June 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] acpid requires systemd?
by Felix Miata 25 Apr '24

25 Apr '24

Can this be true? If so, why? Zypper won't let me upgrade acpid without breakage unless systemd is installed too. I have systemd locked out, as I'd rather test things I can understand in Factory, not major overhaul stuff. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

Re: [opensuse-factory] repository priorities with Tumbleweed
by Thomas Langkamp 16 Jul '15

16 Jul '15

> No, please don't confuse people, if you add more repos than just > Tumbleweed you really had better know what you are doing or bad things > can, and will, happen :) I understand. I just would like to add the following to http://en.opensuse.org/Portal:Tumbleweed - between ## is the new stuff: "The only supported method of repo use for Tumbleweed is to have only the main repos (Oss, Non-oss, and Update) and the Tumbleweed repo active. ## If you use more repositorys you have to know how repo-priorities work, but even then Tumblweed does NOT support this ## " It would also be good to move this information to "Special concerns" and to move the whole "Special concerns"-section up. For example "Special Concerns Virtual Machines ... Third Party Drivers ... ## Non-Standard Repos: Only use Oss, Non-oss, and Update combined with the Tumbleweed-Standard repo. Everything else is not supported and might break the system ## " >You do know the legal reasons behind why packman is there, right? Yes. Then I do not whish you personaly to support Packman with TW - I understand now that this is not possible from your perspectivg. But...as the OS community discusses right now if/how to strengthen Tumbleweed... one way would be, that Packman+TW would be supported BY Packman. So I will ask the Packman-guys to do that... I hope this is possible for them. Without Packman Tumbleweed is so ... "anti-multimedia" ;) thanks anyway :D -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 18

[opensuse-factory] Export broken for KinfoCenter
by Roger Luedecke 30 Jan '15

30 Jan '15

Export button is greyed out no matter what. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Package - libhal1-flash (re-enabling Flash-Player DRM content on Linux)
by Christopher Horler 13 Sep '14

13 Sep '14

Good afternoon! I've written and packaged a compatibility library for flash to enable playback of DRM content (this removes the dependency on the HAL package). I'd like to know what steps I can take to have the package considered for inclusion in openSUSE 12.3 and 13.1. Can I submit the package to devel:openSUSE:Factory, or is there another action I should be taking? Details of the bug and links to upstream are here (please briefly review): https://bugzilla.novell.com/show_bug.cgi?id=768562#c19 OBS location: https://build.opensuse.org/package/show?package=hal-flash&project=home%3Ach… I will maintain the package until such time that HTML5 Video content is a viable alternative or the Flash plugin is completely withdrawn. RPMs, debs... are all available on the build service. Three noteworthy points: - package naming (libhal1-flash) doesn't 100% align with the Shared Library Policy (I've suffixed -flash to make clear this is not a fully functional HAL layer and also to avoid naming conflicts as some distros seem to have a shared library package already named libhal1). - The packages depends on dbus and udisks. It seems to work find when udisks is launched on demand (as for openSUSE 12.3) - The flash-player package could have some kind of RPM dependency on this package to assist the user when looking in YaST (Install / Remove Software) / Package Manager. Chris -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] source_validator error: signature does not validate
by Kyrill Detinov 25 Aug '14

25 Aug '14

Hello. I can't build a package. Service source_validator failed. % osc build Run source service: /usr/lib/obs/service/format_spec_file --outdir /tmp/tmpVbBhay Run source service: /usr/lib/obs/service/source_validator --outdir /tmp/tmpIQYU6i /home/kent/rpmbuild/projects/M17N/i18nspector/i18nspector.keyring gpg: enabled debug flags: memstat gpg: keyring `/tmp/check_if_valid_source_dir-NL8Ezs/.checkifvalidsourcedir-gpg-keyring' created gpg: Oops: keyid_from_fingerprint: no pubkey gpg: Oops: keyid_from_fingerprint: no pubkey gpg: key 00000000 occurs more than once in the trustdb gpg: key 015475F5: public key "Jakub Wilk <jwilk(a)jwilk.net>" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) random usage: poolsize=600 mixed=0 polls=0/0 added=0/0 outmix=0 getlvl1=0/0 getlvl2=0/0 secmem usage: 0/32768 bytes in 0 blocks gpg: enabled debug flags: memstat gpg: Signature made Mon Jun 24 22:36:51 2013 MSK using RSA key ID 015475F5 gpg: Oops: keyid_from_fingerprint: no pubkey gpg: Oops: keyid_from_fingerprint: no pubkey gpg: key 00000000 occurs more than once in the trustdb gpg: Good signature from "Jakub Wilk <jwilk(a)jwilk.net>" gpg: aka "Jakub Wilk <jwilk(a)debian.org>" gpg: aka "Jakub Wilk <ubanus(a)users.sf.net>" random usage: poolsize=600 mixed=0 polls=0/0 added=0/0 outmix=0 getlvl1=0/0 getlvl2=0/0 secmem usage: 0/32768 bytes in 0 blocks (E) signature /home/kent/rpmbuild/projects/M17N/i18nspector/i18nspector-0.11.1.tar.gz.asc does not validate Aborting: service call failed: /usr/lib/obs/service/source_validator --outdir /tmp/tmpIQYU6i Source service run failed! As far as I can see, the signature is good. This also happens with another package (graphics/icoutils). What is the problem? -- WBR Kyrill

