openSUSE Bugs January 2010

bugs@lists.opensuse.org

3 participants
3985 discussions

[Bug 573246] New: mounted shares via mount.cifs disappear when dhclient renews lease
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=573246 http://bugzilla.novell.com/show_bug.cgi?id=573246#c0 Summary: mounted shares via mount.cifs disappear when dhclient renews lease Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Samba AssignedTo: samba-maintainers(a)SuSE.de ReportedBy: rmueller(a)thinxsolutions.com QAContact: samba-maintainers(a)SuSE.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.1.6) Gecko/20091201 SUSE/3.5.6-1.1.1 Firefox/3.5.6 An currently unused, cifs-mounted share of a samba server will be released when DHCP-Client renews its lease. If there is a file open, the share remains mounted. mount.cifs version: 1.12-3.4.2-1.1.3.1-2229-SUSE-SL11.2 Samba Version: seems to be independent, currently I have tested a 3.2.5 (Deb. Lenny) and an older 3.0.28 Workaround: Increase lease-time at DHCP-Server to a sufficient value Reproducible: Always Steps to Reproduce: 1.Set lease time at dhcpd to a short value, i.e. 300 2.restart network on client 3.mount a share via mount.cifs 3.wait a time greater than 300sec specified above and verify in /var/log/messages that the lease was renewed. 4: check if the cifs-share is still mounted, for me it's always not. Never had this problem with earlier opensuse-versions in the same environment Actual Results: mounted share has gone ;-) Expected Results: share should not disappear at client when lease is renewed -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 48

