February 2007 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 230912] New: customer center config. -- "creating source ..." not stoppable
by bugzilla_noreply＠novell.com 16 Dec '08

16 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=230912 Summary: customer center config. -- "creating source ..." not stoppable Product: openSUSE 10.2 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: jsrain(a)novell.com Well, run it, and try to stop -- impossible. The close widget is not responding, there is not abort button, I have to wait until CCC is finished. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 13

[Bug 237309] New: yast and libzypp do not respect the disk space reserved for root user
by bugzilla_noreply＠novell.com 16 Dec '08

16 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=237309 Summary: yast and libzypp do not respect the disk space reserved for root user Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: lslezak(a)novell.com ReportedBy: lslezak(a)novell.com QAContact: jsrain(a)novell.com If e.g. root partition has 70MB free space and 500MB free space reserved for root user yast reports 570MB free. But installation of a package which is greater than 70MB fails: installing package kdelibs3-devel-doc-3.5.5-45 needs 335MB on the / filesystem Yast should display the non=root free space. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 244448] New: GRUB graphical menu partially hangs; text mode works
by bugzilla_noreply＠novell.com 10 Dec '08

10 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=244448 Summary: GRUB graphical menu partially hangs; text mode works Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fkamogee(a)yahoo.com QAContact: qa(a)suse.de I have an older machine which was just upgraded with a SATA controller and disk. I moved my openSUSE 10.2 installation to the SATA disk, and all is fine except for this. The graphical menu has three problems: -The default selection with timeout does not work. The menu does not hang completely (I can make a selection and boot), but it never boots automatically. -The animated parts get stuck almost immediately. -If I press ESC to drop to text mode, there is a message dialog, and when that is dismissed, it just hangs. When the gfxmenu is disabled entirely, text mode properly boots the default selection with timeout, and the other two problems are irrelevant. So obviously that is a usable workaround. I tried re-installing grub, both by the command line and by YaST, neither helped. Moreover, the behavior exhibited by the 10.2 DVD is even worse. IIRC, it is completely unusable. I have to prevent it from loading the graphical menu at all, which I did by mashing keys (I think F8 is the one that worked). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 13

[Bug 234545] New: sometimes the sound is broken with alsa and the maestro3 driver
by bugzilla_noreply＠novell.com 09 Dec '08

09 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=234545 Summary: sometimes the sound is broken with alsa and the maestro3 driver Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: SuSE Linux 10.0 Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: admin(a)eregion.de QAContact: qa(a)suse.de CC: suse-beta(a)cboltz.de BugsThisDependsOn: 192264 +++ This bug was initially created as a copy of Bug #192264 +++ Sometimes in KDE, the sound gets "broken" (all sounds sound like they're played with several times the speed than they're supposed to). in some cases, restarting artsd helps; in other cases, terminating arts, then reloading the alsa modules helps; in some cases, a reboot is needed. hwinfo --sound says: 19: PCI 08.0: 0401 Multimedia audio controller [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_125d_1998 Unique ID: RE4e.vQKD5pEhpk5 SysFS ID: /devices/pci0000:00/0000:00:08.0 SysFS BusID: 0000:00:08.0 Hardware Class: sound Model: "Dell ES1983S Maestro-3i PCI Audio Accelerator" Vendor: pci 0x125d "ESS Technology" Device: pci 0x1998 "ES1983S Maestro-3i PCI Audio Accelerator" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x00b0 Revision: 0x10 Driver: "Maestro3" Driver Modules: "snd_maestro3" I/O Ports: 0xd800-0xd8ff (rw) Memory Range: 0xf3ffe000-0xf3ffffff (rw,non-prefetchable) IRQ: 5 (38118 events) Module Alias: "pci:v0000125Dd00001998sv00001028sd000000B0bc04sc01i00" Driver Info #0: Driver Status: snd_maestro3 is active Driver Activation Cmd: "modprobe snd_maestro3" Config Status: cfg=yes, avail=yes, need=no, active=unknown -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 233344] New: No sound from Crystal Audio sound card
by bugzilla_noreply＠novell.com 09 Dec '08