2 5

[opensuse-factory] YaST2 "install/remove" doesn't display solver diagram
by Kyrill Detinov 13 Jan '14

13 Jan '14

Hello. There is a regression in YaST2 *Qt* "install/remove software" module. It doesn't show solver diagram. First, no dependencies on libqdialogsolver. Second, installed libqdialogsolver doesn't help. Reported ages ago. And confirmed. All the info is provided. https://bugzilla.novell.com/show_bug.cgi?id=785431 WBR Kyrill

3 3

Re: [opensuse-factory] Nothing provides /usr/bin/php5
by Sascha Peilicke 11 Jan '14

11 Jan '14

On 12/01/2011 11:44 AM, Kyrill Detinov wrote: > > Hello. > > We have one package affected in standard repo: leechcraft-eiskaltdcpp. > The program itself doesn't require php5. But the package includes > example scripts with shebang '!/usr/bin/php5'. So the package isn't > installable. > > Also I see the same problem with pgfouine from Contrib (written in > PHP) and eiskaltdcpp from filesharing repo. Maybe more in third-party > repositories. > > Can we have symlink /usr/bin/php -> php5 in php5 package? Or affected > packages should be fixed? > Please file a bug against php5 and assign to Cristian Rodríguez. -- Viele Grüße, Sascha -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

Re: [opensuse-factory] SOLVED: postfix does not run
by Christian Boltz 06 Nov '13

06 Nov '13

Hello, Am Freitag, 22. März 2013 schrieb Patrick Shanahan: > /etc/postfix/main.cf had @_some-parameter_@ setting for every > "xxxxxxx_directory =" line. > > After correcting "xxxxxxxx_directory =" settings per my Tumbleweed > machine, postfix appears working correctly. > > This mess probably occurred on installing/upgrading postfix: > postfix-2.9.6-2.1.x86_64 Sun Mar 10 11:14:39 2013 > but the rpm main.cf does not contain "@.............@". This sounds like https://bugzilla.novell.com/show_bug.cgi?id=796162 which should be fixed since some time. I'd guess some older postfix package broke your main.cf. Nevertheless, if you want to be really sure, uninstall postfix, move away /etc/postfix and re-install the postfix package. Regards, Christian Boltz -- Argh, ich wollte heute doch gar nicht mehr siggen! [Michael Hoffmann in dag°] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Warning: new systemd version landing in Factory
by Frederic Crozat 20 Sep '13

