Cell 02 - Address: 00:0A:E9:0F:0D:99 Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-129 dBm Encryption key:on ESSID:"Wireless-Home" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000084b1afd81f6 Extra: Last beacon: 224ms ago IE: Unknown: 000D576972656C6573732D486F6D65 IE: Unknown: 010482848B96 IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 32080C1218243048606C IE: Unknown: 050400010000 Cell 03 - Address: B4:82:FE:3B:5D:7D Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-129 dBm Encryption key:on ESSID:"Thomson3B5D7D" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=000006704370318d Extra: Last beacon: 140ms ago IE: Unknown: 000D54686F6D736F6E334235443744 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 050400030000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 2D1A0C181BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1601001100000000000000000000000000000000000000 IE: Unknown: DD0E0050F204104A0001101044000102 IE: Unknown: DD09001018020000050000 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F2020101880003A4000027A4000042435E0062322F00 IE: Unknown: DD1E00904C330C181BFFFF000000000000000000000000000000000000000000 IE: Unknown: DD1A00904C3401001100000000000000000000000000000000000000 MD41300-openSUSE:/home/frans # What can I do to help the resolution of this problem. Do you need other information? Awaiting your reply. Regards, Frans Reproducible: Always Steps to Reproduce: 1.Happens after openSUSE 11.4 install and also after each Shutdown-Boot cycle 2.As described in Details above 3. 2. 3. Actual Results: Networkmanager showed the Wireless-Home connection as connecting and waiting on security. But checking/confirming a number of times the security pop-up screen does not change the situation - still no connection. Expected Results: A working Wireless-Home connection -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 726896] New: x server (kdm) does not start after upgrade to RC1 on Acer aspire One 522
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=726896 https://bugzilla.novell.com/show_bug.cgi?id=726896#c0 Summary: x server (kdm) does not start after upgrade to RC1 on Acer aspire One 522 Classification: openSUSE Product: openSUSE 12.1 Version: RC 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: dutchkind(a)txoriaskea.org QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:8.0) Gecko/20100101 Firefox/8.0 On the Acer aspire One 522 with AMD C50 processor and ATI video card, in beta1 I could start with nomodeset in grub, but after upgrading to RC1 X will not start anymore. I can login as root and then run startx, and the graphical system with KDE then starts and runs without any problem, but for normal users I have not been able to start a graphical session. As a side note, I discovered that a boot in Beta1 would hang with the graphical splash screen enabled, no boot splash screen in grub started the system OK, in combination of nomodeset Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 29

[Bug 710736] New: python urllib does not use no_proxy when it has blanks
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=710736 https://bugzilla.novell.com/show_bug.cgi?id=710736#c0 Summary: python urllib does not use no_proxy when it has blanks Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: chris(a)computersalat.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.18) Gecko/20110613 SUSE/3.6.18-0.2.1 Firefox/3.6.18 if you difine your no_proxy var as mentioned in /etc/sysocnfig/proxy # Example: NO_PROXY="www.me.de, do.main, localhost" then python's urllib will never make use of it, cause there are blanks. urllib does not remove blanks. Reproducible: Always Steps to Reproduce: 1.try it out 2. 3. Actual Results: proxy will not be bypassed Expected Results: proxy should be bypassed -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 729332] New: Clock applet does not allow changing location - 12.1RC2 on VMplayer.
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=729332 https://bugzilla.novell.com/show_bug.cgi?id=729332#c0 Summary: Clock applet does not allow changing location - 12.1RC2 on VMplayer. Classification: openSUSE Product: openSUSE 12.1 Version: Factory Platform: VMWare OS/Version: SuSE Other Status: NEW Severity: Major Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: carlos.e.r(a)opensuse.org QAContact: qa(a)suse.de Found By: --- Blocker: --- Clock applet does not allow changing location - 12.1RC2 on VMplayer. Host: 11.4 Guest: 12.1 RC2 Environ: VMWare player. Running gnome fallback desktop. Right click on the clock applet. Preferences. Location tabs show empty locations, not possible to add any. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 729213] New: RPM fails to install a package from OBS (says "bad file descriptor")
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=729213 https://bugzilla.novell.com/show_bug.cgi?id=729213#c0 Summary: RPM fails to install a package from OBS (says "bad file descriptor") Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: anixx(a)opensuse.org QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; ru; rv:1.9.1.19) Gecko/20110420 SUSE/2.0.14-0.2.1 SeaMonkey/2.0.14 In KDE:KDE3 I have 7 packages failing due to a strange error during the dependencies installation phase: installing kdemultimedia3-video-3.5.10.1-20.6 error: unpacking of archive failed on file /opt/kde3/share/apps/noatun/skins/kjofol/phong/p_main.png;4eb84555: cpio: read failed - Bad file descriptor error: kdemultimedia3-video-3.5.10.1-20.6.i586: install failed (for example, here: https://build.opensuse.org/package/live_build_log?arch=i586&package=kde3-am… ) This happens only on i586 architecture and only for 12.1 (does not happen in Factory). The package kdemultimedia3-video itself builds well and without any error. I tried rebuild several times, but this does not help. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 663902] New: devel:languages:python/python-sqlalchemy: Bug
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=663902 https://bugzilla.novell.com/show_bug.cgi?id=663902#c0 Summary: devel:languages:python/python-sqlalchemy: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: jmatejek(a)novell.com ReportedBy: speilicke(a)novell.com QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- Hi, the license header of this package does not state under which license the package itself is licensed. It only states that the license is not to be modified. The copyright lines are fine, just the descriptive text below. It would be great if you could change this into a proper license header. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 728399] New: Mounting medium dialog, Open with files or Eject.
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=728399 https://bugzilla.novell.com/show_bug.cgi?id=728399#c0 Summary: Mounting medium dialog, Open with files or Eject. Classification: openSUSE Product: openSUSE 12.1 Version: RC 2 Platform: x86 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: chanshun8(a)yahoo.com.hk QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:7.0.1) Gecko/20100101 Firefox/7.0.1 It‘s not a bug!but this was an incommode function，hope remove this dialog in the final openSUSE 12.1. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 539351] New: yast2 sw_single warns about a lack of space on an autofs root
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

