July 2007 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 235287] New: YaST fails to configure USB scanner
by bugzilla_noreply＠novell.com 06 Nov '08

06 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=235287 Summary: YaST fails to configure USB scanner Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: Linux Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: psychonaut(a)nothingisreal.com QAContact: jsrain(a)novell.com Reproducibility: Always Hardware: HP ScanJet 5300C connected via USB Steps to reproduce: 1. Start YaST 2. Hardware->Scanner 3. "Scanner Configuration" dialog appears up with the following data: Driver Scanner -------------- ------- Not Configured USB scanner (vendor=0x03f0, product=0x0701) at libusb:002:022 net No scanner recognized by this driver 4. Select the USB scanner and click Edit 5. "Scanner Model and Driver Selection" dialog appears; "Hewlett-Packard ScanJet 5300C : Driver avision (package sane)..." is preselected. 6. Click Next 7. "Setting Up Driver avision" dialog appears. All six steps complete successfully. 8. Click Next 9. "Scanner Configuration" dialog appears up with the following data: Driver Scanner -------------- ------- Not Configured USB scanner (vendor=0x03f0, product=0x0701) at libusb:002:022 avision No scanner recognized by this driver net No scanner recognized by this driver Note that a new "avision" entry has been added, but it is not mapped to the detected scanner. The detected scanner still says "Not Configured". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 18

[Bug 245754] New: Mounting nfs4 with Kerberos at boot does work under OpenSuSE
by bugzilla_noreply＠novell.com 05 Nov '08

05 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=245754 Summary: Mounting nfs4 with Kerberos at boot does work under OpenSuSE Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: SLED 10 Status: NEW Severity: Blocker Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: schwabe(a)uni-paderborn.de QAContact: qa(a)suse.de Mounting nfs4 with sec=krb5 Exports does not work under openSuSE 10.2. For mounting nfs4 sec=krb5 you need gssd and idmapd running but the nfs skript does require gssd,idmapd. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 286759] New: boot.rootfsck remounts unneededly
by bugzilla_noreply＠novell.com 05 Nov '08

05 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=286759 Summary: boot.rootfsck remounts unneededly Product: openSUSE 10.3 Version: Alpha 5 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: ro(a)novell.com ReportedBy: coolo(a)novell.com QAContact: qa(a)suse.de CC: hare(a)novell.com, olh(a)novell.com Found By: --- boot.rootfsck remounts the / partion without any need to do so # remount in any case to apply additional options like xattr mount -n -o remount,rw / The / partion leaves the initrd mounted rw and with the correct options. And this very remount breaks fcache support as it ends and restarts priming. It should just go. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 238743] New: Lists in patch descriptions
by bugzilla_noreply＠novell.com 05 Nov '08

05 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=238743 Summary: Lists in patch descriptions Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: msvec(a)novell.com QAContact: jsrain(a)novell.com It would be good if lists in patch descriptions are actually displayed as lists instead of compound together, like ATM: zypper online update to fix the following bugs: - search does not show installed packages (bug #224673) - error message when trying to install an already installed package (bug #224129) - inappropriate error message if package integrity check fails (bug #224216) - missing notification if no update sources are configured (#226067) - zypper patches shows duplicates from different sources (#223844) - show a comprehensive message when another instance of ZYPP is running when zypper is being started (#227073) - fixed to be compatible even with krpmview in cases of errors (#223795) Or we should use normal sentences in the description (although lists are nicer for overview and thus preferable). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 5

[Bug 214956] New: online update still fails with timeout V 2.13.43.2-0.2
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=214956 Summary: online update still fails with timeout V 2.13.43.2-0.2 Product: SUSE Linux 10.1 Version: Final Platform: i386 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Critical Priority: P5 - None Component: Update Problems AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alpha096(a)tpg.com.au QAContact: jsrain(a)novell.com V 2.13.43.2-0.2 of on line update still fails with timeout - see screen shot. Please amend ZMD time out parameter. This may be dupe - Hard to tell with different versions and many fixes have been attempted -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 11