20 Sep '13

Hi all, systemd v202 should be landed in Factory soon. It contains a lot of changes (and bug fixes) compared to v195 we had in 12.3, like (this is an extract from the .changes I wrote): + udev now supports different naming policies for network interface for predictable names (this one is disabled by /usr/lib/tmpfiles.d/network.conf until network team had a chance to look at it and test it). This should be enabled by default in Factory soon (see http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfac… ) This can be also be turned off with kernel command line switch: net.ifnames=0 (when the tmpfiles.d is removed in the near future) + udev gained support for loading additional device properties from an indexed database. %udev_hwdb_update macro should be used by packages adding entries to this database. + Journal gained support for "Message Catalog", indexed database to link up additional information with journal entries. %journal_catalog_update macro should be used by packages adding %entries to this database. + New rpm macros has been added: %udev_rules_update(), %_udevhwdbdir, %_udevrulesdir, %_journalcatalogdir, %_tmpfilesdir, %_sysctldir. + "age" field for tmpfiles entries can be set to 0, forcing removal of files matching this entry. + coredumpctl gained "gdb" verb to invoke gdb on selected coredump. + In service files, %U can be used for configured user name of the service. + nspawn can be invoked without a controlling TTY. + systemd and nspawn can accept socket file descriptors when started for socket activation. This allow socket activated nspawn containers. + logind can now automatically suspend/hibernate/shutdown system on idle. + ConditionACPower can be used in unit file to detect if AC power source is connected or if system is on battery power. + EnvironmentFile= in unit files supports file globbing. + Behaviour of PrivateTmp=, ReadWriteDirectories=, ReadOnlyDirectories= and InaccessibleDirectories= has changed. The private /tmp and /var/tmp directories are now shared by all processes of a service (which means ExecStartPre= may now leave data in /tmp that ExecStart= of the same service can still access). When a service is stopped its temporary directories are immediately deleted (normal clean-up with tmpfiles is still done in addition to this though). + Resource limits (as exposed by cgroup controlers) can be controlled dynamically at runtime for all units, using "systemctl set-cgroup-attr foobar.server cgroup.attribute value". Those settings are stored persistenly on disk. + systemd-vconsole-setup will now copy all fonts settings to all allocated VTs. + timedated now exposes CanNTP property to indicate if a local NTP service is available. + pstore file system is mounted by default, if available. + SMACK policies are loaded at early boot, if available. + Timer units now support calendar time events. + systemd-detect-virt detect xen PVs. + Some distributions specific LSB targets has been dropped: $x-display-manager, $mail-transfer-agent, $mail-transport-agent, $mail-transfer-agent, $smtp, $null. As well mail-transfer-agent.target and syslog.target has been removed. + systemd-journal-gatewayd gained SSL support and now runs as unprivileged user/group "systemd-journal-gateway:systemd-journal-gateway" + systemd-analyze will read, when available, boot time performance from EFI variable from boot loader supporting it. + A new generator for automatically mounting EFI System Partition (ESP) to /boot (if empty and no other file system has been configured in fstab for it). + logind will now send out PrepareForSleep(false) out unconditionally, after coming back from suspend. + tmpfiles gained a new "X" line type, that allows configuration of files and directories (with wildcards) that shall be excluded from automatic cleanup ("aging"). + udev default rules set the device node permissions now only at "add" events, and do not change them any longer with a later "change" event. + A new bootctl tool has been added that is an interface for certain EFI boot loader operations. + A new tool kernel-install has been added to install kernel images according to Boot Loader Specification. + A new tool systemd-activate can be used to test socket activation. + A new group "systemd-journal" is now owning journal files, replacing "adm" group. + journalctl gained "--reverse" to show output in reverse order, "--pager-end" to jump at the end of the journal in the pager (only less is supported) and "--user-unit" to filter for user units. + New unit files has been addedto ease for systemd usage in initrd. + "systemctl start" now supports "--irreversible" to queue operations which can be reserved. It is now used to make shutdown requests more robust. + Auke Kok's bootchart has been merged and relicensed to LGPLv2.1+. + nss-myhostname has been merged in systemd codebase. + some defaults sysctl values are now set by default: the safe sysrq options are turned on, IP route verification is turned on, and source routing disabled. The recently added hardlink and softlink protection of the kernel is turned on. + journald will now explicitly flush journal files to disk at the latest 5 min after each write and will mark file offline until next read. This should increase reliability in case of crash. + remote-fs-setup.target target has been added to pull in specific services when at least one remote file system is to be mounted. + timers.target and paths.target have been added as canonical targets to pull user timer and path units, similar to sockets.targets. + udev daemon now sets default number of worker processes in parallel based on number of CPUs instead of RAM. + Most unit file settings which takes likst of items can now be reset by assigning empty string to them, using drop-in. + Add support for drop-in configuration file for units. + Most unit file settings which takes likst of items can now be reset by assigning empty string to them, using drop-in. + 'hostnamectl set-hostname' allows setting FQDN hostnames. + fractional time intervals are now parsed properly. + localectl can list available X11 keymaps. + systemd-analyze dot can filter for specific units and has been rewritten in C. + systemctl gained "list-dependencies" command. + Inhibitors are now honored no only in GNOME. + 'systemctl list-jobs' got some polishing. '--type=' argument may now be passed more than once. 'systemctl list-sockets' has been added. + systemd gained a new unit 'systemd-static-nodes.service' that generates static device nodes earlier during boot, and can run in conjunction with udev. + systemd-nspawn now places all containers in the new /machine top-level cgroup directory in the name=systemd hierarchy. + bootchart can now store its data in the journal. + journactl can now take multiple --unit= and --user-unit= switches. + The cryptsetup logic now understands the "luks.key=" kernel command line switch. If a configured key file is missing, it will fallback to prompting the user. -- Frederic Crozat <fcrozat(a)suse.com> SUSE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 31

