Re: [suse-amd64] SuSE 9.3 on Fujitsu Siemens V810

20 Apr 2005

      On Tue, 19 Apr 2005, drha/sek wrote:
...
is anyone out there who has successfully installed and run
SuSE 9.3 on a FSC V810 Celsius Opteron 250, 2 CPU with 8 GM
Memory and Bios 1.07?
We think of updating from SuSE 9.0, Kernel 2.4.21-280, so
my questions are:
- Is the Kernel Panic issue which we experienced with SuSE
9.2 (and was also reported on this list) resolved in 9.3?
- are Nvidia FX 4000 graphics cards running in accel mode
on X.org 6.x?
- any other known issues?
I could install it on my v810 test machine with bios 1.05. However, 
booting the newly installed system sometimes crashes the kernel. Both in 
normal boot and in failsafe boot - although with different panics:

===================================================================
Normal boot:

Bootdata ok (command line is root=/dev/hdb8 vga=0x317 selinux=0  splash=silent console=tty0 resume=/dev/hda2 console=tty console=ttyS0,38400n8)
Linux version 2.6.11.4-20a-smp (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 SMP Wed Mar 23 21:52:37 UTC 2005
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
  BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
  BIOS-e820: 00000000cff70000 - 00000000cff7f000 (ACPI data)
  BIOS-e820: 00000000cff7f000 - 00000000cff80000 (ACPI NVS)
  BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
  BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 1 -> Node 1
SRAT: Node 0 PXM 0 0-9ffff
SRAT: Node 0 PXM 0 0-7fffffff
SRAT: Node 1 PXM 1 80000000-cfffffff
Bootmem setup node 0 0000000000000000-000000007fffffff
Bootmem setup node 1 0000000080000000-00000000cff6ffff
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xe0000000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xe0000000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xe0001000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xe0001000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ e8000000 size 128 MB
CPU 1: aperture @ e8000000 size 128 MB
Built 2 zonelists
Kernel command line: root=/dev/hdb8 vga=0x317 selinux=0  splash=silent console=tty0 resume=/dev/hda2 console=tty console=ttyS0,38400n8
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1992.387 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3346452k/3407296k available (2280k kernel code, 0k reserved, 1179k data, 212k init)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
checking if image is initramfs... it is
ACPI: Looking for DSDT in initrd... not found!
  not found!
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
CPU0: AMD Opteron(tm) Processor 246 stepping 08
per-CPU timeslice cutoff: 1023.83 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 rip 6000 rsp ffff81007fe93f58
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(1) -> Node 1
AMD Opteron(tm) Processor 246 stepping 08
Total of 2 processors activated (7897.08 BogoMIPS).
Using local APIC timer interrupts.
Detected 12.452 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Brought up 2 CPUs
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
stack segment: 0000 [1] SMP
CPU 0
Modules linked in:
Pid: 21, comm: khelper Tainted: G   M   2.6.11.4-20a-smp
RIP: 0010:[<ffffffff8018eace>] <ffffffff8018eace>{link_path_walk+2926}
RSP: 0000:ffff8100cfdd9d08  EFLAGS: 00010297
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff81000109c098
RBP: 92245c6e02c94000 R08: 00000000fffffffa R09: 0000000000000000
R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8100cfc608d8
R13: ffff8100cfdd9d88 R14: ffff8100cfc6ae50 R15: 0000000000000101
FS:  0000000000000000(0000) GS:ffffffff804e3280(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00002aaaaaaae080 CR3: 000000007fe77000 CR4: 00000000000006e0
Process khelper (pid: 21, threadinfo ffff8100cfdd8000, task ffff8100cfd4c890)
Stack: 00000007638570ef ffff81007ffd0006 ffff81007ffdcb00 ffff8100cfc6ae50
        000000000000007b ffff8100cfdd9d88 ffff81007ffd9e00 ffff81007ffd0000
        00000000fffffff4 ffff81007fea44c0
Call Trace:<ffffffff8018f390>{path_lookup+448} <ffffffff80189829>{open_exec+57}
        <ffffffff80189fc9>{do_execve+105} <ffffffff80148680>{__call_usermodehelper+0}
        <ffffffff8010d295>{sys_execve+69} <ffffffff8010f729>{execve+101}
        <ffffffff80148680>{__call_usermodehelper+0} <ffffffff80148796>{____call_usermodehelper+182}
        <ffffffff8010f6bb>{child_rip+8} <ffffffff80148680>{__call_usermodehelper+0}
        <ffffffff801486e0>{____call_usermodehelper+0} <ffffffff8010f6b3>{child_rip+0}

