June 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 223800] New: kmix does not set MasterMixerDevice automatically - global hotkeys not working
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=223800 Summary: kmix does not set MasterMixerDevice automatically - global hotkeys not working Product: openSUSE 10.2 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: robin.knapp(a)fujitsu-siemens.com QAContact: qa(a)suse.de kmix does not select the master channel automatically. Global hotkeys for master channel won't work until the master channel is set up manually by right clicking on the icon and selecting "Hauptkanal auswählen" ("select master channel" I think) In this dialogue, the master channel is already selected so just pressing ok does the job and global hotkeys for the master channel work. <snip> robin@linux:~/.kde/share/config> diff kmixrc.bad kmixrc.good 4a5 > MasterMixerDevice=0 </snip> (kmixrc.bad = before selecting master channel manually, kmixrc.good = after) However, somewhere I read that XF86RaiseVolume and XF86LowerVolume should be automatically bound to volume up/down in 10.2, but I still have to set global hotkeys for this. I'm not sure if this is intended. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 237565] New: kwrite (kate) stops opening
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=237565 Summary: kwrite (kate) stops opening Product: openSUSE 10.2 Version: Final Platform: i586 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: mvdv(a)spamcop.net QAContact: sndirsch(a)novell.com Hi, Following refers to openSUSE 10.2, std pacakges, updated. Opening plain text files using kwrite from within konqueror works for a while, then starts to complain (Sorry - Konqueror): KDEinit could not launch 'kwrite'. This can be fixed by a reboot, but then reoccurs. I've seen this behavior with both kate and kwrite. running (as root) from a bash shell: # kwrite /path/to/text.file & Does work for a few days longer. Then kwrite fails to launch from the command shell. I haven't persisted long enough with kate to see if it also fails from the bash shell. The shell error is: kwrite: cannot connect to X server :0 HTH -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 389026] New: CASA PAM Configuration Disabled (in casacfgpam)
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=389026 Summary: CASA PAM Configuration Disabled (in casacfgpam) Product: openSUSE 11.0 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Security AssignedTo: security-team(a)suse.de ReportedBy: delder(a)novacoast.com QAContact: qa(a)suse.de Found By: Beta-Customer /usr/sbin/casacfgpam is included in CASA and is presumably used for to setup CASA. It unfortunately looks like it was never modified for it's original SLED install as the first few lines are: #!/bin/bash # Adding CASA pam entries to pam files only on the desktop. DESKTOP=`grep -i desktop /etc/SuSE-release` if [ "$DESKTOP" != "" ] then This check should be disable or somehow made appropriate for OpenSUSE as the pam configuration will never be setup on OpenSUSE otherwise. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 377573] New: micasad won't start
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=377573 Summary: micasad won't start Product: openSUSE 11.0 Version: Factory Platform: i586 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: sbrys(a)novell.com QAContact: qa(a)suse.de Found By: Field Engineer Environment: - openSUSE 11.0 (i586) Alpha3 - CASA packages: -------------------------/snip/------------------------- linux-lh7i:~ # rpm -qa|grep -i casa CASA-gui-1.7.1464-85 CASA-1.7.1464-85 yast2-CASA-1.7.1461-94 -------------------------/snip/------------------------- Steps to duplicate: -------------------------/snip/------------------------- linux-lh7i:~ # rcmicasad start Starting miCASA daemon done linux-lh7i:~ # rcmicasad status Checking miCASA daemon unused -------------------------/snip/------------------------- -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 20

[Bug 399810] New: mousetweaks + metacity + title bar context menu == wtf?
