October 2006 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 207338] New: remove DefaultColorDepth 16 if required
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=207338 Summary: remove DefaultColorDepth 16 if required Product: openSUSE 10.2 Version: Alpha 4 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com DefaultColorDepth 16 was added after 10.1 to force depth 16 instead of depth 8, as noted in bug #144373 and others. On cards with limited amount of video ram or when the depth 16 can not work reliable, let the X11 fbdev driver use what the kernel fbdev driver currently uses. Removing DefaultColorDepth will restore the state as found in 10.1 or earlier. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 207496] New: xorg-x11-fonts: We do not have enough disk space in /etc. Exit.
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=207496 Summary: xorg-x11-fonts: We do not have enough disk space in /etc. Exit. Product: openSUSE 10.2 Version: Alpha 4 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: olh(a)novell.com QAContact: sndirsch(a)novell.com the partition below /media/floppy had some state from a few few weeks ago. manual update to 10.2a4+ failed: 6:xorg-x11-fonts ########################################### [100%] Starting SuSEconfig, the SuSE Configuration Tool... Running module fonts only Reading /etc/sysconfig and updating the system... We do not have enough disk space in /etc. Exit. Starting SuSEconfig, the SuSE Configuration Tool... Running module pango only Reading /etc/sysconfig and updating the system... We do not have enough disk space in /etc. Exit. error: %post(xorg-x11-fonts-7.1-11.noarch) scriptlet failed, exit status 1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 5

[Bug 207624] New: Warning! MD5DIR is not set: you probably called this script outside SuSEconfig...!
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=207624 Summary: Warning! MD5DIR is not set: you probably called this script outside SuSEconfig...! Product: openSUSE 10.2 Version: Alpha 4 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: sndirsch(a)novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de after an upgrade from 10.1 to 10.2a4+: Warning! MD5DIR is not set: you probably called this script outside SuSEconfig...! Using MD5DIR="/var/adm/SuSEconfig/md5"... No changes for /etc/X11/xdm/Xservers No changes for /etc/X11/xdm/xdm-config Starting service kdm done -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 26

[Bug 207619] New: wodim can not handle macbin for bootable cds
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=207619 Summary: wodim can not handle macbin for bootable cds Product: openSUSE 10.2 Version: Alpha 4 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: nadvornik(a)novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de bootiso.rpm cant be built anymore: mkisofs -r -v -chrp-boot -p 'CD-Team, http://www.suse.de/feedback' -publisher 'SuSE Linux Products GmbH' -A 'Boot ISO for openSUSE 10.2 (PPC)' -V SU10200.001 -hfs-volid 'SuSE PowerPC 10.2-20060922' -hfs-bless boot_ppc/suseboot -part --macbin --map map.txt -o boot_ppc-10.2-20060922.iso boot_ppc Scanning boot_ppc Scanning boot_ppc/ppc Scanning boot_ppc/boot Scanning boot_ppc/boot/ppc Scanning boot_ppc/suse Scanning boot_ppc/suseboot Creating HFS Volume info HFS scanning HFS scanning boot_ppc/boot HFS scanning boot_ppc/boot/ppc HFS scanning boot_ppc/ppc HFS scanning boot_ppc/suse Blessing suseboot (boot_ppc/suseboot) HFS scanning boot_ppc/suseboot Creating HFS Label Creating 1 PReP boot partition(s) CHRP boot partition 1 Writing: HFS volume header Start Block 0 Done with: HFS volume header Block(s) 8 Writing: Initial Padblock Start Block 8 Done with: Initial Padblock Block(s) 8 Writing: Primary Volume Descriptor Start Block 16 Done with: Primary Volume Descriptor Block(s) 1 Writing: End Volume Descriptor Start Block 17 Done with: End Volume Descriptor Block(s) 1 Writing: Version block Start Block 18 Done with: Version block Block(s) 1 Writing: Path table Start Block 19 Done with: Path table Block(s) 4 Writing: Directory tree Start Block 23 Done with: Directory tree Block(s) 7 Writing: Directory tree cleanup Start Block 30 Done with: Directory tree cleanup Block(s) 0 Writing: Extension record Start Block 30 Done with: Extension record Block(s) 1 Writing: The File(s) Start Block 31 12.23% done, estimate finish Fri Sep 22 08:39:49 2006 24.43% done, estimate finish Fri Sep 22 08:39:53 2006 36.63% done, estimate finish Fri Sep 22 08:39:51 2006 mkisofs: File 'boot_ppc/suseboot/Finder.bin' did grow. error: Bad exit status from /var/tmp/rpm-tmp.85900 (%build) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 2

[Bug 207625] New: no products to register after upgrade to 10.2a4+
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=207625 Summary: no products to register after upgrade to 10.2a4+ Product: openSUSE 10.2 Version: Alpha 4 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Update Problems AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com tangerine.suse.de had a 10.0 installed. This was upgraded to 10.1 at some point. Today I upgraded to 10.2a4+. The online update setup failed because of: 'no products to register' I just installed 10.2 and I expect that this 10.2 is the new product, regardless of what was there before. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3