Code: 80 7d 00 2f 0f 85 4b 01 00 00 4c 89 ef e8 60 d2 ff ff 65 48
RIP <ffffffff8018eace>{link_path_walk+2926} RSP <ffff8100cfdd9d08>
  <0>stack segment: 0000 [2] SMP
CPU 0
Modules linked in:
Pid: 23, comm: khelper Tainted: G   M   2.6.11.4-20a-smp
RIP: 0010:[<ffffffff8018eace>] <ffffffff8018eace>{link_path_walk+2926}
RSP: 0000:ffff8100cfdd9d08  EFLAGS: 00010297
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff81000109c098
RBP: 92245c6e02c94000 R08: 00000000fffffffa R09: 0000000000000000
R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8100cfc608d8
R13: ffff8100cfdd9d88 R14: ffff8100cfc6ae50 R15: 0000000000000101
FS:  0000000000000000(0000) GS:ffffffff804e3280(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00002aaaaaaae080 CR3: 000000007fe77000 CR4: 00000000000006e0
Process khelper (pid: 23, threadinfo ffff8100cfdd8000, task ffff8100cfd4c890)
Stack: 00000007638570ef ffff81007ffce006 ffff81007ffdcb00 ffff8100cfc6ae50
        000000000000007b ffff8100cfdd9d88 ffff81007ffd9c00 ffff81007ffce000
        00000000fffffff4 ffff81007fea44c0
Call Trace:<ffffffff8018f390>{path_lookup+448} <ffffffff80189829>{open_exec+57}
        <ffffffff80189fc9>{do_execve+105} <ffffffff80148680>{__call_usermodehelper+0}
        <ffffffff8010d295>{sys_execve+69} <ffffffff8010f729>{execve+101}
        <ffffffff80148680>{__call_usermodehelper+0} <ffffffff80148796>{____call_usermodehelper+182}
        <ffffffff8010f6bb>{child_rip+8} <ffffffff80148680>{__call_usermodehelper+0}
        <ffffffff801486e0>{____call_usermodehelper+0} <ffffffff8010f6b3>{child_rip+0}

