May 2007 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 266747] New: YaST Sees no patches
by bugzilla_noreply＠novell.com 06 May '07

06 May '07

https://bugzilla.novell.com/show_bug.cgi?id=266747 Summary: YaST Sees no patches Product: openSUSE 10.2 Version: Final Platform: x86-64 OS/Version: openSUSE 10.2 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: novell(a)skewray.com QAContact: jsrain(a)novell.com About three months ago was the last time I saw a patch. Openuseupdater and YaST both report that no patches have been are available for that long. I have about 6 or 8 online source catalogs available, and all are turned on and accessible. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 243036] New: SuspendToDisk (hibernate) always fails the second time
by bugzilla_noreply＠novell.com 05 May '07

05 May '07

https://bugzilla.novell.com/show_bug.cgi?id=243036 Summary: SuspendToDisk (hibernate) always fails the second time Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: danielstefanmader(a)web.de QAContact: qa(a)suse.de When putting the laptop to sleep again a second time after a successful first suspend/resume cycle, the computer always hangs: the screen goes black and the system is preparing for hibernate -- and that's it. Pressing Ctrl+Alt+Del pops up a second line which announces the system is going to reboot but nothing happens. Also no virtual console on Ctrl+Alt+F1..6 is available. The system is dead then. This has worked flawless before on 10.1, 10.2 betas and RCs and broke due to some update in 10.2 final. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 37

[Bug 263065] New: Ethernet 88E8052 sky2 driver not usable.
by bugzilla_noreply＠novell.com 05 May '07