[Bug 208668] New: udev does not create symlinks for ID_PATH rules
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=208668 Summary: udev does not create symlinks for ID_PATH rules Product: SUSE Linux 10.1 Version: Final Platform: All OS/Version: Linux Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: aj(a)novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de udev as shipped with SLES10 (and 10.1) will not create symlinks for rules with ID_PATH rules. The reason is the incomplete (or broken) /sbin/path_id. line 360 in /sbin/path_id has this: if [ -L $full_sysfs_path/subsystem ]; then This does not trigger with SLES10 kernel, the correct code branch is taken. With a newer kernel, the broken branch is used and as a result, nothing is returned and the rule does not match. If the above 'subsystem' is changed to 'sUbsystem' to hard disable the branch, a 2.6.18 will again create value symlinks. Updating udev.rpm is of course not an option. If SLES10 were based in 10.0 instead of 10.1, it would mean that one can not use the SLES10 kernel anymore after the package update because udevstart is missing. I demand an udev.rpm update with a fixed path_id. The 'subsystem' test above and its code in the branch has to go. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 208665] New: Software-Aktualisierungsfunktion does not show message
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=208665 Summary: Software-Aktualisierungsfunktion does not show message Product: SUSE Linux 10.1 Version: Final Platform: PowerPC OS/Version: Linux Status: NEW Severity: Major Priority: P5 - None Component: KDE AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: olh(a)novell.com QAContact: kde-maintainers(a)suse.de The current kernel and gnutls update has a weird 'Zusammenfassung' window. What is it supposed to tell? Looks like some useful content is missing. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 11

[Bug 209425] New: remove license files from inst-sys after displaying them
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=209425 Summary: remove license files from inst-sys after displaying them Product: openSUSE 10.2 Version: Alpha 4 plus Platform: All OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com the license files are probably only needed once after the language selection dialog. After that, please run 'rm -f /var/lib/YaST2/license/* /license.zip' to free some memory. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3

[Bug 209424] New: processing packages file needs a huge amount of memory, making install on 256mb systems impossible
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=209424 Summary: processing packages file needs a huge amount of memory, making install on 256mb systems impossible Product: openSUSE 10.2 Version: Alpha 4 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com I tried the current factory tree from nfs://dist. yast downloads all these metadata files, at some point it will be busy with 'processing packages file'. This leeds to OOM and YaST2.call and the Xorg progrocess get killed by the kernel. I'm sure this worked better a few weeks ago. After enabling 512MB swap I get a 154MB/107MB/24MB y2base process and 100MB in swap: 3094 root 18 0 154m 107m 24m S 0.0 43.2 1:41.84 y2base Tasks: 41 total, 1 running, 40 sleeping, 0 stopped, 0 zombie Cpu(s): 1.6%us, 0.0%sy, 0.0%ni, 98.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 254692k total, 242608k used, 12084k free, 2776k buffers Swap: 514040k total, 104740k used, 409300k free, 88148k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3094 root 18 0 154m 107m 24m S 0.0 43.2 1:41.84 y2base 2939 root 15 0 30736 10m 3572 S 0.0 4.1 0:05.76 Xorg 2951 root 20 0 11240 4476 3376 S 0.0 1.8 0:02.72 fvwm2 1 root 18 0 5984 3244 2172 S 0.0 1.3 0:15.32 init 2282 root 15 0 8200 3052 2336 S 0.0 1.2 0:00.72 sshd 1204 root 25 0 5728 2012 1648 S 0.0 0.8 0:00.05 bash 1207 root 25 0 5728 2012 1648 S 0.0 0.8 0:00.03 bash 1210 root 25 0 5728 2012 1648 S 0.0 0.8 0:00.01 bash 2384 root 15 0 3960 1988 1608 S 0.0 0.8 0:00.04 bash 2373 root 25 0 5856 1940 1512 S 0.0 0.8 0:00.38 YaST2.call 1300 root 25 0 5724 1848 1500 S 0.0 0.7 0:00.45 yast 3139 root 21 0 5724 1716 1448 S 0.0 0.7 0:00.02 ag_fvwm2_setlan 879 root 25 0 3604 1676 1388 S 0.0 0.7 0:00.01 lsh 1213 root 25 0 5984 1620 548 S 0.0 0.6 0:00.00 init 1214 root 18 0 3828 1612 1352 S 0.0 0.6 0:00.06 inst_setup 1290 root 18 0 7744 1444 1000 S 0.0 0.6 0:00.55 sshd 2950 root 15 0 3004 1320 1064 R 1.6 0.5 0:05.19 top 1223 messageb 17 0 5236 1052 824 S 0.0 0.4 0:00.02 dbus-daemon 1253 root 24 0 2124 704 376 S 0.0 0.3 0:00.01 klogd 386 root 12 -4 2168 680 492 S 0.0 0.3 0:00.56 udevd 1248 root 18 0 1880 484 404 S 0.0 0.2 0:00.03 syslogd.bin 3048 root 15 0 1852 468 404 S 0.0 0.2 0:00.00 FvwmCommandS 1182 nobody 18 0 2036 456 360 S 0.0 0.2 0:00.00 portmap 1180 root 15 0 1884 236 156 S 0.0 0.1 0:00.00 dhcpcd -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 12

[Bug 209429] New: yast partitioner does not offer the 'wiping partition table' option anymore
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=209429 Summary: yast partitioner does not offer the 'wiping partition table' option anymore Product: openSUSE 10.2 Version: Alpha 4 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com sda has an amiga partition table. it should become a mac partition table. There used to be a 'dd if=/dev/zero bs=1M count=123 of=$disk' in the expert partitioner. This option in the pull down menu is not offered anymore. Is it just disabled because sda2 is currently used as swap? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4