Code: 80 7d 00 2f 0f 85 4b 01 00 00 4c 89 ef e8 60 d2 ff ff 65 48
RIP <ffffffff8018eace>{link_path_walk+2926} RSP <ffff8100cfdd9d08>
  <1>Unable to handle kernel NULL pointer dereference at 0000000000000657 RIP:
<ffffffff8015fccd>{__alloc_pages+237}
PGD 0
Oops: 0000 [3] SMP
CPU 0
Modules linked in:
Pid: 8, comm: khelper Tainted: G   M   2.6.11.4-20a-smp
RIP: 0010:[<ffffffff8015fccd>] <ffffffff8015fccd>{__alloc_pages+237}
RSP: 0000:ffff81007fecdc18  EFLAGS: 00010286
RAX: ffffffffffffffff RBX: ffff81000000d000 RCX: 0000000000000000
RDX: ffff81007fe6c0f0 RSI: 0000000000000001 RDI: ffffffffffffffff
RBP: ffff8100cfd4c890 R08: ffff81007fe6c0f0 R09: 0000000000000000
R10: 00000000ffffffff R11: 0000000000000010 R12: 00000000fffffff4
R13: ffff81000000e500 R14: 0000000000000001 R15: 00000000000000d0
FS:  0000000000000000(0000) GS:ffffffff804e3280(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000657 CR3: 000000007fe77000 CR4: 00000000000006e0
Process khelper (pid: 8, threadinfo ffff81007fecc000, task ffff81007fe6c0f0)
Stack: ffff810000000000 ffff81007fe6c0f0 0000001000000000 0000000000000292
        0000000000000292 ffff81000000d000 ffff8100cfd4c890 00000000fffffff4
        ffff81007fe6c0f0 0000000000804111
Call Trace:<ffffffff801775d3>{alloc_page_interleave+67} <ffffffff8015f880>{__get_free_pages+16}
        <ffffffff80135217>{copy_process+247} <ffffffff80132780>{default_wake_function+0}
        <ffffffff80136585>{do_fork+229} <ffffffff80148680>{__call_usermodehelper+0}
        <ffffffff8010f656>{kernel_thread+130} <ffffffff80148680>{__call_usermodehelper+0}
        <ffffffff801486e0>{____call_usermodehelper+0} <ffffffff8010f6b3>{child_rip+0}
        <ffffffff801486b4>{__call_usermodehelper+52} <ffffffff80148efc>{worker_thread+476}
        <ffffffff80132780>{default_wake_function+0} <ffffffff80130aa3>{__wake_up_common+67}
        <ffffffff80132780>{default_wake_function+0} <ffffffff80148d20>{worker_thread+0}
        <ffffffff8014d5f9>{kthread+217} <ffffffff8010f6bb>{child_rip+8}
        <ffffffff8014d520>{kthread+0} <ffffffff8010f6b3>{child_rip+0}

Code: 48 2b 87 58 06 00 00 48 c1 f8 08 69 c0 b7 6d db b6 89 44 24
RIP <ffffffff8015fccd>{__alloc_pages+237} RSP <ffff81007fecdc18>
CR2: 0000000000000657

===================================================================

Failsafe boot:

