December 2006 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 220869] New: Adding additional installation sources fails - at least concerning the ZMD side of it
by bugzilla_noreply＠novell.com 25 Apr '08

25 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=220869 Summary: Adding additional installation sources fails - at least concerning the ZMD side of it Product: openSUSE 10.2 Version: Beta 2 plus Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jjaeger(a)novell.com QAContact: jsrain(a)novell.com chose to add an additional installation source during installation. Got the following error: "Your service was added successfully in YaST, but could not be synchronized with ZenWorks: Error: library routine called out of sequence" NB: I didn't tamper with ZMD/Zen/YaST when selecting the installation scope. Will attach y2log in a sec. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 6

[Bug 206838] New: slideshow starts with slide 1 for each media
by bugzilla_noreply＠novell.com 25 Apr '08

25 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=206838 Summary: slideshow starts with slide 1 for each media Product: openSUSE 10.2 Version: Alpha 4 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: aj(a)novell.com QAContact: jsrain(a)novell.com For each media the slideshow is started again from the first slide. This means that I never see the last slide. We should try to show all slides and only go back to the first one once all are shown. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 6

[Bug 221725] New: Adding factory-extra installation sources does not work well
by bugzilla_noreply＠novell.com 25 Apr '08

25 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=221725 Summary: Adding factory-extra installation sources does not work well Product: openSUSE 10.2 Version: Beta 2 plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: zoz(a)novell.com QAContact: jsrain(a)novell.com At installation after "Novell Customer Center Configuration" the user is asked if he likes to add extra installation sources. There are several problems with this: 1) There is no new dialog for this. This just happens in popups while dialog "Novell Customer Center Configuration" is active. 2) There are often error 500 returned from webserver for different files. Choosing "OK" seems to proceed without further problems, but i did not check so far if these extra installation sources were added properly 3) After addition of these extra sources the dialog "Novell Customer Center Configuration" is still shown for about 20 seconds without any action. If user waits patiently it proceeds to the next dialog. But the time he has to wait is to long. Most people will probably think something does not work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3

[Bug 205577] New: Suddenly unable to login via SSH using Windows Domain logid that worked earlier
by bugzilla_noreply＠novell.com 25 Apr '08

25 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=205577 Summary: Suddenly unable to login via SSH using Windows Domain logid that worked earlier Product: SUSE Linux 10.1 Version: Final Platform: i686 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jack.hamilton(a)uboc.com QAContact: jsrain(a)novell.com PROBLEM: YaST2 > Network Services > Windows Domain Membership; affecting Windows domain logins if ABORTING/CANCELING instead of clicking FINISH even when no changes made to working configuration. SYMPTOM: Suddenly unable to login via SSH using Windows Domain logid (i.e., mydomain\jdoe) that worked earlier. /var/log/messages shows the following errors when a domain user tries to login: Sep 13 13:55:48 pcp060308pcs sshd[24767]: error: PAM: User not known to the underlying authentication module for illegal user ipss\\ub49006 from xpn-l3a7281-udp01019032uds.uboc.com Sep 13 13:55:48 pcp060308pcs sshd[24767]: Failed keyboard-interactive/pam for invalid user ipss\\ub49006 from 10.20.32.36 port 4265 ssh2 ROOT CAUSE: Apparently occurs if a priviliged user (root) goes into YaST Control Center > Network Services > Windows Domain Membership and then ABORTS or cancels. Regardless if any changes were made or if the changes were left as-is, this has the effect of breaking domain authentication. To resolve, simply click FINISH next time and confirm by trying to log into an SSH session with a domain logid. WORK-AROUND TO RESOLVE WHEN AUTHENTICATION IS BROKEN: 1. As root (or privileged account), open the YaST Control Center > Network Services > Windows Domain Membership. 2. Confirm the following are filled out and checked: Domain: Your FQDN x Also use SMB Information for Linux Authentication x Create Home Directory on Login x Offline Authentication Sharing by Users is optional. 3. Click Finished. NOTE: Even if the above are already set, clicking FINISHED seems to re-write the configuration and/or restart the services that re-read the configuration, which in turn seems to resolve the problem, until the above steps are repeated again causing the problem to re-manifest. NOTE: If the login failed and the above steps are followed, you will need to close out the original session and start a new SSH session; otherwise, the original session will always fail at the login prompt regardless of following the above steps and will make it appear that the above fix is not working. BUILD: Linux 2.6.16.13-4-default #1 Wed May 3 04:53:23 UTC 2006 i686 i686 i386 GNU/Linux HW: vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Celeron(R) CPU 2.00GHz -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 9

[Bug 225749] New: scim-32bit and scim-qtimm-32bit are not installed
by bugzilla_noreply＠novell.com 24 Apr '08

24 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=225749 Summary: scim-32bit and scim-qtimm-32bit are not installed Product: openSUSE 10.3 Version: unspecified Platform: All OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mfabian(a)novell.com QAContact: jsrain(a)novell.com scim-32bit and scim-qtimm-32bit are not installed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 26