[Bug 573240] New: sed error message on postfix update
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=573240 http://bugzilla.novell.com/show_bug.cgi?id=573240#c0 Summary: sed error message on postfix update Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: varkoly(a)novell.com ReportedBy: suse-beta(a)cboltz.de QAContact: qa(a)suse.de Found By: Beta-Customer Blocker: --- While installing the postfix patch from 11.2 test updates, I got the following error messages: sed: -e expression #1, char 27: missing command Full context: # zypper in -t patch postfix .. Der folgende NEUE Patch wird installiert: postfix Das folgende Paket wird aktualisiert: postfix 1 Paket wird aktualisiert. Gesamtgröße des Downloads: 930,0 KiB. Kein zusätzlicher Speicherplatz wird nach dieser Operation belegt oder freigegeben. Fortfahren? [j/n/?] (j): Paket postfix-2.6.1-2.5.1.x86_64 wird abgerufen (1/1), 930,0 KiB (2,5 MiB entpackt) Abruf: postfix-2.6.1-2.5.1.x86_64.rpm [fertig (64,0 KiB/s)] Installation von: postfix-2.6.1-2.5.1 [fertig] ZusÃ€tzliche rpm-Ausgabe: warning: /etc/postfix/main.cf created as /etc/postfix/main.cf.rpmnew sed: -e expression #1, char 27: missing command Updating etc/sysconfig/postfix... Updating etc/sysconfig/mail... Es gibt einige aktive Prozessen, die Dateien verwenden, [...] -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 572938] New: Firefox 3.6 crashes during startup with Segmentation fault
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=572938 http://bugzilla.novell.com/show_bug.cgi?id=572938#c0 Summary: Firefox 3.6 crashes during startup with Segmentation fault Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Critical Priority: P5 - None Component: Firefox AssignedTo: bnc-team-mozilla(a)forge.provo.novell.com ReportedBy: A.Seifert(a)mus.cz QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 GTB6 (.NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.590; .NET CLR 3.0.4506.2152; .NET CLR 3.5.20706; .NET CLR 3.5.30729) After update to FF 3.6 from Mozilla repository FF crashes during startup. Tried without any profile (so a new profile was created) with result: gdb> Program received signal SIGSEGV, Segmentation fault. nsGenericElement::GetAttrInfo (this=<value optimized out>, aNamespaceID=0, aName= 0x7fffe576b9c8) at /usr/src/debug/mozilla/content/base/src/nsGenericElement.cpp:4458 4458 { some profile was created, so next start I've got different error: Program received signal SIGSEGV, Segmentation fault. 0x00007ffff55d3b7f in nsScriptSecurityManager::GetPrincipalAndFrame (this= 0x7ffff6d23100, cx=0x7fffe57c8000, frameResult=0x7fffff7ff058, rv=0x7fffff7ff56c) at /usr/src/debug/mozilla/caps/src/nsScriptSecurityManager.cpp:2281 2281 for (fp = JS_FrameIterator(cx, &fp); fp; fp = JS_FrameIterator(cx, &fp)) Reproducible: Always Steps to Reproduce: 1.Install a new version FF 3.6 from http://download.opensuse.org/repositories/mozilla/openSUSE_11.2/ 2. run the FF 3. Actual Results: FF crashes Expected Results: FF starts I suspect some library is wrong version, but dependencies seems to be OK. FF 3.6 downloaded as .bz archive from mozilla.org works without any problem. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 572673] New: [openSUSE:11.2/python] No ipv6 support
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=572673 http://bugzilla.novell.com/show_bug.cgi?id=572673#c0 Summary: [openSUSE:11.2/python] No ipv6 support Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: jmatejek(a)novell.com ReportedBy: florent.fievez(a)fievel.be QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- Python is not compiled with ipv6 support : Python 2.6.2 (r262:71600, Oct 24 2009, 03:15:21) [GCC 4.4.1 [gcc-4_4-branch revision 150839]] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import socket >>> socket.has_ipv6 False -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 572205] New: ifup-route eat 100% CPU when i use big routing table
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=572205 http://bugzilla.novell.com/show_bug.cgi?id=572205#c0 Summary: ifup-route eat 100% CPU when i use big routing table Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: All OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: adrian.ban(a)mantech.ro QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729) ifup-route take 100% CPU and a long time to finish when i try to shutdown/fireup an interfece and i'm using quagga with BGP using around 8000 routes or the worst case when i'm using full routing table. PPPoE1:/etc/sysconfig/network/scripts # /etc/init.d/network stop bond0.11 Shutting down network interfaces: bond0.11 name: VLAN 11 - Servers Interconnect top - 13:11:48 up 4 days, 12:49, 3 users, load average: 0.60, 0.14, 0.05 Tasks: 179 total, 2 running, 177 sleeping, 0 stopped, 0 zombie Cpu(s): 93.2%us, 1.9%sy, 0.0%ni, 0.0%id, 0.0%wa, 1.0%hi, 3.9%si, 0.0%st Mem: 500400k total, 493048k used, 7352k free, 135788k buffers Swap: 514040k total, 0k used, 514040k free, 218848k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 9932 root 20 0 9108 7472 1056 R 97.6 1.5 0:17.87 ifdown-route 9941 root 20 0 2564 1056 780 R 2.0 0.2 0:00.05 top 1 root 20 0 1940 656 572 S 0.0 0.1 0:01.27 init Reproducible: Always Steps to Reproduce: 1. configure quagga with a bgp session that install a big number of routes 2. fireup zebra + bgp 3. try to start/stop an interface Actual Results: CPU is 100% used by ifup-route and the network service take a long time to shutdown/fireup the interface. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 20

