November 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 441527] New: Font in Expert Partitioning tool during installation is not visible
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=441527 Summary: Font in Expert Partitioning tool during installation is not visible Product: openSUSE 11.1 Version: Factory Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mlatimer(a)novell.com QAContact: jsrain(a)novell.com Found By: Beta-NTS Services Priority: 500 During the installation of openSUSE 11.1 Beta4, on a Dell Latitide D620, the font used for dialog boxes in the Expert Partitioning tool is not visible. This problem can be seen when specifying the mount point for an existing partition. When the drop-down box is accessed, you can see the full list of default mount points. However, after selecting one, the text in the selection box is not visible. This is also true if you click in the selection box field and manually type a mount point location. There are other areas in the same tool that will likely have the same problem. To duplicate this problem, I performed a graphical-based installation from the beta4 DVD. The native resolution of my latop screen is 1440x900, but I selected 1024x768 for the resolution at the GRUB prompt. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 408702] New: When selecting "Save as" and selecting a directory removes filname
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=408702 Summary: When selecting "Save as" and selecting a directory removes filname Product: openSUSE 11.0 Version: Final Platform: x86 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: jarl(a)yaeda.org QAContact: qa(a)suse.de Found By: --- See this: http://bugs.kde.org/show_bug.cgi?id=166369 looks as if it is "rejected" at KDE.org since the error does not exist in version 4.2!? But since you are going to release 11.1 with 4.1.x then you mig be interested in solving the error!? And it DOES exist. It is very consistent too :-) Regards Jarl -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 327273] New: can't switch keyboard layouts
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=327273 Summary: can't switch keyboard layouts Product: openSUSE 10.3 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: truckk(a)inbox.lv QAContact: qa(a)suse.de Found By: --- In KDE configured 2 keyboar layouts, but can't switch between them, using Xkb. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 441531] New: KDE4 flashes black every 9 seconds
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=441531 Summary: KDE4 flashes black every 9 seconds Product: openSUSE 11.1 Version: Beta4 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: mlatimer(a)novell.com QAContact: qa(a)suse.de Found By: Beta-NTS Services Priority: 400 On a new installation of the x86_64 version of openSUSE 11.1 Beta4, on a Dell Latitude D620, KDE4 flashes black approximately every 9 seconds. Checking /var/log/Xorg.0.log, the following lines repeat at the same time: (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "DEL", prod id 40992 (II) intel(0): EDID vendor "AUO", prod id 4167 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 87.60 1440 1488 1520 1600 900 903 909 912 -hsync -vsync (54.8 kHz) (II) intel(0): EDID vendor "AUO", prod id 4167 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "DEL", prod id 40993 This installation of Beta4 was performed with the laptop undocked. While undocked, this problem did not occur. After docking the laptop (into a port replicator), and attaching an external monitor, keyboard and mouse, I reconfigured X using sax2. Now, the external monitor (Dell 2007FP) experiences this flash or flicker every 9 seconds. The Dell 2007FP is set to use 1600x1200 as its resolution. The internal LCD of the laptop uses 1440x900 (as seen in the above messages). After seeing this, I opened the laptop and saw that the laptop screen is still enabled. With both screens open, I can see the external monitor experiences the flash, but the internal screen does not. I also thought that my internal screen was disabled in my xorg.conf, but that does not seem to turn the monitor off while docked. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 427632] Wizard with steps doesn't update step status icons
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=427632 User guillaume.gardet(a)opensuse.org added comment https://bugzilla.novell.com/show_bug.cgi?id=427632#c24 --- Comment #24 from Guillaume GARDET <guillaume.gardet(a)opensuse.org> 2008-11-04 09:07:31 MST --- Still in beta4 !! I have to reopen it or the fix was not integrated to beta4? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 406622] New: French translation of gnome-packagekit not complete
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=406622 Summary: French translation of gnome-packagekit not complete Product: openSUSE 11.0 Version: Final Platform: Other OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Translations AssignedTo: ke(a)novell.com ReportedBy: guillaume.gardet(a)opensuse.org QAContact: ke(a)novell.com Found By: --- The french translation of gnome-packagekit is not complete. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 405642] New: not reconnecting to wireless network ufter being suspended for more then 20 minutes
