September 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 555056] New: radeonhd: severely corrupt screen
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=555056 User riggwelter(a)opensuse.org added comment http://bugzilla.novell.com/show_bug.cgi?id=555056#c9 Summary: radeonhd: severely corrupt screen Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Critical Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: riggwelter(a)opensuse.org QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Created an attachment (id=327253) --> (http://bugzilla.novell.com/attachment.cgi?id=327253) Xorg.0.log Upgraded my wife's laptop to 11.2 from 11.1 - tried both a fresh install and then installing 11.1 and upgrading and the same happened - in the case of the fresh install it was after the first reboot during install, in the latter case when zypper dup had finished and I rebooted: When X starts, the screen just goes a mixture of black and white eventually being fully black - it was fine in 11.1. I tried upgrading to the latest drivers in X11:Drivers:Video but it made no difference. Will attach Xorg.0.log along with hwinfo --gfx. If it helps, I've put a photo of the screen at http://jamesthevicar.com/images/jpg/radeonhd-corrupt.jpg hwinfo --gfx follows: rabbit:~ # hwinfo --gfx 25: PCI 105.0: 0300 VGA compatible controller (VGA) [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_1002_7942 Unique ID: ul7N.ns4ZFNHGmS9 Parent ID: vSkL.nzdltcNgfQ3 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0 SysFS BusID: 0000:01:05.0 Hardware Class: graphics card Model: "ATI Radeon Xpress 1250" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x7942 "Radeon Xpress 1250" SubVendor: pci 0x144d "Samsung Electronics Co Ltd" SubDevice: pci 0xc034 Memory Range: 0xc0000000-0xcfffffff (rw,prefetchable) Memory Range: 0xd0000000-0xd000ffff (rw,non-prefetchable) I/O Ports: 0x9000-0x9fff (rw) IRQ: 18 (2 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00001002d00007942sv0000144Dsd0000C034bc03sc00i00" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #9 (PCI bridge) Primary display adapter: #25 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 556494] New: Artifacts when KDE Composit Effects enabled
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=556494#c0 Summary: Artifacts when KDE Composit Effects enabled Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: 32bit OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: a.baeurle(a)web.de QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-2.2 Firefox/3.5.5 When enabling KWIN Composit effects after shut Menus, windows, or their movement artifacts occur in the form of stripes, lines etc. My Graka Radeon X1950 I use the radeon driver NOT hdradeon(it freezes my System)! Reproducible: Always Steps to Reproduce: enabling KWIN effects Actual Results: After closing the windows and menus remain the color bands(lines) of the window.. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 31