05 May '07

https://bugzilla.novell.com/show_bug.cgi?id=263065 Summary: Ethernet 88E8052 sky2 driver not usable. Product: openSUSE 10.3 Version: Alpha 3 Platform: i586 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mario_bz(a)mgtech.com QAContact: qa(a)suse.de Using 88E8052 ethernet port in ASUS P5W64WS PRO with sky2 driver. Opensuse 10.3, ethernet hangs during receive and will not allow a full web page to display. If I go to opensuse.org the letters will appear and the normal green color will not display, the browser just spins waiting. This occurs for almost all sites. It seems only very small pages work. This was tested using Firefox and konqueror so this is not a browser issue. This problem DOES NOT occur with SUSE 10.1 or Windows. It started on 10.2 so I gave up on 10.2. I was hoping 10.3 fixed it but it did not. The motherboard is an ASUS P5W64WS PRO and ethernet is connected to a Linksys RV041 router running in 100mb. I tried: Using a gigabit switch, delete/install the device, etc. I have DMESG, CAT /PROC/INTERRUPTS, and ETHTOOL output as well as hardware info. Below is the smaller of the files. The larger HW info will be sent on request. cat: /proc/interupts: No such file or directory mario@static-host:~> cat /proc/interrupts CPU0 CPU1 0: 311516 0 IO-APIC-edge timer 1: 234 0 IO-APIC-edge i8042 6: 7072 0 IO-APIC-edge floppy 8: 5 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 4 0 IO-APIC-edge i8042 14: 14015 0 IO-APIC-edge libata 15: 0 0 IO-APIC-edge libata 17: 192 0 IO-APIC-fasteoi libata, uhci_hcd:usb2 20: 184 0 IO-APIC-fasteoi HDA Intel, uhci_hcd:usb4 21: 15672 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5 22: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 3 0 IO-A PIC-fasteoi ohci1394 218: 143 0 PCI-MSI-edge eth0 219: 83990 0 PCI-MSI-edge libata NMI: 0 0 LOC: 309755 309869 ERR: 0 MIS: 0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Current message level: 0x000000ff (255) Link detected: yes mario@static-host:~> dmesg Linux version 2.6.20.2-2-bigsmp (geeko@buildhost) (gcc version 4.1.3 20070218 (prerelease) (SUSE Linux)) #1 SMP Fri Mar 9 21:54:10 UTC 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e5000 size: 000000000001b000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 00000000bfe80000 end: 00000000bff80000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 00000000bff80000 size: 000000000000e000 end: 00000000bff8e000 type: 3 copy_e820_map() start: 00000000bff8e000 size: 0000000000052000 end: 00000000bffe0000 type: 4 copy_e820_map() start: 00000000bffe0000 size: 0000000000020000 end: 00000000c0000000 type: 2 copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2 copy_e820_map() start: 0000000100000000 size: 0000000040000000 end: 0000000140000000 type: 1 copy_e820_map() type is E820_RAM BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bff80000 (usable) BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data) BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS) BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) 4224MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 1310720) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1310720 early_node_map[1] active PFN ranges 0: 0 -> 1310720 On node 0 totalpages: 1310720 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 8448 pages used for memmap HighMem zone: 1072896 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default ACPI: RSDP (v000 ACPIAM ) @ 0x000fa4c0 ACPI: RSDT (v001 NEC 0x03000715 MSFT 0x00000097) @ 0xbff80000 ACPI: FADT (v001 A_M_I_ OEMFACP 0x03000715 MSFT 0x00000097) @ 0xbff80200 ACPI: MADT (v001 A_M_I_ OEMAPIC 0x03000715 MSFT 0x00000097) @ 0xbff80390 ACPI: SLIC (v001 NEC 0x03000715 MSFT 0x00000097) @ 0xbff80410 ACPI: OEMB (v001 A_M_I_ AMI_OEM 0x03000715 MSFT 0x00000097) @ 0xbff8e040 ACPI: HPET (v001 A_M_I_ OEMHPET 0x03000715 MSFT 0x00000097) @ 0xbff89820 ACPI: MCFG (v001 A_M_I_ OEMMCFG 0x03000715 MSFT 0x00000097) @ 0xbff89860 ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x20060113) @ 0xbff8e0c0 ACPI: SSDT (v001 AMI CPU2PM 0x00000001 INTL 0x20060113) @ 0xbff8e290 ACPI: DSDT (v001 A0590 A0590001 0x00000001 INTL 0x20060113) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000) Detected 2404.210 MHz processor. Built 1 zonelists. Total pages: 1300480 Kernel command line: root=/dev/disk/by-id/ata-ST380013AS_3JV2BB1K-part7 vga=0x31a resume=/dev/sdb6 splash=silent bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 4144448k/5242880k available (1721k kernel code, 47976k reserved, 854k data, 192k init, 3276288k highmem) virtual kernel memory layout: fixmap : 0xff8b5000 - 0xfffff000 (7464 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf8800000 - 0xff5fe000 ( 109 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc038c000 - 0xc03bc000 ( 192 kB) .data : 0xc02ae6e4 - 0xc0384214 ( 854 kB) .text : 0xc0100000 - 0xc02ae6e4 (1721 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Using HPET for base-timer Calibrating delay using timer specific routine.. 4811.60 BogoMIPS (lpj=9623203) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Early unpacking initramfs... done ACPI: Core revision 20060707 CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4808.31 BogoMIPS (lpj=9616629) CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Total of 2 processors activated (9619.91 BogoMIPS). ENABLING IO-APIC IRQs .TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=27 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO Boot video device is 0000:05:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:07: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: faa00000-feafffff PREFETCH window: cff00000-efefffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: cfe00000-cfefffff PCI: Bridge: 0000:00:1c.4 IO window: b000-bfff MEM window: fa900000-fa9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: a000-afff MEM window: fa800000-fa8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: fa700000-fa7fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 2893k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1176203195.832:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 262144k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: protected mode interface info at c000:c640 vesafb: pmi: set display start = c00cc676, set palette = c00cc6e0 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3). Console: switching to colour frame buffer device 156x60 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 input: PC Speaker as /class/input/input2 NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 192k freed Time: tsc clocksource has been installed. SCSI subsystem initialized ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] ACPI: Processor [CPU1] (supports 8 throttling states) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] ACPI: Processor [CPU2] (supports 8 throttling states) ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] libata version 2.00 loaded. ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xF886E900 ctl 0x0 bmdma 0x0 irq 219 ata2: SATA max UDMA/133 cmd 0xF886E980 ctl 0x0 bmdma 0x0 irq 219 ata3: SATA max UDMA/133 cmd 0xF886EA00 ctl 0x0 bmdma 0x0 irq 219 ata4: SATA max UDMA/133 cmd 0xF886EA80 ctl 0x0 bmdma 0x0 irq 219 scsi0 : ahci ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 293046768 sectors: LBA48 NCQ (depth 31/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ahci ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: Direct-Access ATA ST380013AS 3.05 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 < sdb5 sdb6 sdb7 > sd 1:0:0:0: Attached scsi disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 ata_piix 0000:00:1f.1: version 2.00ac7 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15 scsi4 : ata_piix ATA: abnormal status 0x7F on port 0x1F7 ata5.01: ATAPI, max UDMA/66 ata5.01: configured for UDMA/66 scsi5 : ata_piix ATA: abnormal status 0x7F on port 0x177 scsi 4:0:1:0: CD-ROM PIONEER DVD-RW DVR-109 1.58 PQ: 0 ANSI: 5 scsi 4:0:1:0: Attached scsi generic sg2 type 5 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 ata7: PATA max UDMA/100 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 17 ata8: PATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 17 scsi6 : pata_marvell BAR5:00:04 01:7F 02:22 03:C8 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 ATA: abnormal status 0x7F on port 0xAC07 scsi7 : pata_marvell BAR5:00:04 01:7F 02:22 03:C8 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 ATA: abnormal status 0x7F on port 0xA807 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sdb7 Ending clean XFS mount for filesystem: sdb7 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:1:0: Attached scsi CD-ROM sr0 iTCO_vendor_support: vendor-support=0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1b.0 to 64 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) USB Universal Host Controller Interface driver v3.0 intel_rng: FWH not detected ieee1394: Initialized config rom entry `ip1394' hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:2156: autoconfig: line_outs=4 (0x12/0x25/0x24/0x16/0x0) ALSA sound/pci/hda/hda_codec.c:2160: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2164: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2172: inputs: mic=0x17, fmic=0x14, line=0x1a, fline=0x0, cd=0x18, aux=0x0 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000e480 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.20.2-2-bigsmp uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:03:00.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.20.2-2-bigsmp uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:03:00.0 to 64 sky2 v1.10 addr 0xfa9fc000 irq 16 Yukon-EC (0xb6) rev 2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000e880 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.20.2-2-bigsmp uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected sky2 eth0: addr 00:18:f3:6c:45:6e ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ec00 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.20.2-2-bigsmp uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 usb 1-2: new low speed USB device using uhci_hcd and address 2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebfbc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb 1-2: unable to read config index 0 descriptor/all usb 1-2: can't read configurations, error -84 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.20.2-2-bigsmp ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 23 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[fa7ff800-fa7fffff] Max Packet=[2048] IR/IT contexts=[4/8] Adding 4000144k swap on /dev/disk/by-id/ata-ST380013AS_3JV2BB1K-part6. Priority:-1 extents:1 across:4000144k usb 1-2: new low speed USB device using uhci_hcd and address 4 usb 1-2: new device found, idVendor=045e, idProduct=0053 usb 1-2: new device strings: Mfr=1, Product=3, SerialNumber=0 usb 1-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) usb 1-2: Manufacturer: Microsoft usb 1-2: configuration #1 chosen from 1 choice usb 2-2: new low speed USB device using uhci_hcd and address 2 usb 2-2: new device found, idVendor=051d, idProduct=0002 usb 2-2: new device strings: Mfr=3, Product=1, SerialNumber=2 usb 2-2: Product: Smart-UPS 1500 FW:601.3.D USB FW:1.5 usb 2-2: Manufacturer: American Power Conversion usb 2-2: SerialNumber: AS0432332333 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000e5891b] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel(a)redhat.com hiddev96: USB HID v1.10 Device [American Power Conversion Smart-UPS 1500 FW:601.3.D USB FW:1.5] on usb-0000:00:1d.1-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. loop: loaded (max 8 devices) AppArmor: AppArmor initialized audit(1176203210.040:2): AppArmor initialized Adding 16777208k swap on /dev/g1/swap. Priority:-2 extents:1 across:16777208k input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] powernow: This module only works with AMD K7 CPUs IA-32 Microcode Update Driver: v1.14a <tigran(a)aivazian.fsnet.co.uk> audit(1176242421.416:3): audit_pid=3327 old=0 by auid=4294967295 sky2 eth0: enabling interface sky2 eth0: ram buffer 48K sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both NET: Registered protocol family 17 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx st: Version 20061107, fixed bufsize 32768, s/g segs 256 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 lp: driver loaded but no devices found end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 lp: driver loaded but no devices found lp: driver loaded but no devices found lp: driver loaded but no devices found -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 7