http://bugzilla.novell.com/show_bug.cgi?id=539351 Summary: yast2 sw_single warns about a lack of space on an autofs root Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jeffm(a)novell.com QAContact: jsrain(a)novell.com Found By: Development Created an attachment (id=318366) --> (http://bugzilla.novell.com/attachment.cgi?id=318366) y2logs I have autofs mounted at /net (/etc/auto.net). When I went to install the kernel development pattern, it warned me that it needed 58kB more on /net. Nothing should have been put in /net anyway and the installation succeeded, but the warning shouldn't have been issued. galileo:/var/log # df /net -T Filesystem Type 1K-blocks Used Available Use% Mounted on - - 0 0 0 - /net galileo:/var/log # grep /net /proc/mounts /etc/auto.net /net autofs rw,relatime,fd=5,pgrp=2894,timeout=600,minproto=5,maxproto=5,indirect 0 0 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 708994] New: rubygem-polkit depends on PolicyKit
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=708994 https://bugzilla.novell.com/show_bug.cgi?id=708994#c0 Summary: rubygem-polkit depends on PolicyKit Classification: openSUSE Product: openSUSE 12.1 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: dmacvicar(a)novell.com ReportedBy: lnussel(a)novell.com QAContact: qa(a)suse.de Blocks: 697010 Found By: --- Blocker: --- PolicyKit is deprecated in favor of polkit. The goal is to finally get rid of PolicyKit for the next openSUSE release. Please port your package to polkit. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 725468] New: Yast should not offer only a subset of keyboard layouts
by bugzilla_noreply＠novell.com 10 Nov '11

10 Nov '11

https://bugzilla.novell.com/show_bug.cgi?id=725468 https://bugzilla.novell.com/show_bug.cgi?id=725468#c0 Summary: Yast should not offer only a subset of keyboard layouts Classification: openSUSE Product: openSUSE 12.1 Version: Beta 1 Platform: Other OS/Version: openSUSE 11.4 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ploum(a)ploum.net QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:7.0) Gecko/20100101 Firefox/7.0 For Whatever reason, Yast decided that the range of keyboard layouts offered by X.org is too big. Thus, only a subset is available. This make it nearly impossible to install OpenSuse if your layout didn't had the chance to be selected. Also, borrowing a keyboard only for the installation is not an option since console and GDM will keeps this layout forever (unless you know what to change afterward but it is far from trivial). Reproducible: Always Steps to Reproduce: 1. Use a keyboard not listed in Yast (mine is a French Bépo keyboard) 2. Try to install OpenSuse 3. Cry Expected Results: All keyboards layout available in X.org should be available in Yast. Or maybe Yast should just uses the keyboard layout configured by the desktop. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6