February 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 571494] kernel BUG exposed by samba and firefox
by bugzilla_noreply＠novell.com 08 Feb '10

08 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=571494 http://bugzilla.novell.com/show_bug.cgi?id=571494#c14 --- Comment #14 from Suresh Jayaraman <sjayaraman(a)novell.com> 2010-02-08 09:18:01 UTC --- (In reply to comment #13) > > Did you mean saving the file to local disk partition or to cifs mount? [...] > > > Both, actually. In one case it was copying a >3MB file to a CIFS volume. In > other cases it was saving a file to the local ext4 volume. Hmm, still it is not clear to me, the second case, saving a file to local ext4 from CIFS volume? and/or your applications running on CIFS volume? In case of saving to local volume, can you attach the oops? > Finally upgraded the secondary computer to v11.2. Unfortunately it does not > exhibit the reported issue. > > AFAIK the only differences between to two systems are: > - the /home volume uses reiserFS instead of ext4 > - it was an upgrade from v11.1 instead of a clean installation -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 577805] New: KDE4 systray icons overlap widgets
by bugzilla_noreply＠novell.com 08 Feb '10

08 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=577805 http://bugzilla.novell.com/show_bug.cgi?id=577805#c0 Summary: KDE4 systray icons overlap widgets Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: lavrinenko_alex(a)mail.ru QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=341173) --> (http://bugzilla.novell.com/attachment.cgi?id=341173) KDE4 systray icons bug User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3) KHTML/4.3.98 (like Gecko) SUSE KDE's systray icons got rendered on widgets located to the right from systray (in my case - battery and clock) when "show hidden icons" is pressed and systray opens fully. Check screenshot attached, note the clock. Reproducible: Always Steps to Reproduce: 1. start KDE4 session 2. press "show hidden icons" button in systray -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 551664] New: openSUSE 11.2 rc2 fails to boot in para virtualized Xen VM on openSUSE 11.1
by bugzilla_noreply＠novell.com 08 Feb '10

08 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=551664 User jahudson(a)novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=551664#c1 Summary: openSUSE 11.2 rc2 fails to boot in para virtualized Xen VM on openSUSE 11.1 Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Xen AssignedTo: jdouglas(a)novell.com ReportedBy: jahudson(a)novell.com QAContact: qa(a)suse.de Found By: Beta-Customer openSuSE 11.1 system is fully up to date. I'm using the openSUSE-DVd-Build0339-x86_64.iso image. vm-install fails saying it couldnt find the kernel. If I attach a console to it, I see that the openSUSE 11.2 RC2 kernel crashes shortly after it starts. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.5-0.1-xen (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2009-10-26 15:49:03 +0100 [ 0.000000] Command line: install=hd:/dev/xvdb console=tty1 console=ttyS0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Xen-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000018800000 (usable) [ 0.000000] last_pfn = 0x18800 max_arch_pfn = 0x80000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000018800000 [ 0.000000] RAMDISK: 008de000 - 04d9d000 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /usr/src/packages/BUILD/kernel-xen-2.6.31.5/linux-2.6.31/drivers/firmware/dmi_scan.c:427 dmi_matches+0xbc/0xd0() [ 0.000000] dmi check: not initialized yet. [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.31.5-0.1-xen #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff800119b9>] try_stack_unwind+0x189/0x1b0 [ 0.000000] [<ffffffff8000f466>] dump_trace+0xa6/0x1e0 [ 0.000000] [<ffffffff800114c4>] show_trace_log_lvl+0x64/0x90 [ 0.000000] [<ffffffff80011513>] show_trace+0x23/0x40 [ 0.000000] [<ffffffff8046af06>] dump_stack+0x81/0x9e [ 0.000000] [<ffffffff8004f4c0>] warn_slowpath_common+0x80/0xd0 [ 0.000000] [<ffffffff8004f59b>] warn_slowpath_fmt+0x4b/0x70 [ 0.000000] [<ffffffff803a578c>] dmi_matches+0xbc/0xd0 [ 0.000000] [<ffffffff803a5848>] dmi_check_system+0x38/0x90 [ 0.000000] [<ffffffff807978a1>] io_delay_init+0x2c/0x42 [ 0.000000] [<ffffffff80794969>] setup_arch+0x31d/0xaf1 [ 0.000000] [<ffffffff807919db>] start_kernel+0xcf/0x38a [ 0.000000] [<ffffffff80790d94>] x86_64_start_reservations+0xf4/0x10f [ 0.000000] [<ffffffff80790dfa>] x86_64_start_kernel+0x4b/0x66 [ 0.000000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /usr/src/packages/BUILD/kernel-xen-2.6.31.5/linux-2.6.31/drivers/firmware/dmi_scan.c:427 dmi_matches+0xbc/0xd0() [ 0.000000] dmi check: not initialized yet. [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 2.6.31.5-0.1-xen #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff800119b9>] try_stack_unwind+0x189/0x1b0 [ 0.000000] [<ffffffff8000f466>] dump_trace+0xa6/0x1e0 [ 0.000000] [<ffffffff800114c4>] show_trace_log_lvl+0x64/0x90 [ 0.000000] [<ffffffff80011513>] show_trace+0x23/0x40 [ 0.000000] [<ffffffff8046af06>] dump_stack+0x81/0x9e [ 0.000000] [<ffffffff8004f4c0>] warn_slowpath_common+0x80/0xd0 [ 0.000000] [<ffffffff8004f59b>] warn_slowpath_fmt+0x4b/0x70 [ 0.000000] [<ffffffff803a578c>] dmi_matches+0xbc/0xd0 [ 0.000000] [<ffffffff803a5848>] dmi_check_system+0x38/0x90 [ 0.000000] [<ffffffff807978a1>] io_delay_init+0x2c/0x42 [ 0.000000] [<ffffffff80794969>] setup_arch+0x31d/0xaf1 [ 0.000000] [<ffffffff807919db>] start_kernel+0xcf/0x38a [ 0.000000] [<ffffffff80790d94>] x86_64_start_reservations+0xf4/0x10f [ 0.000000] [<ffffffff80790dfa>] x86_64_start_kernel+0x4b/0x66 [ 0.000000] ---[ end trace a7919e7f17c0a726 ]--- I'll attach the whole log next. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 32

