May 2004 - openSUSE KDE - openSUSE Mailing Lists

Re: ./configure error: Qt not found (KDE 3.2.2)
by Matt T. 20 May '04

20 May '04

On Wednesday 12 May 2004 16:46, Konstantinos Georgokitsos wrote: > On Tuesday 11 May 2004 20:54, Matt T. wrote: > > (you should post in english, then you get more answers on this list.) > > Ooops! > Quick recap: > On SuSE 8.1. with KDE 3.2.2 (SuSE) I get the following error with > > kmldonkey-0.10pre3> ./configure --prefix=/opt/kde3 > checking build system type... i686-pc-linux-gnu > [...] > checking for Qt... configure: error: Qt (>= Qt 3.1 (20021021)) (library > qt-mt) not found. Please check your installation! > For more details about this problem, look at the end of config.log. > Make sure that you have compiled Qt with thread support! > > > I had similar compile errors, however not about "Qt with thread support", > > but about Qt in general. Depending on how the configure script of > > kmldonkey is build, this could be also what is causing your error. > > I get the same error as above with another KDE program kalbum. which lets me assume that you see a similar problem as described in the configure script. What does your config.log say? It is in the same directory in which you configure. > > > Have a look at > > this: > > > > The reason for the error I saw was that a certain version of kde's > > acinclude.m4 or aclocal.m4 ( which you or the one who created the > > configure script for the app you try to compile probably got in an > > upgrade) does mess up the generation of the configure file. > > > > QUICK FIX: modify your configure script: > > =========================== > > 1) look for the line > > kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" > > > > 2) take out: -impl actest.h > > the line should be now: > > kde_line="$kde_line actest.ui > actest.cpp" > > > > 3) look for "klineedit" and change it to "KLineEdit" > > The line should be: > > if test -f actest.cpp && grep KLineEdit actest.cpp > /dev/null; > > That dind't help. I stll get the same error... Did you have to make the modifications as described above, or did your configure script not show the problematic lines at all? > I also saw, upon a tip, that there are new qt3 packages available from SuSE > but that didn't help either... > If my assumption is correct, you will not get rid of this error by upgrading qt or kde, but by fixing the configure script. A new version of the programs which you try to build however could help, if they do not contain the incorrect configure script anymore. <snip> HTH, Matt PS. Do not answer to my email only, but to the list, so others can see your post too and may be help ;-)

3 5

Konqueror directory browsing problem KDE 3.2.1 & SuSE 9.1
by Craig Patterson 19 May '04

19 May '04

While logged in as a non-root user, I can browse my home directory tree without a problem. If I try to browse the root directory, or it's subdirectories, Konqueror locks up. If I try to close it normally, it does nothing until it throws an error: Window with title "file:/ - Konqueror" is not responding. This window belongs to application konqueror (PID=31389, hostname=localhost). Do you wish to terminate this application? (All unsaved data in this application will be lost.) I just upgraded from SuSE 9.0 to 9.1. Didn't have this issue in 9.0.

1 0

Quick Browser bug - how to fix?
by Brad Austin 18 May '04

18 May '04

I'm currently upgrading from SuSE 8.2 to 9.1, and have run into a bug involving the KDE Quick Browser. When you add a Quick Browser button to the KDE panel, and then click on the added button, the top two items in the menu that appears are supposed to be "Open in File Manager" and "Open in Terminal". The latter is supposed to open a bash window with the cwd set to the path selected through the menu. This is how it worked in SuSE 8.2, and also how the KDE documentation at www.kde.org says it's supposed to work. Instead, the "Open in Terminal" is missing, and there are two copies of "Open in File Manager". And it's not just a matter of an incorrect label; clicking on either one opens the file manager, and there's no apparent way to get the "Open in Terminal" functionality at all. Doing a little research, I was able to find that this issue appears at least twice in the KDE bug list at bugs.kde.org, as bugs # 75893 and 80688. The comments from the KDE developers indicate that the bug does not exist in the official version of KDE, but only occurs in the SuSE distribution, as a result of something SuSE did on their end. What I was not able to find, however, and what I would like to know, is how to fix the problem. Presumably whatever SuSE did to break it should be undoable, but I don't want to have to throw out all the work that SuSE put into KDE by downloading a barebones version from kde.org and configuring everything from scratch. Is there some configuration file I can tweak, or some alternate RPM I can install in place of SuSE's version of whichever one contains the bug?

1 0

konqueror & java - suse 9.1
by Geoffrey Snyder 18 May '04

18 May '04

I've just updated my system to suse 9.1 and konqueror isn't able to run java anymore. The error I'm seeing in the konsole when I try to load a web page that's using java is: INTERNAL ERROR on Browser End: Some problem with the version 5 System error?:: No such file or directory I have konqueror set to use the java in /usr/lib/java/bin/java but it doesn't seem to find it even though I can go to the directory and execute it e.g. java -version and get: java version "1.4.2_03" Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_03-b02) Java HotSpot(TM) Client VM (build 1.4.2_03-b02, mixed mode) Is there some other java I should be pointing konqueror to? Is there some permission issue I'm missing? Mozilla 1.6 runs the java web pages without difficulty. Grateful for any pointers. Thanks. Geoff

