openSUSE Bugs August 2010

bugs@lists.opensuse.org

1 participants
4588 discussions

[Bug 601779] New: 32bit 'tree' doesn't show files 2GB and larger
by bugzilla_noreply＠novell.com 28 Apr '16

28 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=601779 http://bugzilla.novell.com/show_bug.cgi?id=601779#c0 Summary: 32bit 'tree' doesn't show files 2GB and larger Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jc(a)ymmv.dk QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100317 SUSE/3.5.9-0.1.1 Firefox/3.5.9 Hi On 32bit systems the 'tree' command dosn't show 'large' files. I have tested on a 64bit system as well, and the problem is only present on 32bit systems. I have done a fair amount of research, comparing compile-time arguments with those of 32bit Debian packages. In the end I think it comes down to the 'spec' file: In tree.spec the 'make' command is: %build make CFLAGS="$RPM_OPT_FLAGS" -which overrides the CFLAGS set in the Makefile: CFLAGS=-O2 -Wall -fomit-frame-pointer -DLINUX -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -which results in the binary being built with these flags instead: RPM_OPT_FLAGS="-O2 -g -m32 -march=i586 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables" Now; If I change the spec file so that; %build make -then the compiler gets the flags as set in the Makefile, and the resulting binary works with files larger than 2G. I'm guessing that it's desirable to get $RPM_OPT_FLAGS passed to the compiler, but I'm unsure as to how one would 'merge' this variable with $CFLAGS from the Makefile? As for the severity of the bug: It doesn't break the system, but the functionality of the command is seriously hampered by this. It seems reasonable (to me) that it's a packaging bug, and therefore it should be easily fixed. I have confirmation from the opensuse(a)opensuse.org list that the bug is present on 11.0, so it seems to be an 'old' problem... Kind Regards, Jon Clausen Reproducible: Always Steps to Reproduce: 1. get or create a file larger than 2GB I used 'dd' to create two files - one 2GB, one 1KB smaller: dd if=/dev/zero of=2G bs=1k count=2097152 dd if=/dev/zero of=2G-1k bs=1k count=2097151 2. use 'tree /path/to/large/file' 3. observe output Actual Results: output from 32bit system: jon@nx8220:~> ll tmp/largefiles/ total 4194304 -rw-r--r-- 1 jon users 2147483648 2010-04-30 12:50 2G -rw-r--r-- 1 jon users 2147482624 2010-04-30 12:52 2G-1k jon@nx8220:~> tree tmp/largefiles/ tmp/largefiles/ `-- 2G-1k 0 directories, 1 file Expected Results: output from 64bit system: jon@cnu8092slm:~> ll tmp/largefiles/ total 4194304 -rw-r--r-- 1 jon users 2147483648 2010-04-30 12:58 2G -rw-r--r-- 1 jon users 2147482624 2010-04-30 12:58 2G-1k jon@cnu8092slm:~> tree tmp/largefiles/ tmp/largefiles/ |-- 2G `-- 2G-1k 0 directories, 2 files AFAICT the flag that makes the difference is -D_FILE_OFFSET_BITS=64 - which makes the binary use *stat64() rather than *stat() when files are 'large'. On 64bit systems I suppose everything uses *stat64() anyways, which is why the problem only surfaces on 32bit systems... ? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 578994] New: hwinfo cuts off list of cpu features
by bugzilla_noreply＠novell.com 28 Apr '16

28 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=578994 http://bugzilla.novell.com/show_bug.cgi?id=578994#c0 Summary: hwinfo cuts off list of cpu features Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: HMWiesinger(a)gmx.at QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.1 (like Gecko) The list of supported features is cut off at some point. hwinfo (16.10) shows the following list: Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36, clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc, arch_perfmon,pebs,bts,rep_good,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx, smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse whereas "cat /proc/cpuinfo" shows: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida tpr_shadow vnmi flexpriority Reproducible: Always Steps to Reproduce: 1. hwinfo --cpu 2. cat /proc/cpuinfo 3. compare output -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 559704] New: gnome-web-photo doesn't work because it can't find libxul.so
by bugzilla_noreply＠novell.com 27 Apr '16