[Bug 577782] New: When sending mail via smpt to smtp.mail.yahoo.co.uk - signal SIGBUS, Bus error
by bugzilla_noreply＠novell.com 07 Feb '10

07 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=577782 http://bugzilla.novell.com/show_bug.cgi?id=577782#c0 Summary: When sending mail via smpt to smtp.mail.yahoo.co.uk - signal SIGBUS, Bus error Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: davejplater(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- When sending a message to smtp.mail.yahoo.co.uk port 465 no secure authentication SSL/TLS I get :- Program received signal SIGBUS, Bus error. 0x00007fffd752c262 in pa_shm_cleanup () from /usr/lib64/libpulsecommon-0.9.19.so -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 564953] New: The dynamical (non-statical) Xserver configuration of a Tablet PC (HP Pavilion tx2532la) fails during the installation: the system aborts, black screen, unresponsive to Ctrl+Alt+Backspace and ACPI stimuli, and the same takes place when recurring to Sax2.
by bugzilla_noreply＠novell.com 07 Feb '10

07 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=564953 http://bugzilla.novell.com/show_bug.cgi?id=564953#c0 Summary: The dynamical (non-statical) Xserver configuration of a Tablet PC (HP Pavilion tx2532la) fails during the installation: the system aborts, black screen, unresponsive to Ctrl+Alt+Backspace and ACPI stimuli, and the same takes place when recurring to Sax2. Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Critical Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: publio.escipion.el.africano(a)gmail.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- Created an attachment (id=332784) --> (http://bugzilla.novell.com/attachment.cgi?id=332784) HP Pavilion tx2532la hardware information. User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; es-ES; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-1.1.2 Firefox/3.5.5 Before submit this issue I reviewed the bugs involving problems with video and TabletPCs, to avoid submit you something duplicated, and from https://bugzilla.novell.com/show_bug.cgi?id=539004 I realized you no longer rely on a static X configuration, although Xserver could read xorg.conf if available (https://bugzilla.novell.com/show_bug.cgi?id=539004#c12) and I am very sorry about sax2. However, I think that there are clear advantages in the way it seems to be now (I remember me configuring Debian 2.2, so I know how gentle SuSE, which I use since 7, and Linux in general, have become), but I am not aware of them, and I am unfamiliar with the new dynamical X configuration: I have just jumped from openSuSE 10.2. Suggest me further reading on the new mechanism. But, since http://en.opensuse.org/HCL/Laptops/HP#tx_XXXX_xx implies the using of sax2, there is good idea to keep it working as deserves so useful an historic tool, specially when the new dynamical X configuration fails. I understand the advantages of this new mechanism, but I couldn't taste it. I have Tablet PC, a new HP Pavilion tx2532la, which hardware info I'll attach, in which I setup painly openSuSE 11.2 because the booted system used to hung up when arrived to the setup devices stage during the second part of the installation. It was difficult for me realize that it was because Xorg doesn't configured the video output at all, because instead of falling into a terminal, the system hung up. I run several times the installation, with several kernel parameters, unsuccessfully. I run the firmware test and the BIOS built-in memory test, I verified the installed software, and followed the boot log, so I