2 6

Kde 3.2.2 split screen and ATI SUSE 9.1
by Adolph & Sharon Weidanz 15 May '04

15 May '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I don't know for sure if this is a KDE or Xfree86 problem. I had it happen before under 9.0 w/ the 2.4.21-99 (I think) and I can't remember how I fixed it. I have a Gateway 600xl with the 17.1" lcd screen (Laptop). When I am in my normal users mode the screed is split off center. If you look at control center->background, in the picture in the upper right corner shows the background with a four way split about 200 pixels x, and 150 pixels y. If I put something over the split (say superkaramba theme) it will be moved the next time I log in. Other then that it doesn't seem to affect anything else. It is just annoying. When i installed suse it said the ati card was a rv250lf. I then installed the ATI drivers and it says that it supposed to be a rv250lg. I configured the ati drivers with flgxconfig and set everything up there. I ran glxgears and only see 240fps w/ 3d enabled. Also, even thought the touchpad is selected in Yast, I've lost the ability to click using the pad. The USB mouse, which also set up seems to work fine. Funny thing is the split doesn't show up in root mode. Any help would be appreciated... - -- Adolph & Sharon Weidanz '78 43' Endeavour Ketch S/V Time To Paws -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQFApbZGlC+PSm9+eB0RAj2LAJwP5S6nK+vOoUO46MgFXnEZLXUP7gCfYA8R LibgOyRpNpXqhAK+ubsubw4= =/e9g -----END PGP SIGNATURE-----

1 0

How to change teh size of icons in the kde-menu
by Alistair Hamilton 14 May '04

14 May '04

Hi, all I have KDE3.2 on SUSE 9.1. I have spent ages digging around in the control centre but I can find nowhere to change the size of the icons in the main KDE menu. I think that they are 32x32 pixels. This means that the menu does not fit in a single vertical column in my 1280x1024 display, which is *very* annoying. Any help would be very welcome. Thanks Alistair

3 3

Logon problem on SuSE Linux 9.1 Professional
by George Stoianov 14 May '04

14 May '04

Hi, I have installed SuSE Linux 9.1 Professional recently and I am having a problem when trying to logon as a particular user. Here is what happens: I created a user as root and then logged on to the system KDE session and everything is OK. The next day I try to log in as that same user and no matter what window manager I choose I get back to the logon screen and cannot get anything started. If I create a new user as root again that user works fine without problems until the following day when I reboot my computer. Thank you for any advice. George Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout ! Créez votre Yahoo! Mail sur http://fr.benefits.yahoo.com/ Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !Téléchargez Yahoo! Messenger sur http://fr.messenger.yahoo.com

1 0

vector graphics
by Mario Streiber 14 May '04

14 May '04

Hi all, is there a KDE program available to create relatively simple vector graphics? I found Karbon14 in my menus but it crashes permanently. I also tried sodipodi but I don't like it very much. Don't know how to diplay sizes of existing objects. There is a context menu item called properties which seems to display this info, but I can't interpret it. If someone knows a good non-KDE program, please let me know. Mario

4 6

What provides /usr/lib/qt3/bin/uic? UIC is dropping core.
by Bob Pearson 14 May '04

14 May '04

Environment: SuSE Linux Pro 9.0 with core dumps enabled. AMD Athlon 1.1GB I have updated to kde 3.2.2 from a SuSE mirror site (leo) and I am trying to build kmldonkey 0.10pre3 (http://www.kmldonkey.org/). I have successfully built it previously using kde 3.2.1. When running ./configure fr this program I get a core dump of /usr/lib/qt3/bin/uic caused by a SIGSEGV. It is trying to find out if qt designer plug-ins are available (they are). I have tried to use YaST2 to find out what provides /usr/lib/qt3/bin/uic and a "rpm -q -a --provides /usr/lib/qt3/bin/uic" and "rpm -q -a --provides /usr/bin/uic" yields no output. Am I doing something wrong? Has anyone gotten kmldonkey 0.10pre3 build under kde3.2.2 and SuSE 9.0? What provides /usr/lib/qt3/bin/uic? -------- qt3-3.3.2-3 qt3-non-mt-3.3.2-3 qt3-extensions-3.3.2-3 qt3-static-3.3.2-3 qt3-devel-tools-3.3.2-3 kdebase3-3.2.2-8 kdebase3-SuSE-9.0-68 kdebase3-devel-3.2.2-8 kdebase3-extra-3.2.2-8 kdelibs3-3.2.2-2 kdelibs3-devel-3.2.2-2 kdeutils3-devel-3.2.2-2 kdeutils3-extra-3.2.2-2 -------- Thanks. -- _/_/_/ Bob Pearson gottadoit(a)mailsnare.net _/_/_/ "Struggle, and you shall live".

3 3

Konqueror HTML trouble
by Luca Pellegrini 14 May '04

14 May '04

Dear all, Konqueror has suddenly stopped displaying web pages correctly. It shows the HTML source instead. If I look in the View menu to try and reset ViewMode to KHTML, Viewmode is not there! The EditFileType under Edit Menu is dimmed. When I use Konqueror as file manager though, ViewMode comes back. If I login as root, Konqueror displays web pages just fine. Has someone come across this before? Apologies if it's a trivial problem, I'm new to Linux/KDE. I'n running KDE 3.1.4 and Suse v9.0. Thank you for the help, Luca ************************************************************************* Luca Pellegrini tel:+44-1223-766029 (office) Biochemistry Dept 027 (lab) Tennis Court Rd fax:+44-1223-766002 Cambridge University e-mail: luca(a)cryst.bioc.cam.ac.uk Cambridge CB2 1GA - UK *************************************************************************

1 0