May 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 387796] New: Nvidia driver VRM: bad caching on address
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=387796 Summary: Nvidia driver VRM: bad caching on address Product: openSUSE 11.0 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: X11 3rd Party Driver AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: deanjo(a)sasktel.net QAContact: sndirsch(a)novell.com Found By: --- As per http://www.nvnews.net/vbulletin/showthread.php?t=58498 I'm reporting that I am getting these warnings when booting up. May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011dcd6000: actual 0x173 != expected 0x17b May 7 08:14:39 linux klogd: NVRM: please see the README section on Cache Aliasing for more information May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011ddcb000: actual 0x173 != expected 0x17b May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011dc88000: actual 0x173 != expected 0x17b May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011dc89000: actual 0x173 != expected 0x17b May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011dca6000: actual 0x173 != expected 0x17b May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011dca7000: actual 0x173 != expected 0x17b May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011ddc6000: actual 0x173 != expected 0x17b May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011d42a000: actual 0x173 != expected 0x17b May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011e46e000: actual 0x173 != expected 0x17b May 7 08:14:39 linux klogd: NVRM: bad caching on address 0xffff81011dd8f000: actual 0x173 != expected 0x17b This is using the 173.08 drivers and the 2.6.25-26-default kernel found in opensuse 11.0 with a 8800GT. A bug-report has been filed with nvidia as well. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 381304] New: firewire/ieee1394 : using GOF repeaters does not work anymore with some adapters
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=381304 Summary: firewire/ieee1394 : using GOF repeaters does not work anymore with some adapters Product: openSUSE 10.3 Version: Final Platform: All OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: phdm(a)macqel.be QAContact: qa(a)suse.de Found By: Other Created an attachment (id=208943) --> (https://bugzilla.novell.com/attachment.cgi?id=208943) Fix the S800 repeaters problem With older kernel (Suse 9.0 e.g) using S800 Glass Optical Fiber repeaters with firewire cards worked perfectly. With 10.3, and 10.2 also, it does not work anymore : one is unable to see any firewire peripheral connected at the other end of the GOF repeaters, and any program attempting to access firewire hardware is blocked and unkillable. A whole thread discussing that problem is here : http://sourceforge.net/mailarchive/forum.php?thread_name=20080309220225.GA3… Here is the tiny patch that has been approved by the firewire/ieee1394 maintainer for inclusion in 2.6.26. It is perfectly applicable to 2.6.22. Can it be added to the kernel patches of 10.3, so that a next online_update of the kernel does not break my running machines ? Thanks in advance -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 387774] New: kvm modules don't work with xen kernel
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=387774 Summary: kvm modules don't work with xen kernel Product: openSUSE 11.0 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: sylvain.desbureaux(a)gmail.com QAContact: kernel-maintainers(a)forge.provo.novell.com Found By: --- If you install xen kernel, it's impossible to use kvm in parallel because the module given is only for the kernel without xen. Because the given source are also only for the "normal" kernel, it's not possible to build the module (except if you build the whole kernel). So, it may be very interesting to have the kvm module for XEN and the kernel headers for the xen kernel -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 379593] New: pand bluetooth network not anymore working
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=379593 User adrian(a)novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=379593#c1 Summary: pand bluetooth network not anymore working Product: openSUSE 11.0 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: adrian(a)novell.com QAContact: qa(a)suse.de CC: seife(a)novell.com Found By: --- using pand via my bluetooth cell phone does not work anymore since ~ 2 weeks with Factory (I think since kernel version upgrade). In most cases, I see nothing in the logs, just getting a timeout. Today, I got this: invalid opcode: 0000 [2] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2.4/1-2.4:1.0/hci0/acl001783A214D9/type CPU 0 Modules linked in: iptable_filter ip_tables ip6table_filter ip6_tables x_tables rndis_wlan(+) rndis_host cdc_ether usbnet mii ntfs usb_storage aes_x86_64 aes_generic nls_utf8 cifs ipv6 i915 drm af_packet snd_pcm_oss snd_mixer_oss microcode snd_seq snd_seq_device cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq bridge bnep coretemp hwmon fuse loop dm_mod rfcomm arc4 l2cap ecb crypto_blkcipher pcmcia snd_hda_intel iwl3945 snd_pcm snd_timer hci_usb iTCO_wdt yenta_socket snd_page_alloc rtc_cmos firmware_class rsrc_nonstatic snd_hwdep rtc_core sr_mod i2c_i801 pcmcia_core snd bluetooth rtc_lib cdrom dock wmi button ac battery iTCO_vendor_support intel_agp tg3 joydev mac80211 cfg80211 dcdbas soundcore i2c_core sg sd_mod ehci_hcd uhci_hcd usbcore edd ext3 mbcache jbd fan ata_piix libata scsi_mod thermal processor Pid: 5330, comm: pand Tainted: G D N 2.6.25-rc5-git2-109.2-default #1 RIP: 0010:[<ffffffff803e39be>] [<ffffffff803e39be>] ether_setup+0x4/0x7d RSP: 0018:ffff8100416cbd00 