[opensuse-factory] /boot partition is too small when you selected "Create LVM Based Proposal"in "Suggested Partitioning" on installer .
by 1xx 15 Sep '13

15 Sep '13

Hi all . When I selected "Create LVM Based Proposal" in "Suggested Partitioning" on installer, Installer suggested "Create boot volume /dev/sda1 (156.88 MB)" . But it is too small for for updating the kernel . The present state is as follows. Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 154691 108188 38516 74% /boot rpm -qa 'kernel-desktop' kernel-desktop-3.7.10-1.16.1.x86_64 kernel-desktop-3.7.10-1.11.1.x86_64 Disk storage capacity runs short in update of the next kernel . In the past, disk storage capacity actually ran short by update of the kernel . I think that the /boot partition should be more than 256 M byte required. (ex: 1 G byte) I wrote https://bugzilla.novell.com/show_bug.cgi?id=826981 . I want you to tell your opinions . -- 1xx <ItSANgo(a)gmail.com> <https://twitter.com/ItSANgo> <http://d.hatena.ne.jp/Itisango/> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

23 47

[opensuse-factory] openqa/factory lamp testing question
by doiggl＠velocitynet.com.au 19 Aug '13

19 Aug '13

Hello, I have a openqa/factory question:Perhaps for Bernhard. Can a test LAMP[1] be included in the openqa tests,to test the lamp software stack works with some software which uses all these components, see example see[2], The install output listed at[3] I have not tested the configuration settings yet as I have not been able to get apache2 part going yet. Thanks Glenn [1] definition Linux (operating system), Apache HTTP Server, MySQL (database software), and PHP, Perl or Python http://en.wikipedia.org/wiki/LAMP_%28software_bundle%29 [2] LAMP_setup and software setup - http://en.opensuse.org/SDB:LAMP_setup - http://en.opensuse.org/Cacti changed/updated instructions to suit newer version of cacti. zypper ar http://download.opensuse.org/repositories/server:/monitoring/openSUSE_Facto… server:monitoring zypper in cacti cacti-plugin-autom8 cacti-plugin-boost cacti-plugin-clog cacti-plugin-cycle cacti-plugin-discovery cacti-plugin-docs cacti-plugin-flowview cacti-plugin-hostinfo cacti-plugin-loginmod cacti-plugin-mactrack cacti-plugin-monitor cacti-plugin-npc cacti-plugin-ntop cacti-plugin-realtime cacti-plugin-routerconfigs cacti-plugin-settings cacti-plugin-ssl cacti-plugin-syslog cacti-plugin-thold cacti-plugin-tools cacti-plugin-update cacti-plugin-weathermap [3] install output Loading repository data.. Reading installed packages.. Resolving package dependencies.. The following NEW packages are going to be installed: cacti cacti-plugin-autom8 cacti-plugin-boost cacti-plugin-clog cacti-plugin-cycle cacti-plugin-discovery cacti-plugin-docs cacti-plugin-flowview cacti-plugin-hostinfo cacti-plugin-loginmod cacti-plugin-mactrack cacti-plugin-monitor cacti-plugin-npc cacti-plugin-ntop cacti-plugin-realtime cacti-plugin-routerconfigs cacti-plugin-settings cacti-plugin-ssl cacti-plugin-syslog cacti-plugin-thold cacti-plugin-tools cacti-plugin-update 22 new packages to install. Overall download size: 7.7 MiB. After the operation, additional 22.5 MiB will be used. Continue? [y/n/?] (y): Retrieving package cacti-0.8.8a-14.2.noarch Installing: cacti-plugin-boost-5.1-2.3 ............................................................[done] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 14

[opensuse-factory] On kmod-compat replacing m-i-t
by Jan Engelhardt 08 Aug '13

08 Aug '13

Currently, the only package that still blocks the removal of module-init-tools from a system is the kernel rpm package, with an express dependency "module-init-tools >= 3.4". What is so particular about m-i-t 3.4? Can it be replaced by modutils, or do we need to add some virtual Provides: mitmagic34 to both module-init-tools.spec and kmod-compat.spec? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 8

[opensuse-factory] Tumbleweed update today breaks vlc from packman
by Patrick Shanahan 30 Jul '13