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=399810 User jpryor(a)novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=399810#c399801 Summary: mousetweaks + metacity + title bar context menu == wtf? Product: openSUSE 11.0 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: jpryor(a)novell.com QAContact: qa(a)suse.de Found By: --- Enable mousetweaks (see #399801). Once enabled you should be able hold down the primary mouse button for a short period of time on the Desktop to display the Desktop context menu. Now, hold down the primary key on a non-maximized window's title bar for a short period of time *without* moving the mouse. Expected behavior: display of the title bar context menu. Actual behavior: The window moves (!) so that it overlaps the top-left corner of your screen, and the context menu of whatever was below the moved window before it moved is displayed (e.g. the Deskstop context menu). Fine print: this is on a dual-screen setup; perhaps that has something to do with it? May not be specific to metacity; didn't try another window manager. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 340720] New: rename linux-kernel-headers
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=340720 Summary: rename linux-kernel-headers Product: openSUSE 11.0 Version: unspecified Platform: All OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: jengelh(a)gmx.de QAContact: qa(a)suse.de Found By: Beta-Customer A lot of newbies think that linux-kernel-headers are required for kernel module building and accordingly get confused when its version number is not the same as kernel-$yourFlavor and come up with blame on lkh.rpm. Suggestion to rename linux-kernel-headers to e.g. glibc-linux-headers. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 385957] New: Files encrypted by mcrypt cannot be unencrypted on older systems
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=385957 Summary: Files encrypted by mcrypt cannot be unencrypted on older systems Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Security AssignedTo: security-team(a)suse.de ReportedBy: R.Vickers(a)cs.rhul.ac.uk QAContact: qa(a)suse.de Found By: Customer The changelog for mcrypt indicates that the OpenPGP file format is now the default. However: (1) this change is not documented in the man page (2) the man page does not describe how to change the default back again (3) Files encrypted under 10.3 cannot be unencrypted under at least some other systems, e.g. SuSE 10.2 and Windows: see bug 385951 mcrypt is designed to be a simple program usable by people with no understanding of cryptography, so in my opinion it is vital that defaults are chosen to provide maximum interoperability. If the default cannot be changed back I suggest that at the very least the man page should describe how to create files that can be read on other systems. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 394491] New: Synaptics driver does not support ALPS GlidePoint touchpad anymore
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=394491 Summary: Synaptics driver does not support ALPS GlidePoint touchpad anymore Product: openSUSE 11.0 Version: Beta 3plus Platform: x86-64 OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fs(a)novell.com QAContact: qa(a)suse.de Found By: Documentation This error exists since the 10.3 Kernel Update to 2.6.22.12 and is present on 11.0, too. The ALPS GlidePoint touchpad works fine (under X) with Kernels 2.6.22.5 and 2.6.22.9 (first official Kernel patch for 10.3). Installing 2.6.22.12 (the second Kernel update for 10.3) causes the touchpad to quit working (resulting in random pointer movements and clicks). Here is the hwinfo --mouse part of the touchpad: ############################ 54: PS/2 00.0: 10500 PS/2 Mouse [Created at input.183] UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port_logicaldev_input_0 Unique ID: AH6Q.5+smWHVjPI3 Hardware Class: mouse Model: "AlpsPS/2 ALPS GlidePoint" Vendor: 0x0002 Device: 0x0008 "AlpsPS/2 ALPS GlidePoint" Compatible to: int 0x0210 0x0003 Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event3, /dev/input/by-path/platform-i8042-serio-2-event-mouse, /dev/input/by-path/platform-i8042-serio-2-mouse Device Number: char 13:63 (char 13:33) Driver Info #0: Buttons: 3 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=no, avail=yes, need=no, active=unknown ############################ -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18

[Bug 332729] New: adding users: ask about disabling autologin only for second user
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=332729 Summary: adding users: ask about disabling autologin only for second user Product: openSUSE 10.3 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: jsrain(a)novell.com Found By: --- You have user A with autologin on, you have user B (login enabled). You are adding the third user -- C. What is the point at this moment (2 users defined already) if user A should have disabled autologin. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 384254] New: nscd: error in %post
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=384254 Summary: nscd: error in %post Product: openSUSE 11.0 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: pbaudis(a)novell.com ReportedBy: thoenig(a)novell.com QAContact: qa(a)suse.de Found By: --- Just saw that when updating my workstation: * Installing: nscd-2.8-8 Installation of nscd-2.8-8 failed: (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: insserv: Service boot.clock has to be enabled for service nscd insserv: exiting now! error: %post(nscd-2.8-8.x86_64) scriptlet failed, exit status 1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 92