[Bug 577814] New: radeonhd [RS780M/RS780MN/HD 3200] System freeze during Xserver startup
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=577814 http://bugzilla.novell.com/show_bug.cgi?id=577814#c0 Summary: radeonhd [RS780M/RS780MN/HD 3200] System freeze during Xserver startup Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Critical Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: publio.escipion.el.africano(a)gmail.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com CC: publio.escipion.el.africano(a)gmail.com Depends on: 564953 Found By: --- Blocker: --- +++ This bug was initially created as a clone of Bug #564953 +++ Created an attachment (id=332784) --> (http://bugzilla.novell.com/attachment.cgi?id=332784) HP Pavilion tx2532la hardware information. User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; es-ES; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-1.1.2 Firefox/3.5.5 As I lately stated at https://bugzilla.novell.com/show_bug.cgi?id=564953#c11 "Hello. Everything was fine till I updated the original kernel 2.6.31.5 to 2.6.31.8-0.1-desktop through Online Update. The radeonhd from http://download.opensuse.org/repositories/X11:/Drivers:/Video/openSUSE_11.2… hangs the computer as referred above. So, I do not know what to do: 1) radeonhd hangs my computer: we are back to the begining; 2) fbdev provides me a low resolution (it is really uncomfortable in a 12.1" screen) and does not let me rotate the screen; 3) ATI's fglrx 8.661 from ATI's repository is not updated to 2.6.31.8-0.1-desktop, and its equivalent Catalyst 9.10 from ATI's web doesn't compile for 2.6.31.8-0.1-desktop. Catalyst 9.11 & 9.12 do compile for 2.6.31.8-0.1-desktop, but at the time I need to rotate my screen the module fails as you might see at http://4.bp.blogspot.com/_sb19rCnmVKU/S0-2R0bTvpI/AAAAAAAAAMk/LgGoQzOXTTo/s… (I am aware that this issue is not of your concern: it is just a comment to illustrate my profound frustration), and, although I have reported this issue to AMD/ATI and the fglrx Community, it seems they do not care about. Thus, I have to chose between downgrading my kernel and left unfix some issues, although gain the option to have a working radeonhd/fglrx-8.661, or upgrade the kernel to get solved some issues but be restricted to use a Tablet PC as a common PC or risk to hang my SO, or lost the video. I'll downgrade for now. Suggest me what to do next concerning this bug (do I have to re-open this or open a new one?) so I could help you as much as I could to solve this issue. I am very sorry for bother you again, and I give you my thanks for your help in advance: Thanks." Reproducible: Always Steps to Reproduce: 1. update kernel to 2.6.31.8 (certaintly, into a HP Pavilion tx2532la) 2. 3. Actual Results: The system aborts, black screen, unresponsive to Ctrl+Alt+Backspace and ACPI stimuli. Expected Results: Working system. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 545993] New: no xorg.conf after install leaving very slow X server
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=545993 Summary: no xorg.conf after install leaving very slow X server Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 8 Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kwbolte(a)gmx.de QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-2.1 Firefox/3.5.3 After installation of MS8 I felt my X / KDE4 *very* slow (without desctop effects). The reason was the missing xorg.conf, after letting sax creating one, everything was fine. The system ist a Lenovo Thinkpad T60 with ATI X1300, now working with radeonhd driver. Reproducible: Didn't try Steps to Reproduce: 1. Install -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 28

[Bug 548140] New: System freezes when enabling KWIN effects - radeonhd X1300
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=548140 Summary: System freezes when enabling KWIN effects - radeonhd X1300 Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: 32bit OS/Version: openSUSE 11.2 Status: NEW Severity: Critical Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: jux(a)4950.net QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.0.14) Gecko/2009090900 SUSE/3.0.14-0.1.2 Firefox/3.0.14 After creating a new xorg.conf with "sax2 -r" (radeonhd, ATI X1300, Lenovo T60) and enabling desktop effects X crashes and leaves a non responding system. Reproducible: Always Steps to Reproduce: 1. Recreate xorg.conf with "sax2 -r" 2. Enable desktop effects 3. Actual Results: System freezes recreating xorg.conf on this graphic card is needed due to bug 545993 - otherwise Xorg is extremly slow -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 35