discarded any issue previous to the running of the X server. So, I loaded the rescue system, mounted my root partition on /mnt and ls /mnt/etc/X11 and... I didn't see a xorg.conf file but that of the install system (xorg.conf.install). Of course, then, last Sunday, December 13t, 2009, I had no idea of the new way the video setting up was functioning, if I had had I had been very confused concernig the abnormality. Thus I cp /mnt/etc/X11/xorg.conf.install /mnt/etc/X11/xorg.conf and init 6... and the system, instead of rebooting, hung up! It was not responsive to APCI stimuli. I took a hammer... After starting up the laptop, the install systems resumed and I got my login screen. As the tablet and the pen didn't work at all (I wasn't worry about that yet), as instructed http://en.opensuse.org/HCL/Laptops/HP#tx_XXXX_xx, I invoked sax2 and... the system hung up (yes, again). All those situations involving the Xserver missfunctioning were unresponsive to Ctrl+Alt+Backspace and ACPI stimuli. Aware of the absence of the Xor.conf file and its follows, after performing a new install one could do the following: stop "The Final Countdown" (Europe) and switch to consoles 2, 5, 6 or 9 and mount the root partition (mount -t ext 4 /dev/<device> /mnt) and cp /mnt/etc/X11/xorg.conf.install /mnt/etc/X11/xorg.conf, after that return to the install screen (F7), and accept then to reboot into the installed system without trouble and for the install program resumed and finished the installation. (In this second opportunity, the tablet and the pen were functional but somehow crazy.) However, I still can not call sax2 for configuring my devices, add an external monitor (Acer Al1916W), and so on, because the system hangs up (I insist: black screen, unresponsive to Ctrl+Alt+Backspace and ACPI stimuli). And, concerning the issue https://bugzilla.novell.com/show_bug.cgi?id=547900, I always installed wacom-kmp-desktop et alii, because I never use the pattern view during the install, but select the packages to install through the RPM categories tree, or the search engine (I had not noticed that there was a TabletPC pattern till the reading of this link). Whether would you suggest me how to configure my devices (I had never configured a TabletPC before) editing the xorg.cong file meanwhile you hand over this issue, I'll be very thankful. I broke the hammer. Reproducible: Always Steps to Reproduce: 1.Install openSuSE 11.2 into a TabletPC (certaintly, into a HP Pavilion tx2532la) 2. 3. Actual Results: The system aborts, black screen, unresponsive to Ctrl+Alt+Backspace and ACPI stimuli. Expected Results: Well, as I stated before, I jumped from openSuSE 10.2, so I was waiting for the stage in which I was able to configure my monitor, because it run sax2, in which there is (still? I don't know whether are or are not changes in sax2) a section to configure the tablet and multiple monitors. Now, I realize that I had just had a fully functional -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 567881] New: Update package wt to version 3.1.0
by bugzilla_noreply＠novell.com 07 Feb '10

07 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=567881 http://bugzilla.novell.com/show_bug.cgi?id=567881#c0 Summary: Update package wt to version 3.1.0 Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: poletti.marco(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; it; rv:1.9.1.6) Gecko/20091201 SUSE/3.5.6-1.1.1 Firefox/3.5.6 GTB6 In the Factory repository there is wt 2.1.5. Wt 3.1.0 is out, so the package should be updated. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