[Bug 259981] New: kdslwatch doesnot instal dependant files and dooes not un as root
by bugzilla_noreply＠novell.com 05 May '07

05 May '07

https://bugzilla.novell.com/show_bug.cgi?id=259981 Summary: kdslwatch doesnot instal dependant files and dooes not un as root Product: openSUSE 10.2 Version: Final Platform: i386 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alpha096(a)tpg.com.au QAContact: jsrain(a)novell.com If you search for 'monitor' in software management 'kadslwatch' is offered' . It does not install dependent files and dependent working directory and needs to run as root -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 6

[Bug 244799] New: network interfaces don't choose proper MTU on direct connect hosts
by bugzilla_noreply＠novell.com 05 May '07

05 May '07

https://bugzilla.novell.com/show_bug.cgi?id=244799 Summary: network interfaces don't choose proper MTU on direct connect hosts Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: suse(a)tlinx.org QAContact: qa(a)suse.de Context of problem: I will "admit" this could be considered a request for an enhancement. However, I feel the current behavior violates 'least surprise' and is due to a bug in software. If I plug 10Mb or 100Mb hardware onto an ethernet that supports 1Gb, they "just work" -- transparently. It may be the switches that do the auto filtering, not sure, but I am able to plug in a mixture of 10/100/1G devices onto a net that supports the highest speed. The same isn't true of devices that support larger packet sizes under GbE (I don't know of any slower devices that speak "jumbo" packets; packets usually ranging up to 9000 bytes instead of the standard 1500). Specific examples/descriptions: With GbE, I have some hosts that support 6000B MTU's, one with 9000B, and most with a standard 1500B MTU (note: the 6000B MTU is used by inexpensive Netgear cards, while the 9000B packets are supported on an Intel card; there are lists on the internet of cards supporting 9k or greater packet sizes. It isn't generally recommended to use packet sizes >9k as it is most common *and* because the 32-bit CRC used for ethernet packets on the link becomes less reliable with packet sizes over ~11,400 bytes. If I set two hosts' (say a 6k and 9k) to the same MTU (6000), they interact correctly, BUT, as soon as one of them tries to speak to a 1500B MTU host, any packets over 1500B are dropped. The fault doesn't correct even though I have my systems configured to do MTU discovery. Small packets between interfaces supporting different MTU's work correctly (like a login session usually continues working without a problem). But any transfers that might make use of the larger packets (file transfers) just get silently dropped. Software problem: It _appears_ that most software treats the MTU as a property of the media -- i.e. the used MTU is the maximum MTU set in "ifconfig" for a specific interface. In reality, the MTU is a property of two directly communicating MAC's (as filtered through switches). Suggested solution: I'd suggest probing the MTU size *asynchronously* -- so as not to delay initial communications. But I'd probe the MTU size supported from my local host to any directly accessible (or seen) MAC address. I'd then store MTU sizes on a per-MAC basis and expire the MTU's in the same way I would stale MAC entries. Two MACs, I believe, cannot directly communicate through a router -> the router provides the next "hop" (or MAC) that would be probed for jumbo support. As switches (and hubs) strive to be mostly invisible, MACs seen through a switch would be treated as directly connected. However, of note is the fact that the MTU for a given MAC, while constant for my local host (assuming the MAC isn't moved to a different network segment in the middle of a session; thus the reason for aging both MAC and MTU together), a different host separated by a different switch might see the MTU differently depending on that packet sizes the intervening switch supports). In initial tests, increasing packet sizes from 1500->6000 increased transfer speeds by 100-200% (from 300-400Mb up to near 600-700Mb) with a drop in cpu usage. On 10GbE, one would expect to see further differences. This is likely something that would have to go into the kernel... I'll understand if severity is changed to "RFE", but I wanted to set it as major, since the impact on performance is large (and when different packet sizes are attempted, the user will get what appear to be semi-random failures -- but only when packet sizes >1500 (or whatever the min MTU of the pair is). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 230859] New: sky2 driver hangs the machine
by bugzilla_noreply＠novell.com 05 May '07

