March 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 560371] New: Partitionable MD Devices are not fully handled in udev
by bugzilla_noreply＠novell.com 11 Mar '10

11 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=560371 http://bugzilla.novell.com/show_bug.cgi?id=560371#c0 Summary: Partitionable MD Devices are not fully handled in udev Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86 OS/Version: SLES 11 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: maciej.patelczyk(a)intel.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5 (.NET CLR 3.5.30729) Partitionable MD Devices are not fully handled in udev. The partitions on RAID are not correctly recognized thus no /dev/disk* links are created. For instance: Partition will be /dev/md126p1. It cannot be examined by mdadm. Instead /dev/md126 should be examined to get UUID. /dev/md126 is parent device to /dev/md126p1. So on devicetype=partition mdadm sould examin parent device and use parent's UUID to generate links. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 557963] New: chromium cannot resolve any hosts
by bugzilla_noreply＠novell.com 11 Mar '10

11 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=557963 http://bugzilla.novell.com/show_bug.cgi?id=557963#c0 Summary: chromium cannot resolve any hosts Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: i686 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: prusnak(a)novell.com ReportedBy: nix(a)opensuse.org QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- When trying to access ANY website using chromium I get the following error: This webpage is not available. The webpage at http://slashdot.org/ might be temporarily down or it may have moved permanently to a new web address. Here are some suggestions: Reload this web page later. More information on this error Below is the original error message Error 105 (net::ERR_NAME_NOT_RESOLVED): The server could not be found. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 25

[Bug 584943] New: bash-completion: mount completion will say "bash: [: too many arguments"
by bugzilla_noreply＠novell.com 11 Mar '10

11 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=584943 http://bugzilla.novell.com/show_bug.cgi?id=584943#c0 Summary: bash-completion: mount completion will say "bash: [: too many arguments" Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: i686 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ngao(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=346201) --> (http://bugzilla.novell.com/attachment.cgi?id=346201) patch for mount completion I'm using bash-completion-1.1-1.1 from obs://build.opensuse.org/openSUSE:11.2:Contrib, here is command example: # mount -o loop /home/neville/test\ test/archlinux-2009.08-core-i686.iso /mnt-bash: [: too many arguments and attachment is a proposal patch, thanks. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 568048] New: dmsetup info/dm_task_get_name returns invalid entry
by bugzilla_noreply＠novell.com 11 Mar '10

11 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=568048 http://bugzilla.novell.com/show_bug.cgi?id=568048#c0 Summary: dmsetup info/dm_task_get_name returns invalid entry Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: xwhu(a)novell.com ReportedBy: puzel(a)novell.com QAContact: qa(a)suse.de Found By: Development Blocker: --- dmsetup info -c -j $major -m $minor returns info about device even when the device with $major/$minor is not a dm-device. I've created dm-crypt target with cryptosetup and a loop device: foxbat:~ # ls -l /dev/mapper/* crw-rw---- 1 root root 10, 60 10. pro 14.18 /dev/mapper/control brw-r----- 1 root disk 253, 0 31. pro 12.35 /dev/mapper/test foxbat:~ # ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 30. pro 15.25 /dev/loop0 brw-rw---- 1 root disk 7, 1 10. pro 14.18 /dev/loop1 brw-rw---- 1 root disk 7, 2 10. pro 14.18 /dev/loop2 brw-rw---- 1 root disk 7, 3 10. pro 14.18 /dev/loop3 brw-rw---- 1 root disk 7, 4 10. pro 14.18 /dev/loop4 brw-rw---- 1 root disk 7, 5 10. pro 14.18 /dev/loop5 brw-rw---- 1 root disk 7, 6 10. pro 14.18 /dev/loop6 brw-rw---- 1 root disk 7, 7 10. pro 14.18 /dev/loop7 foxbat:~ # losetup -a /dev/loop0: [0803]:392301 (/tmp/loopfile) foxbat:~ # dmsetup info Name: test State: ACTIVE Read Ahead: 256 Tables present: LIVE Open count: 0 Event number: 0 Major, minor: 253, 0 Number of targets: 1 Then, running dmsetup info with minor and major numbers belonging to the loop device gives information about the _dm_ device, but it should IMHO output nothing: foxbat:~ # dmsetup info -c -j 7 -m 0 Name Maj Min Stat Open Targ Event UUID test 253 0 L--w 0 1 0 This did _not_ happen in 11.1. Moreover, it is not related only to dmsetup tool, but something is wrong with libdevmapper (see bug #552596). -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 481207] kbdsniffd start script typo
by bugzilla_noreply＠novell.com 11 Mar '10

11 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=481207 http://bugzilla.novell.com/show_bug.cgi?id=481207#c2 yang xiaoyu <xyyang(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |xyyang(a)novell.com AssignedTo|bnc-team-screening(a)forge.pr |coolo(a)novell.com |ovo.novell.com | --- Comment #2 from yang xiaoyu <xyyang(a)novell.com> 2010-03-11 02:57:52 UTC --- coolo,please help me assign to the right person.Thx. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 586830] New: browsers do not use secondary dns when primary returns error
by bugzilla_noreply＠novell.com 11 Mar '10