Your Bugzilla bug list needs attention.
by bugzilla_noreply＠novell.com 07 Feb '10

07 Feb '10

[This e-mail has been automatically generated.] You have one or more bugs assigned to you in the Bugzilla bug tracking system (http://bugzilla.novell.com/) that require attention. All of these bugs are in the NEW orREOPENED state, and have not been touched in 7 days or more. You need to take a look at them, and decide on an initial action. Generally, this means one of three things: (1) You decide this bug is really quick to deal with (like, it's INVALID), and so you get rid of it immediately. (2) You decide the bug doesn't belong to you, and you reassign it to someone else. (Hint: if you don't know who to reassign it to, make sure that the Component field seems reasonable, and then use the "Reassign bug to default assignee of selected component" option.) (3) You decide the bug belongs to you, but you can't solve it this moment. Just use the "Accept bug" command. To get a list of all NEW/REOPENED bugs, you can use this URL (bookmark it if you like!): http://bugzilla.novell.com/buglist.cgi?bug_status=NEW&bug_status=REOPENED&a… Or, you can use the general query page, at http://bugzilla.novell.com/query.cgi Appended below are the individual URLs to get to all of your NEW bugs that haven't been touched for 7 days or more. You will get this message once a week until you've dealt with these bugs! xrdp missing in repositories -> http://bugzilla.novell.com/show_bug.cgi?id=555830 scim-bridge version 0.4.15-116.3 -> http://bugzilla.novell.com/show_bug.cgi?id=556094

1 0

[Bug 577779] New: uncaught exception - causes page errors
by bugzilla_noreply＠novell.com 07 Feb '10

07 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=577779 http://bugzilla.novell.com/show_bug.cgi?id=577779#c0 Summary: uncaught exception - causes page errors Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: Firefox AssignedTo: bnc-team-mozilla(a)forge.provo.novell.com ReportedBy: linxt(a)comcast.net QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=341163) --> (http://bugzilla.novell.com/attachment.cgi?id=341163) screen shots of Firefox errors and error console messages User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.0) Gecko/20100115 SUSE/3.6.0-1.1 Firefox/3.6 In Firefox 3.6 for openSUSE 11.3, on some sites the page displays a not-circle with an f in it. The error console reports: "uncaught exception: [Exception... "Component is not available" nsresult: "0x80040111 (NS_ERROR_NOT_AVAILABLE)" location: "jsframe::chrome://cbutton-1263255919/content/firefox/block.xml:: ::line 108" data: no]. This has occurred on several sites while other sites display correctly. I've tried turning java and java script off with no change. Pages displayed properly in Arora and Konqueror. See attached three (3) screen snapshots. Reproducible: Always Steps to Reproduce: 1.Open Firefox 2.Click open web site to view 3.Page displays with error symbol Actual Results: Some pages or portions of pages display error symbol Expected Results: Proper display of pages Dell Studio 1745 laptop with Intel Cantiga graphics controller (mobile GM45 chipset) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 384252] Firefox asks for master password for each tab
by bugzilla_noreply＠novell.com 07 Feb '10

07 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=384252 http://bugzilla.novell.com/show_bug.cgi?id=384252#c4 Joerg Reuter <jreuter(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Component|Firefox |Firefox Version|Beta 1 |Final Resolution|UPSTREAM | Product|openSUSE 11.0 |openSUSE 11.2 Target Milestone|--- |Factory OS/Version|openSUSE 11.0 |openSUSE 11.2 --- Comment #4 from Joerg Reuter <jreuter(a)novell.com> 2010-02-07 08:15:21 UTC --- Nope, not fixed there either, Firefox 3.6 (from mozilla/openSUSE_11.2 OBS repo) still asks for the password for each tab... -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 543250] New: Shorten desktop login sound
by bugzilla_noreply＠novell.com 06 Feb '10

06 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=543250 Summary: Shorten desktop login sound Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: noelamac(a)gmail.com QAContact: qa(a)suse.de Found By: --- I find the desktop login sound (canberra-gtk-play --id='desktop-login' --description='GNOME login') lasts too much for a session login. I mean, a shorter sound (short -> duration) should fit better for a session login as the current sound keeps playing in background even when the session is already running and it's a bit disturbing for the user. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2