Hi.
Just installed the 10.3 RC1 on my old Fujitsu/Siemens Lifebook C6155.
b4 I used 10.3 Beta3
With that I had my old DLINK DWL-610 wlan pcmcia to work with aid of
ndiswrapper:
As can bee seen, my dwl-610 is shown as the dwl-510.
And the dmesg showed this:
Output of dmesg with 10.3 beta3:
ndiswrapper version 1.47 loaded (smp=yes)
ndiswrapper: driver net8180 (Realtek,10/07/2004,5.173.1007.2004) loaded
PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 0000:06:00.0 to 64
ndiswrapper: using IRQ 11
wlan0: ethernet device 00:05:5d:97:d3:0a using NDIS driver: net8180,
version: 0x500aa, NDIS version: 0x500, vendor: 'Realtek RTL8180 Wireless
LAN (Mini-)PCI NIC ', 1186:3300.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
usbcore: registered new interface driver ndiswrapper
With the same install under 10.3 RC1 I have this:
ndiswrapper version 1.47 loaded (smp=yes)
ndiswrapper: driver net8180 (Realtek,10/07/2004,5.173.1007.2004) loaded
PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:06:00.0 to 64
ndiswrapper (NdisWriteErrorLogEntry:192): log: C0001389, count: 1,
return_address: ccb6aaa0
ndiswrapper (NdisWriteErrorLogEntry:195): code: 0x401
ndiswrapper (mp_init:216): couldn't initialize device: C0000001
ndiswrapper (pnp_start_device:439): Windows driver couldn't initialize
the device (C0000001)
ndiswrapper (mp_halt:258): device c0ef8500 is not initialized - not halting
ndiswrapper: device eth%d removed
ACPI: PCI interrupt for device 0000:06:00.0 disabled
ndiswrapper: probe of 0000:06:00.0 failed with error -22
usbcore: registered new interface driver ndiswrapper
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
What could be the problem, and should I file a bugreprt ?
--
Med venlig hilsen / Best regards
Erik Jakobsen
erik_ja(a)mail.tele.dk
openSuSE 10.2 (i586)
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org