27 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=559704 http://bugzilla.novell.com/show_bug.cgi?id=559704#c0 Summary: gnome-web-photo doesn't work because it can't find libxul.so Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: arizonagroovejet(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-1.1.2 Firefox/3.5.5 mike@continuity:/tmp$ gnome-web-photo http://news.bbc.co.uk foo.png gnome-web-photo: error while loading shared libraries: libxul.so: cannot open shared object file: No such file or directory Reproducible: Always Steps to Reproduce: 1. Try and use gnome-web-photo Actual Results: Error message as shown above. Expected Results: That it works. It can be made to work like this: mike@continuity:/tmp$ LD_LIBRARY_PATH="/usr/lib/xulrunner-1.9.1.5/" gnome-web-photo http://news.bbc.co.uk foo.png *** nss-shared-helper: Shared database disabled (set NSS_USE_SHARED_DB to enable). mike@continuity:/tmp$ identify foo.png foo.png PNG 1024x1710 1024x1710+0+0 8-bit DirectClass 530kb -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 578053] New: postgresql-plperl looks for libperl.so in the wrong place
by bugzilla_noreply＠novell.com 27 Apr '16

27 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=578053 http://bugzilla.novell.com/show_bug.cgi?id=578053#c0 Summary: postgresql-plperl looks for libperl.so in the wrong place Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: eggyknap(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US) AppleWebKit/532.8 (KHTML, like Gecko) Chrome/4.0.299.0 Safari/532.8 On a completely new openSUSE 11.3 machine, I installed the postgresql-server, postgresql, and postgresql-plperl packages. After starting PostgreSQL and letting it initialize a new database, I sudo-d to the postgres user, and tried to add the PL/Perl language, as follows, with the error below: postgres@linux-e16r:~> createlang plperl createlang: language installation failed: ERROR: could not load library "/usr/lib/postgresql/plperl.so": libperl.so: cannot open shared object file: No such file or directory libperl.so lives in /usr/lib/perl5/5.10.0/i586-linux-thread-multi/CORE/libperl.so. Creating a symlink at /usr/lib/libperl.so to the installed libperl.so binary works around the problem. This also exists in at least one of the 10.x versions, though I don't have access to the servers to know the precise version(s) As a secondary note, the description of the postgresql-plperl package, at least as it appears in YaST2, says the package also includes PL/Tcl and PL/Python. This is incorrect. Thirdly, the documentation also claims "PostgreSQL also offers the builtin procedural language PL/SQL". This is also incorrect -- PL/SQL is an Oracle-specific language. PostgreSQL offers PL/pgSQL, which fact might be worth noting in the PL/Perl documentation, or it might not. Reproducible: Always Steps to Reproduce: 1.install postgresql, postgresql-server, and postgresql-plperl 2.start postgresql (/etc/init.d/postgresql start) 3.become the postgres user (sudo su - postgres) 4.create the plperl language in the default database: createlang plperl Actual Results: # createlang plperl createlang: language installation failed: ERROR: could not load library "/usr/lib/postgresql/plperl.so": libperl.so: cannot open shared object file: No such file or directory Expected Results: createlang should have no output, and a 0 exit status I realize this is a packaging bug, and likely not something distributed by Novell directly. I saw nowhere else to file the bug. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 551014] New: one click install: error ccoured while initializing the software repository
by bugzilla_noreply＠novell.com 27 Apr '16

27 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=551014 Summary: one click install: error ccoured while initializing the software repository Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: Other OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: suse-beta(a)cboltz.de QAContact: jsrain(a)novell.com Found By: Beta-Customer Created an attachment (id=324701) --> (http://bugzilla.novell.com/attachment.cgi?id=324701) y2logs (11.2 repo from today, probably near RC2) I tried to install YaBSC from the openSUSE:Tools repo using one click install. After entering the root password, YaST showed an error dialog: An error ccoured while initializing the software repository. Details: Try again? [Ja] [Nein] (= Yes / No) Yes, the line after "Details:" was really empty. Therefore this bug has two parts: - the missing information about details in the error dialog - maybe the failure itsself is also a bug The last lines from y2log when the error dialog was open: 2009-10-29 15:48:16 <1> geeko(26435) [zypp] RepoManager.cc(init_knownRepositories):557 end construct known repos 2009-10-29 15:48:16 <3> geeko(26435) [Pkg] Source_Create.cc(RepositoryAdd):449 alias openSUSE:Tools already exists [That's probably the disabled 11.1 version of the openSUSE:tools repo] 2009-10-29 15:48:16 <1> geeko(26435) [Pkg] OneClickInstallWorkerFunctions.ycp:113 Pkg Builtin called: SourceRefreshNow 2009-10-29 15:48:16 <3> geeko(26435) [Interpreter] OneClickInstallWorkerFunctions.ycp:113 Parameter 1 is nil, Integer is required 2009-10-29 15:48:16 <1> geeko(26435) [Pkg] OneClickInstallWorkerFunctions.ycp:116 Pkg Builtin called: LastError 2009-10-29 15:48:16 <1> geeko(26435) [ui] YPushButton.cc(setFunctionKey):183 Guessing button role YOKButton for YPushButton "Ja" at 0x18fb1b8 from function key F10 2009-10-29 15:48:16 <1> geeko(26435) [ui] YPushButton.cc(setFunctionKey):183 Guessing button role YCancelButton for YPushButton "Nein" at 0x198aac 8 from function key F9 The full y2logs are attached. Search for [cb] in y2log - I have marked when the error dialog popped up. BTW: After answering the dialog with yes (= try again) and confirming the repo details, the installation worked. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 630434] New: Server refuses to boot, while used iSCSI based non "/" file system is not available.
by bugzilla_noreply＠novell.com 27 Apr '16