[Bug 213233] New: On-line Update - fails in resole dependencies and unable to install new updates indicated by ZEN updates
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=213233 Summary: On-line Update - fails in resole dependencies and unable to install new updates indicated by ZEN updates Product: SUSE Linux 10.1 Version: Final Platform: i386 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Major Priority: P5 - None Component: Update Problems AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alpha096(a)tpg.com.au QAContact: jsrain(a)novell.com I Noticed and ZEN online update just released has caused a problem. The recent online distribution in 4 New updates updated YAST2 online update. YAST updates and displayed YAST will close and restart after that process ZMD still indicates the are updates, however there cannot be installed by On-line update. The following message from root indices problems with On-line update version couston@scott:~> su Password: scott:/home/couston # rpm -q libzypp zen-updater libzypp-1.3.2-0.9 zen-updater-7.1.0-51.30 scott:/home/couston # root email indicates Waking up ZMD...Done The following updates are required: Resolving Dependencies... ERROR: Dependency resolution failed: Unresolved dependencies: Updating patch:libzypp-logging-2158-0.noarch[System packages] to patch:libzypp-logging-2158-0.noarch[20061011-181226] Can't install patch:libzypp-logging-2158-0.noarch[20061011-115300], since patch:libzypp-logging-2158-0.noarch[20061011-181226] is already marked as needing to be installed Marking this resolution attempt as invalid. Current display indicates updates are available, however this new version of YAST online update goes black when ZMD indicates updates are required. We have to get On-line update finally fixed be have has the following versions as We need either to roll-back current version of YOU or correct it again. Please do not release v 10.2 until YOU is finally fixed and will not cause errors as without it this functioning correctly we can can fit nothing. This problem may well have been resolved or rolled-back as of today? New On-line Update - fails in resole dependencies and unable to install new updates indicated by ZEN updates -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 226570] New: ZMD unable to resolve dependancy
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=226570 Summary: ZMD unable to resolve dependancy Product: SUSE Linux 10.1 Version: Final Platform: i386 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Major Priority: P5 - None Component: Update Problems AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alpha096(a)tpg.com.au QAContact: jsrain(a)novell.com In the following ZEN email to root the following error was found. Quote Resolving Dependencies... ERROR: Resolvable tar 2343-0 (http://ftp.isu.edu.tw/pub/Linux/SuSE/update/10.1) not found. Unquote It is more interesting to note that ZMD appears NOT to use the mirror as defined in the update source but always uses the above URL - I find this very very strange as whilst the above URL may have an update the mirror which online updates uses may not yet have the update file yet. This is severe limitation bound to cause problems as you may, on the advise of ZEN to perform an online update and your mirror may not have the files yet. This could lead to a whole host of further problems. I can find NO reason why ZEN should not follow the same online update source whether it be HTTP FTP no NFS. This is dangerous as well. Yast logs to follow -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 18

[Bug 241611] New: incorrect snmptrapd initscript
by bugzilla_noreply＠novell.com 03 Nov '08

03 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=241611 Summary: incorrect snmptrapd initscript Product: SUSE Linux 10.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: rich(a)hq.vsaa.lv QAContact: qa(a)suse.de actually, a sles 10 problem. snmptrapd init script, located in /usr/share/doc/packages/net-snmp, has slightly incorrect snmptrapd start command : startproc $SNMPTRAPD -c /etc/snmptrapd.conf -Lf /var/log/net-snmpd.log there are two problems with this : 1. config file actually resides in /etc/snmp/ 2. if the config file path is correct, this leads to another problem - the file is read twice, because snmptrapd by default reads the configuration file and it can read several files (and it can read the same file twice). this leads to, for example, scripts being executed twice and so on. there are two simple solutions (unless snmptrapd behaviour is modified) : a) add -C switch; b) remove "-c /etc/snmptrapd.conf" note that file header says : # Copyright (c) 1996-2002 SuSE GmbH Nuernberg, Germany. All rights reserved. # # Author: Christopher Mahmood <ckm(a)suse.de>, 2002 additionally, would be nice to have the file by default available in /etc/init.d, as snmpd init script is available - but i won't open a new enhancement report regarding this unless requested. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 7

[Bug 293548] New: Sound just on one side: Ich7
by bugzilla_noreply＠novell.com 01 Nov '08

01 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=293548 Summary: Sound just on one side: Ich7 Product: openSUSE 10.3 Version: Alpha 6 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: felix(a)derklecks.de QAContact: qa(a)suse.de Found By: --- I just recognized that stereo is not working on my MacBook. The MacBook contains the following sound card: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) Using alsamixer and decreasing or increasing the soundlevel on the left side does not change anything. (pressing q and z) These are my software Versions kernel-default-2.6.22-5 alsa-1.0.14-13 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 24

[Bug 295444] New: Soundcard Problem with Realtek ALC882M
by bugzilla_noreply＠novell.com 01 Nov '08

01 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=295444 Summary: Soundcard Problem with Realtek ALC882M Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: openSUSE 10.2 Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: daehmcke(a)onlinehome.de QAContact: qa(a)suse.de Found By: --- During power down or when System is rebooting, I can hear a loud noise like a snap from my speakers. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14