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=405642 Summary: not reconnecting to wireless network ufter being suspended for more then 20 minutes Product: openSUSE 11.0 Version: Final Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: n.maziachvili(a)linuxgear.nl QAContact: qa(a)suse.de Found By: --- i was testing suspend to ram on my toshiba satellite a100-405. i have chosen in powermanager for suspend on lid close and autosuspend to ram on battery power after 7 minutes. glad to say that suspend to ram goes flawlessly and what also important waking from sleep works as well. but what i have noticed was little bit strange. if i would bring laptop from suspend after few (read 3-5) minutes being suspended network manager would reconnect to wireless network almost immediately. but when i left laptop for an hour in suspend and then turned it again on network manager couldn't reconnect to network and even lost all it's functionality - i couldn't even let it connect to network manually. only thing that helps in this case is to restart the computer. i have tested this case several more times to be sure. i came to conclusion that if laptop left in suspend for more the 20 minutes network manager will not reconnect to wireless network any more. please let me know with what kind of detailed information i can provide you with for you to get better incite to this problem. niko -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 438982] New: encfs cannot mount encrypted directory
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=438982 Summary: encfs cannot mount encrypted directory Product: openSUSE 11.1 Version: Beta 3 Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: mszeredi(a)novell.com ReportedBy: cstender(a)novell.com QAContact: qa(a)suse.de Found By: Development I created a new encrypted setup with the following steps: linux:~ # encfs ~/.safe ~/secure The directory "/root/.safe/" does not exist. Should it be created? (y,n) y The directory "/root/secure" does not exist. Should it be created? (y,n) y Creating new encrypted volume. Please choose from one of the following options: enter "x" for expert configuration mode, enter "p" for pre-configured paranoia mode, anything else, or an empty line will select standard mode. ?> p Paranoia configuration selected. Configuration finished. The filesystem to be created has the following properties: Filesystem cipher: "ssl/aes", version 2:1:1 Filename encoding: "nameio/block", version 3:0:1 Key Size: 256 bits Block Size: 1024 bytes, including 8 byte MAC header Each file contains 8 byte header with unique IV data. Filenames encoded using IV chaining mode. File data IV is chained to filename IV. -------------------------- WARNING -------------------------- The external initialization-vector chaining option has been enabled. This option disables the use of hard links on the filesystem. Without hard links, some programs may not work. The programs 'mutt' and 'procmail' are known to fail. For more information, please see the encfs mailing list. If you would like to choose another configuration setting, please press CTRL-C now to abort and start over. Now you will need to enter a password for your filesystem. You will need to remember this password, as there is absolutely no recovery mechanism. However, the password can be changed later using encfsctl. New Encfs Password: Verify Encfs Password: After these steps the .safe/secure dir is mounted: linux:~ # mount | grep encfs encfs on /root/secure type fuse.encfs (rw,nosuid,nodev,default_permissions) I can now create a new file and unmount the decrypted dir: linux:~ # touch ~/secure/test linux:~ # fusermount -u ~/secure/ linux:~ # mount | grep encfs linux:~ # ll ~/.safe/ total 4 -rw-r--r-- 1 root root 922 Oct 25 15:55 .encfs6.xml -rw-r--r-- 1 root root 0 Oct 25 15:57 7DpmAPju7M42PYUnD1Tx3T17 linux:~ # ll ~/secure/ total 0 If I try to remount the encrypted dir I get the following error: linux:~ # encfs ~/.safe ~/secure encfs: ./boost/spirit/utility/impl/chset/range_run.ipp:123: void boost::spirit::utility::impl::range_run<CharT>::set(const boost::spirit::utility::impl::range<CharT>&) [with CharT = char]: Assertion `r.is_valid()' failed. Abgebrochen -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 441293] New: make sax2 aware of nouveau driver and new capabilities
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=441293 Summary: make sax2 aware of nouveau driver and new capabilities Product: openSUSE 11.1 Version: Beta4 Platform: All OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: SaX2 AssignedTo: sndirsch(a)novell.com ReportedBy: danielstefanmader(a)web.de QAContact: sax2-maintainer-bugs(a)forge.provo.novell.com Found By: --- I recognized that sax2 is unable to fully configure the open nouveau drivers for NVidia graphics adapters. For one thing, it only configures only the nv driver, even when the nouveau driver is installed, and secondly, the option sax2 -r -m 0=nouveau does not seem to have the proper effect: The two outputs are not properly usable after that. Also, sax2 does not offer dualhead setup options which is easily provided by xrandr1.2 now. In order to provide good support for xrandr, the generated xorg.conf should not contain unnecessary content such as mode lines, refresh and sync rates and the like, since all this is now properly configurable through any xrandr interface. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 390846] New: radeonhd driver blocks brightness keys
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=390846 Summary: radeonhd driver blocks brightness keys Product: openSUSE 11.0 Version: Beta 3 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: cstender(a)novell.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com CC: lverhaegen(a)novell.com Found By: --- When using the radeonhd driver on my Thinkpad T60 I'm not able to change the display brithness with Fn+Home / Fn+End. Using fglrx everything works fine. Since fdo is currently down, I report this here. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14