[Bug 571934] New: sqlite3 broken on powerpc
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=571934 http://bugzilla.novell.com/show_bug.cgi?id=571934#c0 Summary: sqlite3 broken on powerpc Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: PowerPC OS/Version: openSUSE 11.2 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: mls(a)novell.com ReportedBy: lchiquitto(a)novell.com QAContact: qa(a)suse.de CC: max(a)novell.com Found By: --- Blocker: --- Symptom: Epiphany segfaults on start up Crash happens here: Program received signal SIGSEGV, Segmentation fault. sqlite3MemSize (pPrior=0x230) at sqlite3.c:12669 12669 return (int)p[0]; References: http://www.mail-archive.com/sqlite-users@sqlite.org/msg48082.html https://bugzilla.redhat.com/show_bug.cgi?id=494266 Fix: build it with -fno-strict-aliasing %build +export CFLAGS="$RPM_OPT_FLAGS -fno-strict-aliasing" %configure --disable-static -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 570870] New: perl-libwww-perl: cyclic bootstrap dependency
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=570870 http://bugzilla.novell.com/show_bug.cgi?id=570870#c0 Summary: perl-libwww-perl: cyclic bootstrap dependency Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: All OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: jengelh(a)medozas.de QAContact: qa(a)suse.de Found By: Beta-Customer Blocker: --- Trying to build perl-libwww-perl on a local BS instance fails: Expansion error on perl-libwww-perl: nothing provides perl(HTTP::Headers) required by perl-HTML-Parser. On an existing system, `rpm -q --whatprovides 'perl(HTTP::Headers)'` reveals that this resolvable is provided by perl-libwww-perl itself. Something is fouled up here. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 570665] New: /etc/init.d/lirc uses non-existing file
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=570665 http://bugzilla.novell.com/show_bug.cgi?id=570665#c0 Summary: /etc/init.d/lirc uses non-existing file Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: lnussel(a)novell.com ReportedBy: lslezak(a)novell.com QAContact: qa(a)suse.de Found By: Development Blocker: --- I was fixing bug #492345 when I noticed that also /etc/init.d/lirc uses non-existing /usr/share/lirc/remotes/linux-input-layer-lircd.conf file. It should use /usr/share/lirc/remotes/devinput/lircd.conf.devinput instead. Moreover shouldn't we use /etc/lirc/lircd.conf instead of /etc/lircd.conf? (Alternatively lirc package can be fixed.) # rpm -ql lirc | grep lircd.conf /etc/lirc/lircd.conf /usr/share/doc/packages/lirc/contrib/lircd.conf # rpm -q lirc lirc-0.8.6-1.5.x86_64 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 570306] New: Java web start in System -> Monitor does not work
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=570306 http://bugzilla.novell.com/show_bug.cgi?id=570306#c0 Summary: Java web start in System -> Monitor does not work Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Java AssignedTo: bnc-team-java(a)forge.provo.novell.com ReportedBy: iron.bone(a)wp.pl QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Opera/9.80 (X11; Linux i686; U; pl) Presto/2.2.15 Version/10.10 After clicking (standard menu) System -> Java Web Start have no effect. The link is just to /.../javaws but this program called without any parameters only prints info to the terminal. Maybe better to call /.../javaws -viewer Reproducible: Always Steps to Reproduce: Just click on the link -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 570183] New: libpoppler security upgrade breaks xpdf
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=570183 http://bugzilla.novell.com/show_bug.cgi?id=570183#c0 Summary: libpoppler security upgrade breaks xpdf Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: daved(a)windclimber.id.au QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=336274) --> (http://bugzilla.novell.com/attachment.cgi?id=336274) PDF file which triggers Segmentation violation User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.1.6) Gecko/20091206 SeaMonkey/2.0.1 After doing online update to libpoppler 0.12.0-3.7.1 (x86_64) xpdf reports segmentation violation when opening some pdf files, before opening a window. Reverting to /usr/lib64/libpoppler.so.5.0.0 distributed with the 11.2 release fixes problem. I will attach a file which triggers fault. This has been confirmed on two 64 bit machines. Reproducible: Always Steps to Reproduce: 1. upgrade libpoppler (on 64 bit machine) 2. open attached PDF file with xpdf 3. Actual Results: Segmentation fault Expected Results: file displayed -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

2 57

← Newer
1
2
3
4
5
6
7
...
399
Older →

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openSUSE Bugs January 2010