30 Jul '13

09:58 Crash: ~ > vlc VLC media player 2.0.6 Twoflower (revision 2.0.6-0-gbe9623c) Segmentation fault 09:58 Crash: ~ > rpm -q --last vlc vlc-2.0.6-116.4.x86_64 Thu 25 Apr 2013 09:50:02 AM EDT ?? tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 30

Re: [opensuse-factory] 12.3 RC1 R128 trouble (was: ...install mysteries)
by Felix Miata 12 Jul '13

12 Jul '13

On 2013-02-18 16:40 (GMT+0100) Roger Oberholtzer composed: > I am installing 12.3 RC1 on a machine that happily runs earlier versions > of openSUSE. The graphics is, admittedly, an older ATI Rage XL (MACH64). > It runs as a server, and this is on the MB. It is usually only seen > during install. > The install was a bit of a PITA because, no matter what display I used, > I could not get a graphic install to work. I tried setting various > resolutions and even 'No KMS' in the initial install screen. The screen > would go black, and I could do nothing. No virtual terminals. Nothing. > Eventually I had settle for the text install. Using 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage Mobility M3 AGP 2x (rev 02) here. 11.4 works OK. I installed HTTP started by Grub using latest factory-snapshot with nomodeset on cmdline. Graphical install worked fine, though slow with only 384M RAM, but resulting X is unusable. The left half of the screen is fine, but the right side is a mess, as if there were some kind of buffer misalignment repeating portions and omitting others. Using nomodeset produces mostly black screens with colored lines in various places at various times in attempting to start the login manager, and kills keyboard. Bunch of Xorg.0.log files: http://fm.no-ip.com/Tmp/Linux/Xorg/os123r128/ Anyone looked for a match to any of these upstream R128 bugs? http://tinyurl.com/bz5lfmv I've commented in the last bug in that list. Exiting X makes the system unresponsive to keyboard and mostly empties the screen to black. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Milestone #2 and nouveau driver
by Basil Chupin 11 Jul '13

11 Jul '13

What incantations does one need to use and how many times does one need to wave a chicken foot while doing so to get rid of the nouveau driver in Milestone #2, please? :-) I want to install nVidia driver 319.23 but it won't "go in" because the nouveau driver refuses to be dismissed even though I have removed it using YaST and it is blacklisted in all the right places. :-( BC -- Using openSUSE 12.3, KDE 4.10.4 & kernel 3.9.6-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 23

[opensuse-factory] automounting USB devices with xfce on 12.3
by Karl Eichwalder 05 Jul '13

05 Jul '13

I usually update my system with the traditional yast method. Now on 12.3, xfce no longer automounts devices in my USB card-reader. I think it used to work on 12.2, and it definitely work on a 12.3 installation from scratch. How can I debug this on my updated 12.3 system? Do others suffer from the same? If yse, I'd create a bug. -- Karl Eichwalder SUSE LINUX Products GmbH R&D / Documentation Maxfeldstraße 5 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 9

[opensuse-factory] Why systemd over upstart?
by Linda Walsh 01 Jul '13

01 Jul '13

Was just looking for performance articles on boot and ran into upstart -- it seems somewhat similar to systemd in that it is a replacement -- but it's design was for performance and reliability -- things that systemd doesn't seem to emphasize. Also its well documented (http://upstart.ubuntu.com/cookbook/ also in the form of a 183p PDF). and has been in use for a few years -- so it's not alpha quality like systemd. Even fedora has used it -- though I guess they are switching to systemd? I just couldn't help but notice the large amound of examples and docs -- as well as a service scripting language -- something systemd fails hard on. So why go for an unfinished alpha over upstart? Advantages? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 15

[opensuse-factory] What's happened with ImageMagick (XPM issue)?
by Kyrill Detinov 30 Jun '13

30 Jun '13

Hello. I see, ImageMagick doesn't recognize XPM files now. % identify logo_48.xpm identify: unrecognized color `None' @ warning/color.c/GetColorCompliance/947. identify: corrupt image `logo_48.xpm' @ error/xpm.c/ReadXPMImage/391. AFAIK color 'None' (transparent) is valid. Reference: http://ftp.x.org/contrib/libraries/xpm-FAQ.html http://www.fileformat.info/format/xpm/egff.htm The file: http://susepaste.org/view/raw/84491063 -- WBR Kyrill

2 3

[opensuse-factory] List of Failures in staging projects
by Stephan Kulow 30 Jun '13