11 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=586830 http://bugzilla.novell.com/show_bug.cgi?id=586830#c0 Summary: browsers do not use secondary dns when primary returns error Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: benderamp(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.4; Linux) KHTML/4.4.1 (like Gecko) SUSE Web browsers (at least firefox and konqueror) do not use secondary dns when primary returns error. Reproducible: Always Steps to Reproduce: 1. Make sure your current network+DNS works 2. Edit /etc/resolv.conf as root and add new bad DNS server above the working existing - for example one might probably take the one from my old provider (195.98.32.193) which supposingly does not accept requests from external ip addresses and returns "status: REFUSED" when test with "dig" command 3. try ping some site (like google.com or yandex.ru) - should work ok. 4. try opening same site in web browser (firefox or konqueror) - both would show error window immediately. Expected Results: As soon as ping works fine for some site, web browser should work fine too - if primary DNS returns error code, they should try secondary DNS. If I put some non-existing ip address as primary DNS, the browser does not show error message, but thinks for some visible ammount of time and then shows the page. Also, for example, android phone works fine even if the 1st DNS it receives by DHCP is incorrect (would return error code) - so in my case (when router return faulty primary dns server and normal secondary DNS server) I hade notebook with opensuse with non-working browsers and working android phone in same LAN. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 549543] New: f-spot is crashy
by bugzilla_noreply＠novell.com 11 Mar '10

11 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=549543 Summary: f-spot is crashy Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: ke(a)novell.com QAContact: qa(a)suse.de Found By: Documentation Yesterday I updated my M8 installation to the Factory state using "zypper dup". While documenting f-spot, it crashed at least 3 ×. While importing photos from a SD card (5 folders with approx. 100 photos, avr. size 3 MB), while playing with tags, and now while closing a "Type-to-find Search" by clicking on the cross on the right. The last crash is reproducible. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 561590] New: kpilotDaemon cannot connect to Palm T|X on /dev/ttyUSB1
by bugzilla_noreply＠novell.com 11 Mar '10

11 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=561590 http://bugzilla.novell.com/show_bug.cgi?id=561590#c0 Summary: kpilotDaemon cannot connect to Palm T|X on /dev/ttyUSB1 Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: Joachim.Reichelt(a)helmholtz-hzi.de QAContact: qa(a)suse.de Found By: Beta-Customer Blocker: --- I just upgraded from 11.1 to 11.2 on x86_64. I'm in the group dialout, can read and write to /dev/ttyUSB[01] from inside the console. Started kpilot, entered setup information as in http://docs.kde.org/stable/de/kdepim/kpilot/configure.html It does not matter, wether I start kpilot first of push the button on the palm. I allways get: # kpilot Object::connect: No such signal KListWidget::dropEvent( QDropEvent* ) Object::connect: (sender name: 'fIconView') Object::connect: (receiver name: 'FileInstallWidget') ! KPilot error: "PDA (Erfolg) wird nicht akzeptiert" ! ! KPilot error: "Der PDA-Socket (Eingabe-/Ausgabefehler) kann nicht zum Mithören geöffnet werden" ! ! KPilot error: "Der PDA-Port kann nicht geöffnet werden: [/dev/ttyUSB1]" ! ! KPilot error: "Der PDA-Port kann nicht geöffnet werden: [/dev/ttyUSB1]" ! ! KPilot error: "Der PDA-Port kann nicht geöffnet werden: [/dev/ttyUSB1]" ! ! KPilot error: "Der PDA-Port kann nicht geöffnet werden: [/dev/ttyUSB1]" -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 561559] New: Formatted Name in Kontact is shown empty when I import vcf files ..
by bugzilla_noreply＠novell.com 11 Mar '10

11 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=561559 http://bugzilla.novell.com/show_bug.cgi?id=561559#c0 Summary: Formatted Name in Kontact is shown empty when I import vcf files .. Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: i586 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: fahad.alsaidi(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=331514) --> (http://bugzilla.novell.com/attachment.cgi?id=331514) test vcf file User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-1.1.2 Firefox/3.5.5 I have problem in Kontact when I import my vcf files in it, Formatted Name is shown empty but when I edit the contact and just cut & past the name, the Formatted Name is displayed correctly. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 563997] New: no webcam functionality in opensuse 11.2
by bugzilla_noreply＠novell.com 10 Mar '10

10 Mar '10

http://bugzilla.novell.com/show_bug.cgi?id=563997 http://bugzilla.novell.com/show_bug.cgi?id=563997#c0 Summary: no webcam functionality in opensuse 11.2 Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: fenriswoolf(a)gmx.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-1.1.2 Firefox/3.5.5 there are already some posts out there, but it seems to be a systemic problem. i though my internal webcam (gateway usb 2.0 webcam on /dev/video0) was the problem, but now i read that logitechs have got simmilar issues. dmesg: [ 8.064123] Linux video capture interface: v2.00 [ 8.068361] uvcvideo: Found UVC 1.00 device Gateway USB 2.0 Webcam (04f2:b027) lsusb: Bus 001 Device 002: ID 04f2:b027 Chicony Electronics Co., Ltd Gateway USB 2.0 Webcam i have got nothing in luvcview, cheese, kopete, or skype ... i spent hours in the internet to fix this, but whatever i did, didn't help ... has anyone got a solution yet ... thanks all, theo __________________ gateway t1616 laptop -- amd turion64x2 processor -- ati radeon x1200 graphics -- realtek eth0/wlan0 cards opensuse 11.2 -- Linux 2.6.31.5-0.1-default x86_64 -- 4.3.1 (KDE 4.3.1) "release 6" Reproducible: Always Steps to Reproduce: 1.launch luvcview -- luvcview version 0.2.1 Video driver: x11 A window manager is available video /dev/video0 Unable to set format: 22. Init v4L2 failed !! exit fatal 2.launch cheese -- no picture 3.lauch skype / kopete -- go to option -- select video -- no pictures Actual Results: see steps to reproduce Expected Results: integrated webcam should start, picture should visible -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6