09 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=233344 Summary: No sound from Crystal Audio sound card Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: VladCodrea(a)mail.utexas.edu QAContact: qa(a)suse.de The Crystal Audio sound card on my Dell Inspiron 3200 laptop is not properly detected and no sound applications work. Using YAST to detect legacy audio cards freezes the system. When I try to play a WAVE file, I get: user@laptop:~> playwave compilation-ogg-q0.wav ALSA lib confmisc.c:670:(snd_func_card_driver) cannot find card '0' ALSA lib conf.c:3500:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device ALSA lib confmisc.c:391:(snd_func_concat) error evaluating strings ALSA lib conf.c:3500:(_snd_config_evaluate) function snd_func_concat returned error: No such device ALSA lib confmisc.c:1070:(snd_func_refer) error evaluating name ALSA lib conf.c:3500:(_snd_config_evaluate) function snd_func_refer returned error: No such device ALSA lib conf.c:3968:(snd_config_expand) Evaluate error: No such device ALSA lib pcm.c:2143:(snd_pcm_open_noupdate) Unknown PCM default Opened audio at 22050 Hz 16 bit stereo On an earlier Debian installation (kernel 2.6.19) I was able to hear very faint music through the laptop speakers, but the application (mpg321) still triggered ALSA errors. Another person who has an Inspiron 3200 reported (http://audacityteam.org/forum/thread/184) that the sound card works after the following commands: modprobe sound modprobe ad1848 insmod uart401 insmod cs4232 io=0x530 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=5 However, typing these commands doesn't enable sound for me on OpenSuse 10.2. I am attaching the dmesg below. I'd be happy to provide any other information, try out patches, or give developers SSH access to the affected computer. Thank you. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 22

[Bug 246966] New: no automatic reconnect to network
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=246966 Summary: no automatic reconnect to network Product: openSUSE 10.3 Version: Alpha 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: aj(a)novell.com QAContact: qa(a)suse.de CC: thoenig(a)novell.com With Alpha1 automatic reconnect does not work after suspend. How to reproduce: * Laptop uses e1000 ethernet network connection * suspend to ram * resume I run nm-tool, it outputs: State: disconnected Device: eth0 ... Capabilities: ... Carrier Detect: yes ... Wired settings: Hardware Link: yes The ethernet led is blinking. If I select now in knetworkmanager manually "Wired network", nm connects to ethernet and it works fine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 28

[Bug 205721] New: getgrgid_r always returns nonsense
by bugzilla_noreply＠novell.com 04 Dec '08

04 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=205721 Summary: getgrgid_r always returns nonsense Product: openSUSE 10.2 Version: Alpha 4 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dmueller(a)novell.com QAContact: qa(a)suse.de getgrgid_r seems to fail. works on 10.1. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 13

[Bug 213941] New: LSB: ttyname_r() returns an incorrect error value on a bad filedescriptor
by bugzilla_noreply＠novell.com 04 Dec '08

04 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=213941 Summary: LSB: ttyname_r() returns an incorrect error value on a bad filedescriptor Product: openSUSE 10.2 Version: Alpha 5 plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jdluhos(a)novell.com QAContact: qa(a)suse.de Found by the LSB runtime test: When a ttyname_r() function is called on a filedescriptor that is already closed (and previously referred to a valid terminal device), the ENOTTY error is reported. This is incorrect, the EBADF error should be reported in this case. Please find the attached program that demonstrates this. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 7

[Bug 230698] New: user space programs fail compiling when including <asm/bitops.h>
by bugzilla_noreply＠novell.com 04 Dec '08

04 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=230698 Summary: user space programs fail compiling when including <asm/bitops.h> Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: SuSE Other Status: NEW Severity: Blocker Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: rnissl(a)gmx.de QAContact: qa(a)suse.de See the following excerpt of /usr/include/asm/bitops.h: static inline int fls(int x) { int r; __asm__("bsrl %1,%0\n\t" "jnz 1f\n\t" "movl $-1,%0\n" "1:" : "=r" (r) : "rm" (x)); return r+1; } #include <asm-generic/bitops/hweight.h> #endif /* __KERNEL__ */ #include <asm-generic/bitops/fls64.h> #ifdef __KERNEL__ #include <asm-generic/bitops/ext2-non-atomic.h> The file fls64.h gets included always and relies on a method fls() which is only defined in the case __KERNEL__. I'd suggest removing the #endif and #ifdef line of the above excerpt. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 6

[Bug 236712] New: /etc/bindresvprt.blacklist is incorrectly processed and effectively ignored
by bugzilla_noreply＠novell.com 04 Dec '08

04 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=236712 Summary: /etc/bindresvprt.blacklist is incorrectly processed and effectively ignored Product: SUSE Linux 10.1 Version: Final Platform: x86 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: brian(a)theharrises.plus.com QAContact: qa(a)suse.de The blacklist as supplied is effectively ignored due to the presence of a tab between the port number and associated comment. In my case, this resulted in cups not being able to function as its port 631 was stolen. The rogue line of code is in glibc-2.4/sunrpc/bindrsvprt.c, line 91: if (*tmp != '\0' || (port == ULONG_MAX && errno == ERANGE)) tmp is pointing to the first character after the port number. With the supplied blacklist, this is a tab character, resulting in the line being rejected. As far as I can see, this line serves no useful purpose and is an overkill for validation, and It should be removed. The circumvention is to delete the tabs after the port numbers in /etc/bindresvprt.blacklist. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3