30 Jun '13

Hi, In case someone is bored today, here are the list of build failures ;) openSUSE:Factory:Staging:Gcc48 capi4hylafax ccache gjdoc gnome-session go go-Go-OpenGL inkscape libgcj47 libopensync libopensync-plugin-opie libsatsolver lighttpd lilo mISDNuser mozc openttd-opengfx perf ppl-testsuite python3-base samba strigi uwsgi v8 xplatproviders openSUSE:Factory:Staging:perl518 ack apache2-mod_perl apparmor automake-testsuite collectd devscripts hugin kdeaddons3 kdebase3 kdebindings3 libcamgm lighttpd perf perl-MIME-tools perl-PDF-API2 perl-Template-Toolkit perl-Tk po4a rsnapshot samba squid stellarium wireshark xen Please note that would like to go forward with these projects, so I really need people to look at their or other packages. Some packages are of course more important than others, but e.g. samba is on both lists ;( Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 19

[opensuse-factory] Booting problems with current factory
by Stephan Kulow 29 Jun '13

29 Jun '13

Hi, It looks like I just broke my laptop by updating to factory, I can't get past the initrd with something that sounds like broken storage setup in systemd/mkinitrd/udev. So I advise everyone not to update before I found out it was my fault :) Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

19 63

[opensuse-factory] Gala (Pantheon's Window Manager) Port to openSUSE and Libclutter
by Antoine Saroufim 29 Jun '13

29 Jun '13

Good Day, I'm attempting to port Pantheon, the Elementary Desktop Environment, to openSUSE. With the correct dependencies installed, the process is relatively easy. Alien can make .RPM packages out pf most .deb files. I managed to get most of the desktop working as it would work on Ubuntu 13.04. However, Gala requires a different version of libclutter that conflicts with the one provided in the repositories of openSUSE 12.3. Gala would be extremely choppy and almost unusable if Elementary's Libclutter isn't installed, and if it is installed, GDM and Lightdm-gtk-greeter wouldn't be able to run. In short, Gala needs a libclutter version that would conflict with openSUSE 12.3. Coding Gala to use a newer version of Libclutter is beyond my skill and so is making Gala use an exclusive version of the library. Would anyone be interested in porting Gala to openSUSE 12.3? Sincerely, Antoine Saroufim -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] udev directory became symlink - not
by Jan Engelhardt 28 Jun '13

28 Jun '13

On Wednesday 2013-06-26 09:18, coolo(a)suse.com wrote: > >State of submit-request #180899 was changed by coolo: > review -> declined >Comment: > found conflict of bcache-tools-0.1.g45-1.1.x86_64 with udev-204-6.1.x86_64: > - /lib/udev [mode mismatch: d755 root:root, g l777 root:root] Now, I am looking at my Factory VM and find that (prior to installation of any bcache-tools) /lib/udev is still a directory and not a symlink. Frederic, please note that rpm is still incapable of replacing a non-symlink object with a symlink object. This now means my /lib/udev is empty rather than a symlink :-/ Not that *I* am expecting breakage, but it might just be there, somewhere. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 8

[opensuse-factory] drop of ldapsmb for post openSUSE 12.3
by Lars Müller 28 Jun '13

28 Jun '13

Hi, we like to drop ldapsmb from any openSUSE product newer than 12.3. If you still use it and believe it still has any value and not only defects it's up to you to speak up now. Else we'll remove it from the Samba spec file for all post-12.3 in a week from now. Cheers, Lars -- Lars Müller [ˈlaː(r)z ˈmʏlɐ] Samba Team + SUSE Labs SUSE Linux, Maxfeldstraße 5, 90409 Nürnberg, Germany

2 2

[opensuse-factory] GNOME 3.9.3 for Factory?
by Dominique Leuenberger a.k.a. Dimstar 28 Jun '13

28 Jun '13

Hi all, As you're all aware, the plan for openSUSE 13.1 is to include GNOME 3.10 (12.3 was shipped with GNOME 3.6, with 3.8 as 'addon repo'). Now, of course, 3.10 is not going to be released before September... but we have GNOME 3.9.3 ready in GNOME:Factory and I for one run this on my machine with limited issues. Are you all ready and willing to get the new 3.9.x dumped upon you? Due to the early dev state of it, there are surely some things here and there that still need fixing, but the soon we can get 'users' on the platform, the better the chances to get some issues solved here and there. So the short question is really: Shall we submit GNOME 3.9.x to Factory? If we do this now, then I'd say we have a perfect chance that users coming to oSC13 and running Factory have a chance to have this usable (or not :) ). There is currently only 'one blocker' on my radar: gnome-control-center segfaults on startup (due to one of our own patches). Cheers, Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 13

