February 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 578406] New: /usr/share/lirc/remotes/devinput/lircd.conf.devinput not found
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=578406 http://bugzilla.novell.com/show_bug.cgi?id=578406#c0 Summary: /usr/share/lirc/remotes/devinput/lircd.conf.devinput not found Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 1 Platform: i686 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: zzocmertt(a)wanadoo.nl QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.7) Gecko/20091222 SUSE/3.5.7-1.1.1 Firefox/3.5.7 During installation of M1 on an P3 using network install iso, Yast2 shows popup: "/usr/share/lirc/remotes/devinput/lircd.conf is missing. Check your installation". The I pressed the OK button on the popup, and Yast2 continued. Reproducible: Always Steps to Reproduce: 1.Install M1 on P3 machine using network install 2.Accept all default choices 3.Install Expected Results: The pop occurrs Using XFCE as windowmanager, use whole single disk for installation. No lirc device was attachd to the machine, so it was not tested if Lirc worked properly -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 578404] New: ntop segfaults in libpcap at system shutdown
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=578404 http://bugzilla.novell.com/show_bug.cgi?id=578404#c0 Summary: ntop segfaults in libpcap at system shutdown Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Critical Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: m.munnix(a)redcross.be QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-GB; rv:1.9.1.7) Gecko/20091222 SUSE/3.5.7-1.1.1 Firefox/3.5.7 Feb 8 23:10:36 linux-bcpx ntpd[2636]: ntpd exiting on signal 15 Feb 8 23:10:36 linux-bcpx avahi-daemon[2545]: Got SIGTERM, quitting. Feb 8 23:10:36 linux-bcpx avahi-daemon[2545]: Leaving mDNS multicast group on interface eth1.IPv4 with address 10.222.222.31. Feb 8 23:10:36 linux-bcpx avahi-daemon[2545]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.1. Feb 8 23:10:37 linux-bcpx sshd[2709]: Received signal 15; terminating. Feb 8 23:10:38 linux-bcpx kernel: [ 6619.724057] device eth1 left promiscuous mode Feb 8 23:10:38 linux-bcpx kernel: [ 6619.732246] __ratelimit: 3 callbacks suppressed Feb 8 23:10:38 linux-bcpx kernel: [ 6619.732268] ntop[2649]: segfault at 0 ip 00007fbcdc41a965 sp 00007fbcd2517dd0 error 4 in libpcap.so.1.0.0[7fbcdc413000+33000] Feb 8 23:10:38 linux-bcpx rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w" Feb 8 23:10:39 linux-bcpx kernel: Kernel logging (proc) stopped. Reproducible: Always Steps to Reproduce: 1. 2. 3. packages: ntop-3.3.10-2.7.x86_64 libpcap1-1.0.0-5.2.x86_64 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 577803] New: Xsane help documention is not where program itself expects
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=577803 http://bugzilla.novell.com/show_bug.cgi?id=577803#c0 Summary: Xsane help documention is not where program itself expects Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: i586 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Documentation AssignedTo: ke(a)novell.com ReportedBy: mlj(a)chase.eclipse.co.uk QAContact: ke(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:1.9.1.7) Gecko/20091222 SUSE/3.5.7-1.1.1 Firefox/3.5.7 Xsane as compiled - i can't find a config file for this if it exists- expects its documentation for some reason to be at file:///usr/share/doc/packages/xsane/ Its actually at file:///usr/share/sane/xsane/doc/ Reproducible: Always Steps to Reproduce: 1.Click on help option XSane doc or press F1 2. 3. Actual Results: error message - File does not exist Expected Results: html help docyument displayed. Obviously I solved issue by copying files to where they are pointed to Interestingly the XSane documentation refers to correct place for file but I am not sure if this is a vendor or SUSE compilation problem. Found it when trying to work out why XSane not detecting my printers -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 577791] New: Reduce package list for minimal install
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=577791 http://bugzilla.novell.com/show_bug.cgi?id=577791#c0 Summary: Reduce package list for minimal install Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: All OS/Version: Linux Status: NEW Severity: Enhancement Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jengelh(a)medozas.de QAContact: jsrain(a)novell.com Found By: Beta-Customer Blocker: --- Created an attachment (id=341168) --> (http://bugzilla.novell.com/attachment.cgi?id=341168) list of removed or added packages The minimal text-mode only server install option in the openSUSE 11.2 installer stuffs about 800 packages onto disk when 400 would do. This bugzilla item will be used to store required larger files. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 22

[Bug 577489] New: Dmesg reports error immediately after startup
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c0 Summary: Dmesg reports error immediately after startup Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 1 Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: upscope(a)nwi.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.4 (like Gecko) SUSE getting this error found in display message (Dmesg) right after booting 11.3 ms1. [ 12.211890] hald-probe-inpu[1539]: segfault at 2 ip 00007fb6b5b1f0d9 sp 00007fff609ca3c0 error 4 in libc-2.11.so[7fb6b5aa7000+151000] [ 12.221551] hald-probe-inpu[1540]: segfault at 2 ip 00007fe5a9c0f0d9 sp 00007ffff0bf2900 error 4 in libc-2.11.so[7fe5a9b97000+151000] [ 12.226451] hald-probe-inpu[1541]: segfault at 2 ip 00007fafa631c0d9 sp 00007fff47a54af0 error 4 in libc-2.11.so[7fafa62a4000+151000] [ 12.229858] hald-probe-inpu[1543]: segfault at 2 ip 00007f9447f610d9 sp 00007fff9b9f89d0 error 4 in libc-2.11.so[7f9447ee9000+151000] [ 12.230608] hald-probe-inpu[1544]: segfault at 2 ip 00007fbf0d9170d9 sp 00007fffce03fa80 error 4 in libc-2.11.so[7fbf0d89f000+151000] [ 12.231463] hald-probe-inpu[1545]: segfault at 2 ip 00007ffdb8e470d9 sp 00007fffde5fa000 error 4 in libc-2.11.so[7ffdb8dcf000+151000] Appears this package is provided by glibc. got following response on newsgroup from Knurpht: Looks like a bug, so yes. Am i stupid or should it say hald-probe-input instead of hald-probe-inpu The latest seems so irrational. Reproducible: Always Steps to Reproduce: 1. boot system 2. log in as user 3. start console and do dmesg command 4. Error towards end of log Actual Results: See details above. Should it be input or inpu. Expected Results: Not sure Intel dx48bt2 motherboard, Intel E7200 Core 2 duo 2.53 Mhz, 4GB DDR3, 2 320 GB SATA drives (sda is 11.2 install and sdb is 11.3), on board sound (Intel), and GeForce 8400GS graphics. usb hard drives (1TB My Book and 230 GB Ide) and two Lite-on DVD/cdrom drives. System comes up but there is some problem with user accessing the usb hard drives and dvds (root can access fine) This is seperate issue I think? Please contact me for anything else you need (not sure how to classify this?) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 24