27 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=630434 http://bugzilla.novell.com/show_bug.cgi?id=630434#c0 Summary: Server refuses to boot, while used iSCSI based non "/" file system is not available. Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: SLES 11 Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: DOlsson(a)WEB.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.6) Gecko/20100626 SUSE/3.6.6-1.1 Firefox/3.6.6 On our SLES 11 GM based "mirror" server (running as a virtual XEN guest), we are using iSCSI to attach to our NAS holding the "/data" file system, whereas all other file systems (/, /boot, /var, /home) are placed on local disk. When rebooting the server, it refuses to boot correctly, while it is not able to "fsck" the "/data" file system -- The system stops in "(repair filesystem) #" mode (after having entered the "root" password). Using the "nofail" option for the "/data" file system helps to get the system to reboot correctly, but in this case the "/data" file system is neither being checked nor mounted during the system startup, which therefore -- once again -- makes the system unusable! Using the "nofail" option is part of the "solution" listed in the SLES 11 SP1 documentation, but since the system is unusable, this is *not* the solution to the problem. The problem is that the "mkinitrd" is and the boot scripts are not capable of handling iSCSI attached file systems correctly. The correct way of handling iSCSI attached devices are: - All iSCSI devices having the "onboot" set as node startup setting must be attached during the "initrd" boot sequence (i.e. by "boot.open-iscsi") -- and this *independent* of whether the "/" (root) file system is attached via iSCSI or not, - All iSCSI devices having the "automatic" set as node startup setting need to be attached during the normal booting sequence (i.e. by "open-iscsi"), - All iSCSI devices having the "manual" set as node startup setting should be left alone. Using such a attaching schema will ensure that a server is capable of being booted with all its iSCSI file systems being attached, checked and mounted. Reproducible: Always Steps to Reproduce: 1a. Setup an iSCSI device and mount it e.g. as "/home" (no changes to "/etc/fstab"). 2a. Reboot the system 3a. System fails to boot, while "/home" is not available. 1b. Setup an iSCSI device and mount it e.g. as "/home", and add the "nofail" option in "/etc/fstab" to the "/home" mount point. 2b. Reboot system. 3b. System boots, but "/home" is neither checked nor mounted! Actual Results: When using iSCSI devices for non root file systems - the system is not able to boot, when the file system on the iSCSI device is listed in "/etc/fstab" as a file system that should be mounted or - the system boots boots, when the file system on the iSCSI device has been marked with "nofail" in "/etc/fstab", but the file is neither being checked nor it is being mounted. Expected Results: System boots with all file systems listed in "/etc/fstab" being checked and mounted independently of whether they are on local or iSCSI attached disks. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 91