[opensuse-factory] python ssl module
by Guido Berhoerster 28 Jun '13

28 Jun '13

Why is the python ssl module not provided by the python module any more? It seems to have vanished after a recent version upgrade and there isn't even an explanation in the changelog. This currently causes build failures for offlineimap. -- Guido Berhoerster -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7

[opensuse-factory] LFS_CFLAGS injected into optflags
by Dominique Leuenberger a.k.a. Dimstar 28 Jun '13

28 Jun '13

Quoting crrodriguez(a)opensuse.org: > home:elvigia:branches:GNOME:Factory/loudmouth -> GNOME:Factory/loudmouth > > > https://build.opensuse.org/request/show/181220 > > Description: - build with LFS_CFLAGS in 32 bit archs Christian, Can you please, for general information on -factory, explain as to the 'why' you submit all those? I see many of them and of course also get the point.. but if they are that important: why not for 64bit systems? On all my systems I checked so far, this CFLAG is simply a waste and useless: getconf -a | grep -e "LFS.*_CFLAGS" LFS_CFLAGS LFS64_CFLAGS -D_LARGEFILE64_SOURCE => so LFS_CFLAGS is empty... why would I care to 'inject' it? If it's that important: why don't we have it in optflags in first place? I really don't like those additions without any explanation at ANY moment, including a reference what it does, how can the effects be tested, how can be tested if it's still needed.. Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 6

[opensuse-factory] 13.1 Milestone 2 and Skype -- problem
by Sid Boyce 28 Jun '13

28 Jun '13

I have 3 x86_64 boxes where skype used to work but since upgrading from Milestone 1 to Milestone 2 I only get a buzzing sound like 50Hz hum. On the same network I have Kubuntu 13.04 boxes on which skype works properly. If I start skype (4.2.0.11) test or someone tries to call me on the M2 boxes there is just this buzzing sound that continues until I close skype. It's a standard sound setup with pulseaudio. All other apps work normally, playing flash movies, SDR radio, etc., no problem. I wonder if anyone else has noticed the same problem or even has it working properly. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] New Package for factory: nrun
by Timo Benk 26 Jun '13

26 Jun '13

Hi, i am about to create the submit request to factory for devel:languages:perl/nrun. nrun runs a single command or script on a multiple of target servers synchronously much like dsh or pdsh do but it is written in perl which makes it easier to extend for special remote access solutions. i originally wrote the tool for the solaris operating system but i think it may be useful on linux too. from the description: nrun will run a single command or script on a multiple of target servers synchronously. ncopy will copy a file or directory to multiple target servers. the underlying remote access mechanism is exchangeable. as of now, ssh, nsh, rsh and local execution modes are implemented. the return code and all command output will be logged. Comments, feedback and patches are very welcome. greetings, -timo -- Timo Benk Linux / Unix Consultant & Trainer Tel.: +49-178-8066638 Mail: benk(a)b1-systems.de B1 Systems GmbH Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] maintenance question: what if a bugfix needs a new package?
by Marguerite Su 25 Jun '13

25 Jun '13

Hi, Ben & listmates, Here's the case I ran into (bnc#821877): Our unzip can't detect CJK charsets, so it unzips them into folders like "口口口", which can't be opened by file managers and impossible to delete by rm command. So most of the users will consider this as a blocker. The cause of this problem is that we use librcc to detect charset in zip formats(librcc use dynamic engines for this task, so it masks other functions like iconv on purpose, which means you can't apply _any_ further chaset patch besides librcc). But our librcc is built without libguess support, which is responsible for CJK charset detection. Well, although libguess has been landed in devel:libraries:c_c++ for a while, it didn't get submitted into Factory, no need to mention released versions. For new version like 13.1, the fix will be easy: submit libguess, fix librcc, done. But for maintenance, I can fix librcc, then it requires libguess. Our maintenance policy doesn't seem to allow brand _new_ packages. Any exceptions? Greetings Marguerite -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] new home for mediastreamer2
by Mariusz Fik 24 Jun '13

24 Jun '13

Hi, I'm working on update for linphone. So far I updated libosip2[1], libeXosip2[2] and ortp[3]. When all accepted I want to update mediastreamer2 and I want to move it from current devel project d:l:c_c++ to network:telephony. I saw K:D:F has mediastreamer2 _link to build kopete against it and nothing more. So fixing _link after propsed change will be trivial ;) Any objections about changing mediastreamer devel prj? [1] - https://build.opensuse.org/request/show/180740 [2] - https://build.opensuse.org/request/show/180741 [3] - https://build.opensuse.org/request/show/180739 -- Pozdrawiam / Best regards, Mariusz Fik openSUSE Community Member GPG: 5FCE 7241 B3B9 32FD 455B C30E 42D6 6C88 9E83 7C3D