Bootdata ok (command line is root=/dev/hdb8 ide=nodma apm=off acpi=off vga=normal noresume selinux=0 barrier=off iommu=noforce  3  console=tty0 console=tt)
Linux version 2.6.11.4-20a-smp (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 SMP Wed Mar 23 21:52:37 UTC 2005
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
  BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 00000000bff70000 (usable)
  BIOS-e820: 00000000bff70000 - 00000000bff7f000 (ACPI data)
  BIOS-e820: 00000000bff7f000 - 00000000bff80000 (ACPI NVS)
  BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
  BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Scanning NUMA topology in Northbridge 24
Number of nodes 2
Node 0 MemBase 0000000000000000 Limit 000000007fffffff
Node 1 MemBase 0000000080000000 Limit 00000000bff70000
Using node hash shift of 24
Bootmem setup node 0 0000000000000000-000000007fffffff
Bootmem setup node 1 0000000080000000-00000000bff70000
Intel MultiProcessor Specification v1.4
     Virtual Wire compatibility mode.
OEM ID: AMD      <6>Product ID: HAMMER       <6>APIC at: 0xFEE00000
Processor #0 15:5 APIC version 16
Processor #1 15:5 APIC version 16
I/O APIC #2 Version 17 at 0xFEC00000.
I/O APIC #3 Version 17 at 0xE0000000.
I/O APIC #4 Version 17 at 0xE0001000.
Setting APIC routing to flat
Processors: 2
Checking aperture...
CPU 0: aperture @ e8000000 size 128 MB
CPU 1: aperture @ e8000000 size 128 MB
Built 2 zonelists
Kernel command line: root=/dev/hdb8 ide=nodma apm=off acpi=off vga=normal noresume selinux=0 barrier=off iommu=noforce  3  console=tty0 console=ttyS0,384008
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1991.565 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3087956k/3145152k available (2280k kernel code, 0k reserved, 1179k data, 212k init)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
checking if image is initramfs... it is
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
CPU0: AMD Opteron(tm) Processor 246 stepping 08
per-CPU timeslice cutoff: 1023.82 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 rip 6000 rsp ffff8100815d7f58
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(1) -> Node 1
AMD Opteron(tm) Processor 246 stepping 08
otal of 2 processors activated (7897.08 BogoMIPS).
Using IO-APIC 2
Using IO-APIC 3
Using IO-APIC 4
Using local APIC timer interrupts.
Detected 12.447 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Brought up 2 CPUs
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter disabled.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Unable to handle kernel paging request at 0000000000002730 RIP:
<ffffffff801207d9>{do_page_fault+809}
PGD 0
Oops: 0000 [1] SMP
CPU 1
Modules linked in:
Pid: 1, comm: swapper Tainted: G   M   2.6.11.4-20a-smp
RIP: 0010:[<ffffffff801207d9>] <ffffffff801207d9>{do_page_fault+809}
RSP: 0018:ffff810081447b98  EFLAGS: 00010212
RAX: 00000000000e0104 RBX: 0000000000000001 RCX: 0000000000000018
RDX: 0000000000000000 RSI: 00003fffffffffff RDI: 0000000000000018
RBP: ffffc20000000004 R08: 00000000bfd19000 R09: ffff8100bfd19000
R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff803d8670
R13: 0000000000000000 R14: ffff810081447c98 R15: ffff81007ffd2750
FS:  0000000000000000(0000) GS:ffffffff804e3300(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000002730 CR3: 0000000037cc3000 CR4: 00000000000006e0
Process swapper (pid: 1, threadinfo ffff810081446000, task ffff81007ffd2750)
Stack: 0000001000000000 0000000000000282 0000000000000000 ffff81000000d000
        ffff810081447c98 ffffffff80357553 0000000000000000 0000000b0000000e
        0000000000000001 ffffffff00030001
Call Trace:<ffffffff802243e0>{__up_write+48} <ffffffff80336931>{__down_read+49}
        <ffffffff80121bbc>{change_page_attr_addr+252} <ffffffff8022450d>{__up_read+29}
        <ffffffff801215fa>{global_flush_tlb+42} <ffffffff8010f505>{error_exit+0}
        <ffffffff8022da7b>{quirk_usb_early_handoff+363} <ffffffff8022da6f>{quirk_usb_early_handoff+351}
        <ffffffff8022d008>{pci_fixup_device+136} <ffffffff8022b53c>{pci_scan_single_device+1084}
        <ffffffff8022b59e>{pci_scan_slot+30} <ffffffff8022bc0f>{pci_scan_child_bus+31}
        <ffffffff8022baa6>{pci_scan_bridge+390} <ffffffff8022bc5b>{pci_scan_child_bus+107}
        <ffffffff8022be09>{pci_scan_bus_parented+377} <ffffffff8050faae>{pci_legacy_init+78}
        <ffffffff8010c232>{init+482} <ffffffff8010f6bb>{child_rip+8}
        <ffffffff8010c050>{init+0} <ffffffff8010f6b3>{child_rip+0}

Code: 48 2b 82 30 27 00 00 48 8d 0c c5 00 00 00 00 48 29 c1 48 8b
RIP <ffffffff801207d9>{do_page_fault+809} RSP <ffff810081447b98>
CR2: 0000000000002730
  <0>Kernel panic - not syncing: Attempted to kill init!

Karsten

-- 
__________________________________________creating IT solutions
Dipl.-Inf. Karsten Weiss               science + computing ag
phone:    +49 7071 9457 452            Hagellocher Weg 71-75
teamline: +49 7071 9457 681            72070 Tuebingen, Germany
email:    knweiss@science-computing.de www.science-computing.de