[Bug 549849] New: Eclipse doesn't accept mouse clicks on buttons
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=549849 Summary: Eclipse doesn't accept mouse clicks on buttons Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Major Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: davor.cengija(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-3.2 Firefox/3.5.3 As described on Beta and Pre-release forum, http://forums.opensuse.org/pre-release-beta/424021-eclipse-doesnt-accept-mo… I just downloaded the newest Eclipse, just to be sure, but I had the same problem with some older version. Start Eclipse, and for example try to create a new project. Enter the project's name and click Next. The button recognizes that it's being clicked (e.g. gets focus, changes color etc) but nothing happens. Pressing enter works (as the button has focus now). The same thing happens on the next screen with the Finish button. Reproducible: Always Steps to Reproduce: 1. Start Eclipse 2. Click File>New>Java Project 3. Enter project's name, click Next - nothing happens 4. Press Enter button - wizard advances to next step, as expected It seems that this problems is easiliy reproducible, and is related to https://bugs.eclipse.org/bugs/show_bug.cgi?id=288909 However, it is quite serios, almost a showstopper for a number of users. If you need additional details, don't hesitate to ask, I'm more than willing to assist here. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 635920] New: hdparm v9.28 does not work with OCZ Vertex 2E SSD
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=635920 https://bugzilla.novell.com/show_bug.cgi?id=635920#c0 Summary: hdparm v9.28 does not work with OCZ Vertex 2E SSD Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Greg.Freemyer(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 Please upgrade oS 11.2 and 11.3 to hdparm v9.30 available on sourceforge. == background for request This bug relates to the hdparm --trim-sector-ranges-stdin capability which is invoked by the wiper.sh script which is also part of the hdparm package. Support for wiper.sh and hdparm --trim-sector-ranges-stdin is included in both openSUSE 11.2 and 11.3. Thomas Hertweck <Thomas.Hertweck at web.de> reported: > I have now installed openSUSE 11.3 on a OCZ Vertex 2E SSD. I used a > standard ext4 filesystem, the mount options at the moment are > "rw,noatime,acl,user_xattr". Unfortunately, wiper.sh doesn't work at all. > > No joy, obviously. I have asked Mark Lord (the hdparm maintainer) for feedback. He said the default max TRIM payload sent via hdparm has been lowered in the latest release of hdparm v2.30 and recommended we upgrade and see if it fixes the problem Reproducible: Always Steps to Reproduce: 1. Run wiper.sh against a Ext4 FS on a OCZ Vertex 2E SSD 2. 3. Actual Results: > $> wiper.sh --verbose --commit /dev/sdb1 > wiper.sh: Linux SATA SSD TRIM utility, version 2.6, by Mark Lord. > wiper.sh: This tool is DANGEROUS! Please read and understand > wiper.sh: /usr/share/doc/packages/hdparm/README.wiper > wiper.sh: before going any further. > rootdev=/dev/sdb1 > fsmode2: fsmode=read-write > /: fstype=ext4 > freesize = 45338732 KB, reserved = 453387 KB > Preparing for online TRIM of free space on /dev/sdb1 (ext4 mounted > read-write at /). > This operation could silently destroy your data. Are you sure (y/N)? y > Creating temporary file (44885345 KB).. > Syncing disks.. > Beginning TRIM operations.. > get_trimlist=/sbin/hdparm --fibmap WIPER_TMPFILE.13467 > /dev/sdb: > trimming 89770696 sectors from 1493 ranges > FAILED: Input/output error > Removing temporary file.. > Syncing disks.. > Aborted. Expected Results: All EXT4 unallocated space on the SSD should be "trimmed" such that the SSD can erase the unallocated sectors in advance of their being used, thus improving performance of the SSD. Note: There is a wiki entry that covers discard (trim) in openSUSE: http://en.opensuse.org/SDB:SSD_discard_%28trim%29_support Thread that originated the bug is available at: http://lists.opensuse.org/opensuse-kernel/2010-08/msg00068.html -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18

[Bug 635830] New: AppArmor: ag_subdomain broken: Can't locate Immunix/Notify.pm
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=635830 https://bugzilla.novell.com/show_bug.cgi?id=635830#c0 Summary: AppArmor: ag_subdomain broken: Can't locate Immunix/Notify.pm Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: juhliarik(a)novell.com ReportedBy: mvidner(a)novell.com QAContact: jsrain(a)novell.com CC: kmachalkova(a)novell.com Found By: --- Blocker: --- $ /usr/lib/YaST2/servers_non_y2/ag_subdomain Can't locate Immunix/Notify.pm in @INC (@INC contains: [...]) at /usr/lib/YaST2/servers_non_y2/ag_subdomain line 23 yast2-apparmor contains the file as /usr/lib/perl5/vendor_perl/Immunix/Notify.pm but that path is not searched by Perl. It needs to be in vendor_perl/$VERSION/Immunix instead. I am not sure where exactly this hits the user, but surely at some point y2-apparmor calls the agent. Originally reported by ezekiellg at http://forums.opensuse.org/english/get-help-here/applications/445307-yast-p… -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 635762] New: webalizer didn't support "GeoIP"
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=635762 https://bugzilla.novell.com/show_bug.cgi?id=635762#c0 Summary: webalizer didn't support "GeoIP" Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: st-schaefer(a)fsproductions.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.3 Firefox/3.6.8 If we use webalizer with configuration Options: GeoIP yes GeoIPDatabase /var/lib/GeoIP/GeoIP.dat we get this error output: Warning: Invalid keyword 'GeoIP' (webalizer.conf) Warning: Invalid keyword 'GeoIPDatabase' (webalizer.conf) We found the following solution for this behavior: "In earlier versions of this patch, there was a configure-parameter "--enable-geoip" to explicitly enable the geoip-extension. If you use this parameter with patch-20070115, it acts like "--disable-geoip"! Beware of using the --enablie-geoip option if you want to enable GeoIP. This took me some time to locate this error..." This happens with webalizer Versions newer 2.0. Stefan Reproducible: Always Steps to Reproduce: 1.see details 2. 3. Actual Results: see Details -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

← Newer
1
2
3
4
5
6
7
...
459
Older →

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openSUSE Bugs August 2010