March 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 355402] New: SuSEconfig.gtk2 kills processes
by bugzilla_noreply＠novell.com 10 Mar '09

10 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=355402 Summary: SuSEconfig.gtk2 kills processes Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Major Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: james(a)usr-local-bin.org QAContact: qa(a)suse.de Found By: Beta-Customer See $SUMMARY - this means that everytime SuSEconfig as a whole is run or the gtk2 module is run stand-alone (such as at an update) processes (such as gecko i.e. FireFox) are killed. The culprit *could* be /usr/bin/gtk-update-icon-cache - will try to be sure the next time it happens. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 49

[Bug 370656] New: Only clone mode available when using 2x DVI-D (radeonhd)
by bugzilla_noreply＠novell.com 10 Mar '09

10 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=370656 Summary: Only clone mode available when using 2x DVI-D (radeonhd) Product: openSUSE 11.0 Version: Alpha 2plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: mhopf(a)novell.com ReportedBy: sndirsch(a)novell.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Date: Thu, 13 Mar 2008 18:55:44 +0100 From: Matthias Hopf <mhopf(a)suse.de> To: xorg(a)lists.freedesktop.org Subject: RandR: multi-referenced monitor sections & problems with them I just stumbled over some strange behavior, and it definitely changed past Xserver 1.4.0 (don't know the exact version yet, bisecting this would be probably worth it). A snippet of the config I'm testing is Section "Monitor" Identifier "M1" EndSection Section "Monitor" Identifier "M2" Option "Right-Of" "M1" EndSection Section "Device" Identifier "D" Driver "radeonhd" Option "monitor-DVI-I_1/digital" "M1" Option "monitor-DVI-I_2/digital" "M2" EndSection Section "Screen" [...] Identifier "S" Device "D" Monitor "M1" EndSection [...] So basically a static multi-monitor setup for RandR 1.2, with one of the monitors additionally referenced in the Screen section. This monitor reference shouldn't be used at all, because the driver sets use_screen_monitor to FALSE for all outputs. This used to work - however, beginning with 1.4.90 the multi-monitor setup fails if and only if I use the two digital DVI outputs on this card, with DVI and VGA it works fine, with DVI/d and DVI/a it also works fine. If I remove the reference to the M1 monitor in the Screen section it works fine. If I add another monitor and reference it in the Screen section instead it works fine. It's probably difficult to reproduce this with another driver, but this shouldn't be a driver issue. Does anybody have a clue WTF is going on here, is this considered standard behavior or rather a bug? If it's standard, why is its behavior depending on the outputs (and not on the monitors)? Thanks Matthias -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 31

[Bug 339928] New: Add Upgrade if Newer Version is Available Behaviour
by bugzilla_noreply＠novell.com 10 Mar '09

10 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=339928 Summary: Add Upgrade if Newer Version is Available Behaviour Product: openSUSE 11.0 Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: YaST2 AssignedTo: benji.weber(a)gmail.com ReportedBy: francisg(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- It would be really nice to be able to have an option in the YMP file so that 1-click-install would "Upgrade if Newer Version is Available" behaviour would be available instead of "Upgrade/Install Unconditionally" as is the current method. This would be good for: * Ensuring that you don't download a lot of extra stuff that you don't need to (i.e. if I already have Package X version Y, which is the latest in the repository) * Making large scale upgrade YMPs (like KDE) possible -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 345429] New: web frontend error when "trigger rebuild" without repositories defined
by bugzilla_noreply＠novell.com 10 Mar '09

10 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=345429 Summary: web frontend error when "trigger rebuild" without repositories defined Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dmueller(a)novell.com QAContact: adrian(a)novell.com Found By: --- https://build.opensuse.org/package/show?project=home%3Adirkmueller%3Aplaygr… if you click here on trigger rebuild, you get the "nonexisting page" error: https://build.opensuse.org/package/trigger_rebuild?project=home%3Adirkmuell… while the actual error is that there are no repositories defined. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 333658] New: lots of "Out of SW-IOMMU space" log messages from SATA disks with XEN
by bugzilla_noreply＠novell.com 10 Mar '09

10 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=333658#c1 Summary: lots of "Out of SW-IOMMU space" log messages from SATA disks with XEN Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Xen AssignedTo: cgriffin(a)novell.com ReportedBy: tilman(a)imap.cc QAContact: qa(a)suse.de Found By: Customer Intel Pentium D940 on Intel DQ965GF board, two SATA hard disks fresh install of openSUSE 10.3 64 bit with all available updates ts@xenon:~> uname -a Linux xenon 2.6.22.9-0.4-xen #1 SMP 2007/10/05 21:32:04 UTC x86_64 x86_64 x86_64 GNU/Linux When booting with XEN, /var/log/messages shows many error messages like the following: Oct 13 13:27:36 xenon kernel: PCI-DMA: Out of SW-IOMMU space for 32768 bytes at device 0000:00:1f.2 Oct 13 13:27:36 xenon kernel: ata2.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x0 Oct 13 13:27:36 xenon kernel: ata2.00: cmd 60/f8:20:87:3c:d6/02:00:02:00:00/40 tag 4 cdb 0x0 data 389120 in Oct 13 13:27:36 xenon kernel: res 40/00:08:e7:30:d6/00:00:02:00:00/40 Emask 0x40 (internal error) followed by what looks like a reset of the affected disk: Oct 13 13:27:36 xenon kernel: ata2.00: configured for UDMA/133 Oct 13 13:27:36 xenon kernel: ata2: EH complete Oct 13 13:27:36 xenon kernel: sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) Oct 13 13:27:36 xenon kernel: sd 1:0:0:0: [sdb] Write Protect is off Oct 13 13:27:36 xenon kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Oct 13 13:27:36 xenon kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA The frequency of these messages is about 10 per minute after boot but seems to ebb down later. The affected hard disk is mostly sdb (ata2) which hosts the root partition, but occasionally also sda (ata1) where /boot and /home reside. When booting without XEN, no such messages appear. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 338003] New: Tracker bug for GtkFileChooser issues
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=338003 Summary: Tracker bug for GtkFileChooser issues Product: openSUSE 10.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME - Platform AssignedTo: federico(a)novell.com ReportedBy: federico(a)novell.com QAContact: qa(a)suse.de Depends on: 169809,171077,201309,228318 Found By: Development We'll use this bug to track issues in GtkFileChooser. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 40