[Bug 223714] New: questionable .la file from yast2-xml
by bugzilla_noreply＠novell.com 23 Apr '08

23 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=223714 Summary: questionable .la file from yast2-xml Product: openSUSE 10.3 Version: unspecified Platform: All OS/Version: All Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andreas.hanke(a)gmx-topmail.de QAContact: jsrain(a)novell.com yast2-xml installs /usr/lib/YaST2/plugin/libpy2ag_xml.la. As many other YaST modules are not installing their .la files, you might want to check whether this file is really needed, and remove it if it is not. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 2

[Bug 214922] New: Bootloader somehow breaks the installation - Perl module crash
by bugzilla_noreply＠novell.com 23 Apr '08

23 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=214922 Summary: Bootloader somehow breaks the installation - Perl module crash Product: openSUSE 10.2 Version: Beta 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: mvidner(a)novell.com ReportedBy: locilka(a)novell.com QAContact: jsrain(a)novell.com CC: odabrunz(a)novell.com [Bootloader_API] modules/Bootloader_API.pm(Bootloader_API::DumpLog):28 Core::SplitDevPath: Cannot get device for (hd0,1)/boot/vmlinuz [Bootloader_API] modules/Bootloader_API.pm(Bootloader_API::DumpLog):28 Core::SplitDevPath: Cannot get device for (hd0,1)/boot/initrd [scr] ../../libscr/src/include/scr/Y2AgentComponent.h(evaluate):109 Evaluating an expression, not SCR builtin [scr] ../../libscr/src/include/scr/Y2AgentComponent.h(evaluate):109 Evaluating an expression, not SCR builtin [Interpreter] <stdin>:13 Read validate failed [Interpreter] <stdin>:13 SCR::Read() failed I'll attach YaST logs -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 7

[Bug 209351] New: File /etc/sysconfig/SuSEfirewall2 not updated
by bugzilla_noreply＠novell.com 23 Apr '08

23 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=209351 Summary: File /etc/sysconfig/SuSEfirewall2 not updated Product: SUSE LINUX 10.0 Version: Final Platform: x86-64 OS/Version: SuSE Linux 10.0 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: abrahams(a)acm.org QAContact: kkaempf(a)novell.com During an update from a previous SuSE Linux installation to 10.0, the file /etc/sysconfig/SuSEfirewall2 is not being updated as it should. It should be copied from /var/adm/fillup-templates/sysconfig.SuSEfirewall2, but that does not happen, so the copy in sysconfig is an older one. However, in a new installation the file in /etc/sysconfig is correct. This bug might also affect other files in /var/adm/fillup-templates. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 9

[Bug 207596] New: Canot add installtion sources
by bugzilla_noreply＠novell.com 23 Apr '08

23 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=207596 Summary: Canot add installtion sources Product: SUSE Linux 10.1 Version: Final Platform: i586 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: djmills(a)netspace.net.au QAContact: jsrain(a)novell.com I am unable to online update or zen update. If I attempt "zen-updater" I get the icon. Clicking it brings up a window called Software Updater. Which sits there for a long time with the message "Getting update list..." before the pop-up with the message "System.MissingMethodException: Method not found: 'Novell.Zenworks.Zmd.Packaging.Public.IPackageManager.GetPatternUpdates'. in <0x00000> <unknown method> in <0x00100> Novell.Zenworks.Gui.MultiContent:get_Updates () in <0x0001c> Novell.Zenworks.Gui.UpdaterWindow:GetContent () in (wrapper delegate-invoke) System.MulticastDelegate:invoke_ContentInfo[] () in <0x0003a> Novell.Zenworks.Gui.ContentGrabber:PullContent () in <0x00049> Novell.Zenworks.Gui.ContentGrabber:RetryLoop () in (wrapper delegate-invoke) System.MulticastDelegate:invoke_void ()" appears. I have attempted to add an update location as an "Installation source (e.g. ftp.planetmirror.com/pub/linux/suse/suse/ but I get the message Unable to create installation source from URL "ftp://ftp.planetmirror.com/pub/linux/suse/suse/". Try Again? I even tried manually downloading and installing patches to do with yast - but rpm complains of missing dependencies. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 10

[Bug 224104] New: eclipse dosen't cleanly exit's under xgl
by bugzilla_noreply＠novell.com 22 Apr '08

22 Apr '08

https://bugzilla.novell.com/show_bug.cgi?id=224104 Summary: eclipse dosen't cleanly exit's under xgl Product: openSUSE 10.2 Version: RC 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Xgl AssignedTo: dreveman(a)novell.com ReportedBy: abisen(a)gmail.com QAContact: bperry(a)novell.com This would probably would be the case also with other java applications but I have not tested them. In case of eclipse even after exiting the application the processes still remains in the memory (eclipse and java). After killing them the system becomes unstable hardware Core 2 Duo / nVidia Quadro SLI mode platform x86_64 (SuSE 10.2 RC1) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 6