October 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 431072] New: Zypper search doesn't find all packages
by bugzilla_noreply＠novell.com 03 Oct '08

03 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=431072 Summary: Zypper search doesn't find all packages Product: openSUSE 11.0 Version: Final Platform: i686 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: grfgguvf(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- In Zypper shell: zypper> se *gucha* S | Name | Summary | Ty --+-----------------+--------------------------------------------------------+--- | gucharmap | A Feature-Rich Unicode Character Map | sr | gucharmap-devel | Include Files and Libraries mandatory for Development. | pa | gucharmap-lang | Languages for package gucharmap | pa zypper> in gucharmap 'gucharmap' is already installed. Nothing to do. The output of search is confusing at least... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 426597] New: Triggering the manual fsck during a system upgrade kills the final upgrade phase .
by bugzilla_noreply＠novell.com 03 Oct '08

03 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=426597 Summary: Triggering the manual fsck during a system upgrade kills the final upgrade phase. Product: openSUSE 11.0 Version: Final Platform: Other OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: robin.listas(a)telefonica.net QAContact: jsrain(a)novell.com Found By: --- I recently upgraded my normal system from 10.3 to 11.0, using your complimentary retail DVD. During the first boot of the upgrade process, the "/etc/init.d/boot.localfs" script stopped bootup, because of an error in the fstab file made some partitions not mountable, and it left the system in rescue mode. I edited the line in error (a line that was correct for 10.3 was not so for 11.0), rebooted, and again it found another error. Corrected, rebooted... But the final part of the installation/upgrade did not proceed. Yast did not fire, there was no automatic installation of updated packages, no prompt to read the updated installations notes, no hardware configuration... nada. I was left at the system prompt. My guess is that the flag file that is used to trigger the final phase was deleted too early. The system is working correctly, as far as I know, but... this is a bug. IMO. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 429422] New: /usr/sbin/update-alternatives : meaning of * and + is swaped/interchanged
by bugzilla_noreply＠novell.com 03 Oct '08

03 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=429422 Summary: /usr/sbin/update-alternatives : meaning of * and + is swaped/interchanged Product: openSUSE 11.0 Version: Final Platform: All OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: funtasyspace(a)yahoo.com QAContact: qa(a)suse.de Found By: --- When I run the /usr/sbin/update-alternatives script (e.g. update-alternatives --config java) the the following text is displayed: # update-alternatives --config java There are 4 programs which provide `java'. Selection Command ----------------------------------------------- 1 /usr/lib64/jvm/jre-1.6.0-sun/bin/java 2 /usr/lib64/jvm/jre-1.5.0-gcj/bin/java + 3 /usr/lib64/jvm/jre-1.7.0-icedtea/bin/java * 4 /usr/lib64/jvm/jre-1.5.0-sun/bin/java Enter to keep the default[*], or type selection number: 3 >From the last line I would conclude, that the '*' marks the default selection and the '+' the current selection. But this is obviously not the case. If I enter '3' in the above example and run the command again, the '*' moved and not the '+' (Or do I get something wrong here? Does the '+' have a different meaning?): # update-alternatives --config java There are 4 programs which provide `java'. Selection Command ----------------------------------------------- 1 /usr/lib64/jvm/jre-1.6.0-sun/bin/java 2 /usr/lib64/jvm/jre-1.5.0-gcj/bin/java *+ 3 /usr/lib64/jvm/jre-1.7.0-icedtea/bin/java 4 /usr/lib64/jvm/jre-1.5.0-sun/bin/java Enter to keep the default[*], or type selection number: Suggested Solution: Either swap the use of '*' and '+' in the table or replace the text '*' in the last line with a '+'. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 323541] New: Thinkpad X60 tablet touchscreen not activated
by bugzilla_noreply＠novell.com 03 Oct '08

03 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=323541 Summary: Thinkpad X60 tablet touchscreen not activated Product: openSUSE 10.3 Version: Beta 3 Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: carlos.lange(a)ualberta.ca QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- The Lenovo Thinkpad X60 Tablet model 63635AU has a MultiTouch screen that works with the digital pen (WACOM Penabled) and with the fingers, as a touchscreen. I tried to activate separately the tablet feature in SaX2, using WACOM / ISDV4 Tablet PC (Serial), using COM1 and with the option "ForceDevice >>>> ISDV4", but the pen is not recognized. I also tried all options under Touchscreen (though no Wacom is available) and none of them worked either. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 76

[Bug 423197] New: WEP/WPA
by bugzilla_noreply＠novell.com 03 Oct '08

03 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=423197 Summary: WEP/WPA Product: openSUSE 11.0 Version: Final Platform: i586 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: chris(a)watsonenterprises.com QAContact: qa(a)suse.de Found By: Community User No connection with WEP or WPA on WiFi. Any card, any driver in Open Suse 11 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 430451] New: No installation source when upgrading from 11.0
by bugzilla_noreply＠novell.com 03 Oct '08

03 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=430451 Summary: No installation source when upgrading from 11.0 Product: openSUSE 11.1 Version: Beta 1 Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: novell_david(a)bailey.id.au QAContact: jsrain(a)novell.com Found By: Beta-Customer Created an attachment (id=242109) --> (https://bugzilla.novell.com/attachment.cgi?id=242109) Installation settings screen showing that there is no installation source When upgrading from 11.0 (on VMware), no installation sources are set up. See attached screenshot. There is no method of adding / changing installation media. Unable to perform upgrade / installation. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 428135] New: No internet connection/no loopback
by bugzilla_noreply＠novell.com 03 Oct '08