[Bug 264844] New: Ship with totem-gstreamer and totem-xine
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=264844 Summary: Ship with totem-gstreamer and totem-xine Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: martin(a)gamesplace.info QAContact: qa(a)suse.de Currently, OpenSuSE only ships with the gstreamer Totem. It would be nice if there would be two packages, one totem-gstreamer (installed by default) package and one totem-xine package. This would make it easier for users to use xine as a backend for Totem. A user could install totem-xine from the official repositories and would just have to install a working libxine version from 3d party repositories. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 301681] New: issues with dsl connections
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=301681#c1 Summary: issues with dsl connections Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: openSUSE 10.2 Status: NEW Severity: Enhancement Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: sliwa(a)blue.cft.edu.pl QAContact: qa(a)suse.de Found By: --- When a dsl connections is set up to be started on hotplug, the "DSL Configuration Overview" shows "Started automatically at boot". When I plug the modem, firmware is loaded etc., but no pppd is started. usb 1-1: [UEAGLE-ATM] usb_control_msg error -19 usb 1-1: [ueagle-atm] ADSL device removed ohci_hcd 0000:00:02.0: wakeup usb 1-1: new full speed USB device using ohci_hcd and address 4 usb 1-1: new device found, idVendor=1110, idProduct=9022 usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice usb 1-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9022) : Eagle II usb 1-1: reset full speed USB device using ohci_hcd and address 4 usb 1-1: [ueagle-atm] pre-firmware device, uploading firmware usb 1-1: [ueagle-atm] loading firmware ueagle-atm/eagleII.fw usb 1-1: [ueagle-atm] firmware uploaded usb 1-1: USB disconnect, address 4 ohci_hcd 0000:00:02.0: wakeup usb 1-1: new full speed USB device using ohci_hcd and address 5 usb 1-1: new device found, idVendor=1110, idProduct=9021 usb 1-1: new device strings: Mfr=0, Product=2, SerialNumber=3 usb 1-1: Product: ADSL-USB Modem usb 1-1: SerialNumber: 00604C44EC66 usb 1-1: configuration #1 chosen from 1 choice usb 1-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9021) : Eagle II usb 1-1: reset full speed USB device using ohci_hcd and address 5 usb 1-1: [ueagle-atm] using iso mode usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] modem operational usb 1-1: [ueagle-atm] ATU-R firmware version : 44e2ea17 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 250427] New: MacBook Touchpad should be driven by synaptics driver (no right click otherwise)
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=250427 Summary: MacBook Touchpad should be driven by synaptics driver (no right click otherwise) Product: openSUSE 10.3 Version: Alpha 1plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: felix(a)derklecks.de QAContact: jsrain(a)novell.com After the standard install of 10.3-alpha1 there is no way to right click on a MacBook. The touchpad driven by the appletouch kernel module can be used with the x11-input-synaptics driver. http://www.popies.net/atp/ This allows much better configuration of the touchpad. http://simon.vanderlinden.eu.org/macbook-howto-emulate-the-trackpad-as-a-sy… The Installer configured the touchpad with: Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "7" Option "Device" "/dev/input/mice" Option "Name" "Apple Keyboard" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection The name is strange ... The touchpad is better configured with the lines mentioned in the blog: Section "InputDevice" Identifier "Mouse[1]" Driver "synaptics" Option "SendCoreEvents" "true" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "LeftEdge" "100" Option "RightEdge" "1120" Option "TopEdge" "50" Option "BottomEdge" "310" Option "FingerLow" "25" Option "FingerHigh" "30" Option "MaxTapMove" "220" Option "TapButton1" "1" Option "TapButton2" "3" Option "TapButton3" "2" Option "MinSpeed" "0.79" Option "MaxSpeed" "0.88" Option "AccelFactor" "0.0015" Option "SHMConfig" "on" EndSection -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 41

[Bug 374101] New: mouse configured as keyboard no input possible
by bugzilla_noreply＠novell.com 09 Mar '09

09 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=374101 Summary: mouse configured as keyboard no input possible Product: openSUSE 11.0 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fm(a)opensuse.org QAContact: jsrain(a)novell.com Found By: --- I did a fresh install on my MacBook today. I had severe problems with the bootloader therefore I am not sure whether I caused the problem. Nevertheless I think a system without keyboard is bad. So I will attach the yast2logs and the xorg.conf. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 79