[Bug 576681] New: Installation hangs at Loading basic drivers
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=576681 http://bugzilla.novell.com/show_bug.cgi?id=576681#c0 Summary: Installation hangs at Loading basic drivers Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 1 Platform: i586 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ingesvensson(a)orion.vokby.se QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; sv-SE; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729) At installation under VirtualBox the processor goes up to 100% CPU and installation halts at Loading basic drivers. Reproducible: Always Steps to Reproduce: 1.Boot from DVD 2.Choose installation 3.Press Esc after Kernel is loaded. Actual Results: Installation halts Expected Results: Installation should have continued -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 82

[Bug 576533] New: OProfile misses some agents
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=576533 http://bugzilla.novell.com/show_bug.cgi?id=576533#c0 Summary: OProfile misses some agents Classification: openSUSE Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: christ.juergen(a)t-online.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.7) Gecko/20091222 SUSE/3.5.7-1.1.1 Firefox/3.5.7 OpenSuSE 11.3 version of oprofile does not include agent libraries like jvmpi_oprofile.so and jvmti_oprofile.so. Looks like they are missing on the build. Regards, Juergen Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 575544] New: cups-1.4 installs 32 bit libraries on 64 bit platform and breaks printing
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=575544 http://bugzilla.novell.com/show_bug.cgi?id=575544#c0 Summary: cups-1.4 installs 32 bit libraries on 64 bit platform and breaks printing Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: rodneyp(a)pcug.org.au QAContact: jsmeix(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.5 (like Gecko) SUSE package cups-1.4.2-38.1 in repository http://download.opensuse.org/repositories/Printing/openSUSE_11.2 apparently contains a payload which installs to (32 bit) /usr/lib. This breaks printing on a system originally installed with x86_64 architecture. initially I installed via "ymp" but also manually downloaded the cups-1.4.2-38.1-x86_64 package and used rpm --force to reinstall. Same outcome error message from cups, whether for existing or newly installed printers is: "Filter "/usr/lib/cups/filter/foomatic-rip" for printer "bjc4310SP" not available: No such file or directory" similarly for printers using other filters making links from /usr/bin & /usr/lib/cups/filters to /usr/lib64/cups/filers gets rid of the error messages. I did not uninstall cups 1.3 prior to installing cups 1.4. Investigated it, but it would have required dozens of other packages uninstalled, to comply with dependencies, then reinstalled. Reproducible: Always Steps to Reproduce: 1.install cups-libs, cups-client, cups all version 1.4.2-38.1. 2. 3. Actual Results: components in /usr/lib/cups are updated to files having date 28 jan 10 components in /usr/lib64/cups are not printers do actually work, after links are made manually, to the filters which cups expects. This is an improvement because I could not get any printers relying on foomatic-rip to work from openSUSE 11.2 with cups 1.3. Expected Results: components in /usr/lib64/cups are updated to files having date 28 jan 10 components in /usr/lib64/cups might not be updated or if it was intended that links between the lib & lib64 directories be used then those links be in the package. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 39

[Bug 574943] New: obs://build.opensuse.org/home:plater/rosegarden4 svn 11719 sigsegv in instrument parameter box
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=574943 http://bugzilla.novell.com/show_bug.cgi?id=574943#c0 Summary: obs://build.opensuse.org/home:plater/rosegarden4 svn 11719 sigsegv in instrument parameter box Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: davejplater(a)gmail.com ReportedBy: m.munnix(a)redcross.be QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- Created an attachment (id=339513) --> (http://bugzilla.novell.com/attachment.cgi?id=339513) screenshot I have added a synth (hexter), opened the editor (ok), closed it assigned the synth to a track. then I clicked on editor button in instrument parameter box and got a segfault -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 574864] New:=?UTF-8?Q?=20The=20module=20YaST=20isn=C2=B4t=20a=20valid=20configuration=20module?=
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=574864 http://bugzilla.novell.com/show_bug.cgi?id=574864#c0 Summary: The module YaST isn´t a valid configuration module Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 1 Platform: All OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: rastislav.krupansky(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- Created an attachment (id=339471) --> (http://bugzilla.novell.com/attachment.cgi?id=339471) screenshot User-Agent: Opera/9.80 (Windows NT 5.1; U; sk) Presto/2.2.15 Version/10.10 Unable to open YaST from KDE´s system settings. When i click on YaST icon in system settings, i obtain: The module YaST isn´t a valid configuration module The diagnosis is: The desktop file YaST-systemsettings.desktop does not specify a library. Attached screenshot Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18