EFLAGS: 00010203 RAX: ffff81005e9b3058 RBX: ffff81005e9b3000 RCX: 0000000000000000 RDX: 000000005e9b0000 RSI: ffff81005e9b3000 RDI: ffff81005e9b3000 RBP: ffff8100416cbd18 R08: ffff8100416cbde8 R09: 00007fff0aeed44d R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: ffff81005e9b3000 R14: 0000000000000160 R15: 0000000000000001 FS: 00007f8c02ebb6f0(0000) GS:ffffffff8062e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f494c1d2000 CR3: 0000000068925000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process pand (pid: 5330, threadinfo ffff8100416ca000, task ffff8100539023c0) Stack: ffffffff8842c435 00000000fffffff4 ffff81005e9b3000 ffff8100416cbd68 ffffffff803d2907 ffff81000100e4e0 ffffffff8842c40a ffff8100416cbe22 ffff8100416cbda8 ffff81005095ad00 00000000fffffff4 ffffffff808b0710 Call Trace: [<00000000fffffff4>] Code: 93 03 f4 ff 48 01 d8 5b 41 5c c9 c3 55 89 f1 48 c7 c2 ba 39 3e 80 48 c7 c6 a0 e7 53 80 48 89 e5 e8 7c ee fe ff c9 c3 00 00 00 00<60> 01 00 00 80 4c 48 80 48 c7 87 10 04 00 00 58 38 3e 80 48 c7 RIP [<ffffffff803e39be>] ether_setup+0x4/0x7d RSP <ffff8100416cbd00> ---[ end trace 9e3312131b6d025e ]--- -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 340915] New: lockup when using tg3
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=340915#c1 Summary: lockup when using tg3 Product: openSUSE 10.2 Version: Final Platform: x86 OS/Version: openSUSE 10.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa(a)suse.de Found By: --- I get a kernel lockup if I use a tg3 (Tigon III) network card. I have two of them and they both do the same thing. These cards used to work with an older kernel, although not with openSUSE 10.2. The best info I've got is this portion of dmesg from bootup until the time it locked up. Linux version 2.6.18.8-0.7-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Tue Oct 2 17:21:08 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.3 present. Using APIC driver default IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000 AMI ) @ 0x000fa310 ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x3fff0000 ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x3fff0030 ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Detected 1792.455 MHz processor. Built 1 zonelists. Total pages: 262128 Kernel command line: root=/dev/hda2 resume=/dev/hda3 splash=silent elevator=deadline 1 bootsplash: silent mode. Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0180c000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032628k/1048512k available (1697k kernel code, 15092k reserved, 984k data, 196k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3586.47 BogoMIPS (lpj=7172958) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 2685k freed ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 1c28) CPU0: AMD Athlon(tm) XP 2200+ stepping 01 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS18 that hid as a SIS503 (compatible=1) Enabling SiS 96x SMBus. Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 8 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: cde00000-cfefffff PREFETCH window: bdb00000-cdcfffff NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1194754551.644:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 196k freed Time: tsc clocksource has been installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS735 ATA 100 (2nd gen) controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST320413A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 39876480 sectors (20416 MB) w/1024KiB Cache, CHS=39560/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 hda4 Probing IDE interface ide1... hdc: Maxtor 6Y080P0, ATA DISK drive hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100) hdc: cache flushes supported hdc: unknown partition table BIOS EDD facility v0.16 2004-Jun-25, 2 devices found Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. JBD: barrier-based sync failed on hda2 - disabling barriers parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected SiS chipset - id:1845 agpgart: AGP aperture is 64M @ 0xd0000000 usbcore: registered new driver usbfs usbcore: registered new driver hub sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted. sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ohci_hcd 0000:00:02.2: OHCI Host Controller ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.2: irq 12, io mem 0xcfffe000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18.8-0.7-default ohci_hcd usb usb1: SerialNumber: 0000:00:02.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:02.3: OHCI Host Controller ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.3: irq 5, io mem 0xcffff000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18.8-0.7-default ohci_hcd usb usb2: SerialNumber: 0000:00:02.3 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ohci_hcd 0000:00:0f.0: OHCI Host Controller ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0f.0: irq 12, io mem 0xcfffb000 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18.8-0.7-default ohci_hcd usb usb3: SerialNumber: 0000:00:0f.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-1: new device found, idVendor=046d, idProduct=c00e usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: USB-PS/2 Optical Mouse usb 2-1: Manufacturer: Logitech usb 2-1: configuration #1 chosen from 1 choice hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:0f.1: OHCI Host Controller ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:0f.1: irq 11, io mem 0xcfffc000 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.18.8-0.7-default ohci_hcd usb usb4: SerialNumber: 0000:00:0f.