05 May '07

https://bugzilla.novell.com/show_bug.cgi?id=230859 Summary: sky2 driver hangs the machine Product: openSUSE 10.2 Version: Final Platform: x86-64 OS/Version: Linux Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: digulla(a)hepe.com QAContact: qa(a)suse.de I have an Asus P5WDG2 WS PRO) with two ethernet chips: 01:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 14) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8052 PCI-E ASF Gigabit Ethernet Controller (rev 21) The first chip is connected to eth0 and uses the skge driver. The second one is eth1 and uses the sky2 driver. Eth0 is my internal network, eth1 is connected to my internet router. After 4h to 6 days, I'll see this in my console (Alt-F10): sky2: eth1 tx timeout After that, the machine hangs. I cannot connect to it via eth0 anymore. I cannot switch consoles and I cannot login. All that still works is SysRq or a reboot. Googling for "sky2 tx timeout" returns a whole lot of mails which suggest that there is a bug in the sky2 driver. In http://www.mail-archive.com/netdev@vger.kernel.org/msg28417.html you can read that the bug is still in 2.6.18 but I don't know if SuSE uses a specially patched driver. Here is a discussion on the netdev list about a sky2 hang: http://www.mail-archive.com/netdev@vger.kernel.org/msg28373.html But it doesn't seem to lock up the whole machine (users could unload the network driver). Since this is a RAID server, I'm quite desperate for a solution for this problem. I'll run a test with lots of network traffic to see if I can reproduce the problem somehow. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3

[Bug 227508] New: Network with Realtek 8168 controller hangs after a while
by bugzilla_noreply＠novell.com 05 May '07

05 May '07

https://bugzilla.novell.com/show_bug.cgi?id=227508 Summary: Network with Realtek 8168 controller hangs after a while Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: bwalle(a)novell.com QAContact: qa(a)suse.de With a "Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)" device on a ConRoe945G-DVI motherboard, the network hangs after a while. It's not 100 % reproducable but about 70 %. This problem corresponds to http://bugzilla.kernel.org/show_bug.cgi?id=7517. There's a patch against 2.6.19 in this bugreport. I'll attach a patch against 10.2 kernel (current CVS). The difference is only line numbers. Can somebody review this patch and apply it both to 10.2 and STABLE. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 10

[Bug 225725] New: Kernel module fixed cannot be unload
by bugzilla_noreply＠novell.com 05 May '07

05 May '07

https://bugzilla.novell.com/show_bug.cgi?id=225725 Summary: Kernel module fixed cannot be unload Product: openSUSE 10.2 Version: RC 5 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: pkirsch(a)novell.com QAContact: qa(a)suse.de On openSUSE 10.2 (X86-64), VERSION = 10.2 (RC5), Kernel 2.6.18.2-34-default, (host quake104) the 'rmmod fixed' command hangs, the module is loadable but does not unload. A strace of the command hangs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 2

[Bug 212516] New: hylafax is not able to dispatch mails to the users from etc/users using c2faxrecv, hylafax and fcpci
by bugzilla_noreply＠novell.com 05 May '07

05 May '07

https://bugzilla.novell.com/show_bug.cgi?id=212516 Summary: hylafax is not able to dispatch mails to the users from etc/users using c2faxrecv, hylafax and fcpci Product: SUSE Linux 10.1 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: ISDN AssignedTo: kkeil(a)novell.com ReportedBy: office(a)weberhofer.at QAContact: qa(a)suse.de Dispatch incoming faxes did not work, because of changes in bin/faxrcvd. I have fixed the problem by slightly modifying bin/FaxDispatch. This is a version that works here. Modified lines are #5 and #6: FILE: bin/FaxDispatch ------------------- # # Dispatch fax to email depending on own MSN or extention (ISDN lines) # sourced from faxrcvd # if [ "$CALLID3" != "" ]; then PHONEMATCH=$CALLID3\$ USERENTRY=`grep -v "^#" etc/users | grep "$PHONEMATCH"` if [ "$USERENTRY" != "" ]; then USERNAME=`echo $USERENTRY | awk '{print $1}'` SENDTO="$USERNAME" FILETYPE=pdf fi fi -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 2

[Bug 204394] New: irlan devices missing device link in /class/net/irlan*
by bugzilla_noreply＠novell.com 05 May '07

05 May '07

https://bugzilla.novell.com/show_bug.cgi?id=204394 Summary: irlan devices missing device link in /class/net/irlan* Product: openSUSE 10.2 Version: Alpha 4 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: dkukawka(a)novell.com QAContact: qa(a)suse.de The irlan module is missing a device link in sysfs (as e.g. /sys/class/net/irda1/device). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-bugs+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-bugs+help(a)opensuse.org

1 1