[Bug 556272] New: Screen flickers on and off in Xinerama mode with Readeon HD driver
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=556272#c0 Summary: Screen flickers on and off in Xinerama mode with Readeon HD driver Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: 64bit OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: doug(a)foruminfosystems.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- Created an attachment (id=328011) --> (http://bugzilla.novell.com/attachment.cgi?id=328011) Original X.org setup when primary flickered on and off User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.4) Gecko/20091016 SUSE/3.5.4-1.1.2 Firefox/3.5.4 I have two monitors, one analog (Viewsonic GS790) and one digital (vg2230wm). On attempting to set up Xinerama (dual head mode), the analog screen was ok, but the digital screen (primary) would cycle on and off sporadically, never staying illuminated for more than 40 seconds before shutting down and restarting after about 10 seconds. This behavior was the default for both using Xinerama and not using it and configuring it through KDE. Using the ATI driver resulted in the Analog screen going blank after configuration with SAX2 (using SAX2 -r -m 0=fglrx) to configure it. Although it original displayed after reboot, after changing it from a clone of screen 1, it proceeded to blank (although the power light would stay green and not go into powersave (yellow)) when this occured. Reproducible: Always Steps to Reproduce: 1.see details 2. 3. Actual Results: primary screen flickers on and off sporadically for 10 seconds, stays active for as much as 40 seconds before flickering blank using default X.ORG driver. Using ATI driver, secondary monitor stays blank but primary no longer blinks. Expected Results: Primary and secondary monitors should both display without cycling blank and back to the screen. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 559816] New: taking whole-screen screenshot using import -screen crashes X w/ compositing on Intel
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=559816 http://bugzilla.novell.com/show_bug.cgi?id=559816#c0 Summary: taking whole-screen screenshot using import -screen crashes X w/ compositing on Intel Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: pbaudis(a)novell.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- I have: 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) ..and I use the 'intel' driver. KDE4 enabled fancy compositing on my system on 11.2, and it works nicely, except that when I run `import -screen` (usually to attach a screenshot to some other bugreport ;), it brings whole X down. When X restarts, all works fine again. This appears in the log: Backtrace: 0: /usr/bin/Xorg(xorg_backtrace+0x37) [0x81396c7] 1: /usr/bin/Xorg(xf86SigHandler+0xa0) [0x80cf7c0] 2: [0xffffe400] 3: /usr/lib/xorg/modules//libfb.so(fbBlt+0xc00) [0xb6fd15c0] 4: /usr/lib/xorg/modules//libfb.so(fbBltStip+0x7b) [0xb6fd185b] 5: /usr/lib/xorg/modules//libfb.so(fbGetImage+0x299) [0xb6fd7049] 6: /usr/lib/xorg/modules//drivers/intel_drv.so(uxa_get_image+0x133) [0xb71006a3] 7: /usr/bin/Xorg [0x8128236] 8: /usr/bin/Xorg(ProcGetImage+0x61d) [0x808e51d] 9: /usr/bin/Xorg(Dispatch+0x35f) [0x808dccf] 10: /usr/bin/Xorg(main+0x395) [0x8071f85] 11: /lib/libc.so.6(__libc_start_main+0xfe) [0xb72c4ace] 12: /usr/bin/Xorg [0x8071451] Fatal server error: Caught signal 11. Server aborting I will attach the complete Xorg.log. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 573824] New: no reaction on mouse events after resume from s2disk
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=573824 http://bugzilla.novell.com/show_bug.cgi?id=573824#c0 Summary: no reaction on mouse events after resume from s2disk Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: estellnb(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.1.6) Gecko/20091201 SUSE/3.5.6-1.1.1 Firefox/3.5.6 After resume from s2disk it was possible to move the mouse but KDE did not react upon klicks. Starting an xterm from vt02: It could receive keyboard events. Restarting kwin from that xterm: Window resizing worked for a while; Thunderbird started to react upon mouse events; restarting kicker: Still no reaction on keyboard and mouse events by any other program Issuing dcop ksmserver ksmserver logout 0 0 0 from vt02 the logout was performed without problems. KDM & re-login behaved normal. kernel: 2.6.32.3-0.0.54.db4e2be-desktop Reproducible: Sometimes -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 539509] New: Synaptics Touchpad tapping does not work
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=539509 Summary: Synaptics Touchpad tapping does not work Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: jan(a)halasa.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.13) Gecko/2009080200 SUSE/3.0.13-0.1.2 Firefox/3.0.13 I have tried 11.2 Milestone 7 live CD (KDE) on my two notebooks and the Synaptics touchpad tapping does not work on them as it used to work in 10.3 - three finger tap was right click and two finger tap was middle button click. It does not work in 11.0 and 11.1 either (but it does in Ubuntu 9.04) and I was not able to make it work. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 547961] New: Blank screen when using RadeonHD
by bugzilla_noreply＠novell.com 11 Sep '10

11 Sep '10

http://bugzilla.novell.com/show_bug.cgi?id=547961 Summary: Blank screen when using RadeonHD Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Major Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: mcarrion(a)novell.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: Beta-Customer I just installed 11.2RC1 and basically the screen goes blank after booting the first time (post-configuration). I used ncurses-based installer to install it, otherwise it just crashes and you can't do anything :(. My lscpi: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] HP Pavilion TX 2500z (ATI Radeon HD 3200) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 42