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-1: new full speed USB device using ohci_hcd and address 2 usb 3-1: new device found, idVendor=0409, idProduct=0058 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: USB2.0 Hub Controller usb 3-1: Manufacturer: NEC Corporation usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 4 ports detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:0f.2[C] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3 ehci_hcd 0000:00:0f.2: EHCI Host Controller ehci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:0f.2: irq 3, io mem 0xcfffdf00 ehci_hcd 0000:00:0f.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.18.8-0.7-default ehci_hcd usb usb5: SerialNumber: 0000:00:0f.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 usb 5-1: new high speed USB device using ehci_hcd and address 2 intel8x0_measure_ac97_clock: measured 52833 usecs intel8x0: clocking to 48000 usb 5-1: new device found, idVendor=0409, idProduct=0058 usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB2.0 Hub Controller usb 5-1: Manufacturer: NEC Corporation usb 5-1: configuration #1 chosen from 1 choice hub 5-1:1.0: USB hub found hub 5-1:1.0: 4 ports detected usb 3-1: USB disconnect, address 2 nvidia: module license 'NVIDIA' taints kernel. usbcore: registered new driver hiddev ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007 input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.3-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Adding 530136k swap on /dev/hda3. Priority:-1 extents:1 across:530136k JBD: barrier-based sync failed on hda2 - disabling barriers device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel(a)redhat.com JBD: barrier-based sync failed on hda2 - disabling barriers loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1194754566.968:2): AppArmor initialized JBD: barrier-based sync failed on dm-1 - disabling barriers JBD: barrier-based sync failed on dm-3 - disabling barriers TCP westwood registered USB Universal Host Controller Interface driver v3.0 tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3 eth0: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:09:5b:09:b1:69 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] eth0: dma_rwctrl[76ff000f] dma_mask[64-bit] PM: Writing back config space on device 0000:00:0b.0 at offset b (was 164514e4, writing 302a1385) PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000015) PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 164514e4, writing 3ea173b) ip_tables: (C) 2000-2006 Netfilter Core Team Bridge firewalling registered tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. PM: Writing back config space on device 0000:00:0b.0 at offset b (was 164514e4, writing 302a1385) PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000015) PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 164514e4, writing 3ea173b) ACPI: PCI interrupt for device 0000:00:0b.0 disabled PCI: Enabling device 0000:00:0b.0 (0100 -> 0102) ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3 eth0: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:09:5b:09:b1:69 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] eth0: dma_rwctrl[76ff000f] dma_mask[64-bit] PM: Writing back config space on device 0000:00:0b.0 at offset b (was 164514e4, writing 302a1385) PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000015) PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 164514e4, writing 3ea173b) NET: Registered protocol family 17 tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. PM: Writing back config space on device 0000:00:0b.0 at offset b (was 164514e4, writing 302a1385) PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000015) PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 164514e4, writing 3ea173b) PM: Writing back config space on device 0000:00:0b.0 at offset b (was 164514e4, writing 302a1385) PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000015) PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 164514e4, writing 3ea173b) tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] powernow-k8: Processor cpuid 681 not supported audit(1194754878.259:3): audit_backlog_limit=256 old=64 by auid=4294967295 audit(1194754878.435:4): audit_pid=6284 old=0 by auid=4294967295 JBD: barrier-based sync failed on dm-2 - disabling barriers agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode usb 5-1.2: new high speed USB device using ehci_hcd and address 3 usb 5-1.2: new device found, idVendor=0930, idProduct=6545 usb 5-1.2: new device strings: Mfr=0, Product=2, SerialNumber=3 usb 5-1.2: Product: USB Flash Memory usb 5-1.2: SerialNumber: 0921896143535BC3 usb 5-1.2: configuration #1 chosen from 1 choice SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. Vendor: Model: USB Flash Memory Rev: 5.00 Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete SCSI device sda: 1005568 512-byte hdwr sectors (515 MB) sda: Write Protect is off sda: Mode Sense: 23 00 00 00 sda: assuming drive cache: write through SCSI device sda: 1005568 512-byte hdwr sectors (515 MB) sda: Write Protect is off sda: Mode Sense: 23 00 00 00 sda: assuming drive cache: write through sda: sda1 sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 PM: Writing back config space on device 0000:00:0b.0 at offset b (was 164514e4, writing 302a1385) PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000015) PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 164514e4, writing 3ea173b) PM: Writing back config space on device 0000:00:0b.0 at offset b (was 164514e4, writing 302a1385) PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000015) PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 164514e4, writing 3ea173b) nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out NETDEV WATCHDOG: eth0: transmit timed out tg3: eth0: transmit timed out, resetting tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2 tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2 PM: Writing back config space on device 0000:00:0b.0 at offset b (was 164514e4, writing 302a1385) PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000015) PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 164514e4, writing 3ea173b) PM: Writing back config space on device 0000:00:0b.0 at offset b (was 164514e4, writing 302a1385) PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000015) PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 164514e4, writing 3ea173b) tg3: eth0: Link is down. tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out nfs: server 192.168.2.1 not responding, timed out -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 386500] New: YAST UI - Section title text increases in size
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=386500 Summary: YAST UI - Section title text increases in size Product: openSUSE 11.0 Version: Beta 2 Platform: x86 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: martind2000(a)gmail.com QAContact: jsrain(a)novell.com Found By: Beta-Customer Created an attachment (id=212148) --> (https://bugzilla.novell.com/attachment.cgi?id=212148) Screen shot of the out of control text When YAST is open, open the Appearance Preferences and switch between apperances. The title across the top describing the current step increases and increases until it is too big to display. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 353943] New: Release Notes: squid3 is default in openSUSE 11.0
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=353943 Summary: Release Notes: squid3 is default in openSUSE 11.0 Product: openSUSE 11.0 Version: unspecified Platform: All OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Release Notes AssignedTo: ke(a)novell.com ReportedBy: kssingvo(a)novell.com QAContact: coolo(a)novell.com Found By: Development Please add to the Release Notes that we integrate squid-3.0 into openSUSE 11.0, and it becomes the new default version of squid. Highlights in features: - Internet Content Adaptation Protocol (ICAP) support - Edge Side Includes (ESI) Missing and no longer included 2.6 features in 3.0 (complete list): - refresh_stale_hit option. Not yet ported. - ability to follow X-Forwarded-For. Not yet ported. - Full caching of Vary/ETag using If-None-Match. Only basic Vary cache supported. Not yet ported. - Mapping of server error messages. Not yet ported. - http_access2 access directive. Not yet ported. - Location header rewrites. Not yet ported. - umask directive. Not yet ported. - wais_relay. Feature dropped as it's equivalent to cache_peer + cache_peer_access. - urlgroup. Not yet ported. - collapsed forwarding. Not yet ported. Changes: - changes in logging file access.log - squid.conf has new tags, renamed tags, and removed tags. Full list of changes and features: see included file /usr/share/doc/packages/squid3/squid-3.0.STABLE1-RELEASENOTES.html Therefore we recommend to use a new config file squid.conf, and no longer to update or continue using old squid.conf file. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 385195] New: EXTFS tools no longer works with beta 11.0
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=385195 Summary: EXTFS tools no longer works with beta 11.0 Product: openSUSE 11.0 Version: Beta 1 Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Minor Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: gm1mqe(a)aol.com QAContact: jsrain(a)novell.com Found By: Beta-Customer The windows tool EXTFS no longer works with 11.0 Beta 1. I **THINK** this is due to the inode size no longer being 128. The developer of this tool is now aware of this problem and will fix it at the next release. Can you please confirm the inode size in Beta 1 is no longet the old size of 128 please? I know this is not a Suse problem but it may be of interest tpo other testers. Regards, Andy -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 387130] New: Add UTF-8 locale requirement for CUPS 1. 3 to release notes
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=387130 User jsmeix(a)novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=387130#c386853 Summary: Add UTF-8 locale requirement for CUPS 1.3 to release notes Product: openSUSE 11.0 Version: Beta 2 Platform: All OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Release Notes AssignedTo: coolo(a)novell.com ReportedBy: jsmeix(a)novell.com QAContact: coolo(a)novell.com CC: gp(a)novell.com, kssingvo(a)novell.com Found By: Development Since CUPS 1.3.4 the cupsd accepts only UTF-8 encoded stuff. This change is backward incompatible so that older CUPS clients e.g. CUPS 1.1 in SLE10 may no longer work, see for example http://www.cups.org/newsgroups.php?gcups.general+T+Q%22unsupported+charset%… Many applications which communicate with the cupsd e.g. hp-setup see bug #386853 but also the YaST printer config do also no longer work if neither a plain-7-bit-ASCII nor an UTF-8 locale is used. Fortunately our default locale setting is UTF-8 so that it works usually. Also plain text files in a non-UTF-8 encoding can no longer be printed. The printout is cut at the first non-7-bit-ASCII character. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 130561] earch the local domain by default
by bugzilla_noreply＠novell.com 07 May '08

07 May '08

https://bugzilla.novell.com/show_bug.cgi?id=130561 User coolo(a)novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=130561#c1 --- Comment #1 from Stephan Kulow <coolo(a)novell.com> 2008-05-07 08:46:13 MST --- 10.0 is out of maintenance -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0