03 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=428135 Summary: No internet connection/no loopback Product: openSUSE 11.1 Version: Factory Platform: i686 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pilotgi(a)gmail.com QAContact: qa(a)suse.de CC: pilotgi(a)gmail.com Found By: --- Just installed 11.1 Beta1 and I can't get an internet connection. NetworkManager says I'm connected via eth0 and I have an ip address but still can't get online. The result of ifconfig eth0 shows no lo/loopback: eth0 Link encap:Ethernet HWaddr 00:17:31:6F:3C:02 inet addr:193.168.1.125 Bcast: 192.168.1.255 Mask:255.255.255.0 inet6 addr; fe80::217:31ff:fe6f:3c02/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:45 errors:0 TX packets:105 errors:0 RX bytes:8430 TX bytes:23805 Interrupt:23 Base address:0x8000 I believe that lo/loopback is usually the first line of the output from the ifconfig command. ip a does list lo in line 1: (some lines deleted cause I'm typing this by hand) 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet6 ::1/128 scope host valid_lft forever preferred_lft forever Nothing is being written to /etc/resolv.conf. var/log/NetworkManager is too long to retype here. Here is one line from dmesg that I'm not sure if it means anything: SFW2-INext-DROP-DEFLT IN=eth0 OUT=MAC=SRC=192.168.1.126 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 Also, I'm still having the same problem with my wireless connection as in bug 421638. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 431736] New: Gnome network manager applet does not work
by bugzilla_noreply＠novell.com 03 Oct '08

03 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=431736 Summary: Gnome network manager applet does not work Product: openSUSE 11.1 Version: Factory Platform: Macintosh OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: razvan.cosma(a)gmail.com QAContact: qa(a)suse.de Found By: Beta-Customer Hello, The issues outlined below target only this single application (configuring from the terminal works) so I'm filing a single report for all 1. Cannot create a new wired network profile. Steps to reproduce on my system: right-click on the tray icon, edit connections, add, select the title field, type any letter and the window closes immediately without any message. 2. Editing the pre-existing "auto eth0" profile works, I can configure a static IP, route and DNS, but the settings are not remembered after a reboot. 3. Wireless networks are remembered, and the applet tries to reconnect to the ones I have specified as "connect automatically", but the WEP key is not saved and has to be re-entered after a reboot. 4. Wireless interface appears to work, available networks are displayed, but I cannot connect. The only workaround is to rmmod ndiswrapper (Atheros card in a Macbook Pro), wait until NetworkManager detects the interface is gone, modprobe back, wait until the network is detected, and type the key as usual. The computer connects. 5. The applet does not allow for a "static DNS" option. This is more of a wanted feature than a major bug: for a mobile workstation, that connects to random networks using DHCP and several VPN solutions, it would be very useful to always keep "search mydomain.com" and a set of nameservers I trust in resolv.conf The only solution so far is to chattr +i /etc/resolv.conf but depending on the implementation this causes applications like NetworkManager or Wicd to hang indefinitely waiting for that file to be updated. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 431589] New: libevoldap-2_4-2 MUST NOT provide libldap-2_4-2 stuff
by bugzilla_noreply＠novell.com 03 Oct '08

03 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=431589 Summary: libevoldap-2_4-2 MUST NOT provide libldap-2_4-2 stuff Product: openSUSE 11.1 Version: Beta 2 Platform: Other OS/Version: Other Status: NEW Severity: Blocker Priority: P5 - None Component: Evolution AssignedTo: sragavan(a)novell.com ReportedBy: cthiel(a)novell.com QAContact: lakhil(a)novell.com CC: adrian(a)novell.com, behlert(a)novell.com, ro(a)novell.com Found By: --- libevoldap-2_4-2 is providing the same .so name that libldap-2_4-2 provides, which made it end up on the openSUSE media instead of libldap-2_4-2 -> totally breaking it. ++++++ evoldap2-client.spec ++++++ --- /var/tmp/diff_new_pack.lmf3U1/_old 2008-10-02 15:53:03.000000000 +0200 +++ /var/tmp/diff_new_pack.lmf3U1/_new 2008-10-02 15:53:03.000000000 +0200 @@ -40,7 +40,7 @@ Conflicts: evoldap-client Summary: NTLM patched OpenLDAP library for Evolution %endif -AutoReqProv: on +AutoReqProv: off Version: 2.4.11 Release: 2 Source: openldap-%{version}.tar.bz2 Please make this an explicit dependeny on evolution. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 425710] New: Libgnomecanvas repaints incorrectly when zoomed out
by bugzilla_noreply＠novell.com 02 Oct '08

02 Oct '08

https://bugzilla.novell.com/show_bug.cgi?id=425710 User auroux(a)math.mit.edu added comment https://bugzilla.novell.com/show_bug.cgi?id=425710#c336941 Summary: Libgnomecanvas repaints incorrectly when zoomed out Product: openSUSE 11.0 Version: Final Platform: i386 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: auroux(a)math.mit.edu QAContact: qa(a)suse.de CC: hmuelle(a)novell.com, federico(a)novell.com Depends on: 336941 Found By: Third Party Developer/Partner +++ This bug was initially created as a clone of Bug #336941 +++ OpenSUSE 11 again seems to include a faulty libgnomecanvas 2.20.1.1. The packages libgnomecanvas-2.20.1.1-25.2.i586.rpm and libgnomecanvas-2.20.1.1-42.1.i586.rpm both contain a version of libgnomecanvas that suffers from what seems to be the same display refresh problem as in bug #336941. 1) using libgnomecanvas 2.20.1.1 from openSUSE 11: in xournal, after zooming out until the window is wider than the page, the display is not refreshed properly when one draws. 2) the problem disappears when reverting to an official version 2.20.1.1 from ftp.gnome.org. Sorry Federico for the extra work... Thanks in advance! Denis. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2