3 3

[opensuse-factory] Yast Expert Partitioner crashes when selecting Device and Mount Graph icons
by Roman Bysh 24 Jun '13

24 Jun '13

Hello all, During the installation of M2 while editing a partition setup with the Yast Expert Partitioner. Clicking on the Device and Mount graph icons crashes Yast. Here is the link: https://bugzilla.novell.com/show_bug.cgi?id=825751 Cheers! Roman ------------------------------------------------------- openSUSE -- Get it! Discover it! Share it! ------------------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] snapper program -- does it work w/lvm?
by Linda Walsh 23 Jun '13

23 Jun '13

snapper claims to work with lvm but I have had any luck trying to create a config. last thing I tried was: # snapper -c home create-config -f "lvm(xfs)" /home Creating config failed (invalid filesystem type). # mount |grep /home /dev/HnS/Home on /home type xfs It's an xfs formatted filesystem on an lvm partition. lvm(xfs) is even given as an example... Ideas? or is it brtfs only? Thanks..... snapper 0.1.4 Welcome to openSUSE 13.1 "Dartmouth" Milestone 1 - Kernel \r (\l). -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 8

[opensuse-factory] Has anyone succeeded in getting apache2 version 2.4.4 installed and running successfully on opensuse factory ?
by doiggl＠velocitynet.com.au 22 Jun '13

22 Jun '13

Hello, Has anyone succeeded in getting apache2 version 2.4.4 installed and running successfully on opensuse factory ? If so, how was the install done and what configuration files changed, were firewall settings changed ? Thanks Glenn source: http://mirror.mel.bkb.net.au/pub/apache//httpd/httpd-2.4.4.tar.bz2 http://mirror.mel.bkb.net.au/pub/apache//httpd/httpd-2.4.4.tar.gz -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] Milestone2 with Ruby Yast
by Per Jessen 21 Jun '13

21 Jun '13

I've just reverted my test-system to Yhr, and ran a zypper dup. When I now try any of the modules, I am again immediately returned to the main menu. Running modules individually also just returns. >From trying to access "repositories" within yast: [Ruby] ycp/wfm.rb:85 Client call failed with private method `include' called for YCP:Module and backtrace ["/usr/share/YaST2/clients/repositories.rb:27:in `main'", "/usr/share/YaST2/clients/repositories.rb:1943:in `<top (required)>'", "/usr/lib64/ruby/vendor_ruby/2.0.0/ycp/wfm.rb:83:in `eval'", "/usr/lib64/ruby/vendor_ruby/2.0.0/ycp/wfm.rb:83:in `run_client'"] Calling "yast lan" directly: [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/PackageAI load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/PackageAI.rb:10:in `main' 2013-06-21 11:36:49 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/PackageAI' 2013-06-21 11:36:49 <3> chestnut(29510) [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/PackageSystem load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/PackageSystem.rb:18:in `main' 2013-06-21 11:36:49 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/PackageSystem' 2013-06-21 11:36:49 <3> chestnut(29510) [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/Package load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/Package.rb:80:in `main' 2013-06-21 11:36:49 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/Package' 2013-06-21 11:36:49 <3> chestnut(29510) [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/NetHwDetection load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/NetHwDetection.rb:17:in `main' 2013-06-21 11:36:49 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/NetHwDetection' 2013-06-21 11:36:49 <3> chestnut(29510) [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/DNS load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/DNS.rb:17:in `main' 2013-06-21 11:36:49 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/DNS' 2013-06-21 11:36:49 <3> chestnut(29510) [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/Host load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/Host.rb:14:in `main' 2013-06-21 11:36:49 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/Host' 2013-06-21 11:36:49 <3> chestnut(29510) [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/Routing load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/Routing.rb:13:in `main' 2013-06-21 11:36:49 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/Routing' 2013-06-21 11:36:50 <1> chestnut(29510) [Ruby] modules/Encoding.rb:47 list ["charmap=\"UTF-8\"", ""] 2013-06-21 11:36:50 <1> chestnut(29510) [Ruby] modules/Encoding.rb:51 list ["charmap=\"UTF-8\""] 2013-06-21 11:36:50 <1> chestnut(29510) [Ruby] modules/Encoding.rb:54 enc "UTF-8" 2013-06-21 11:36:50 <1> chestnut(29510) [Ruby] modules/Encoding.rb:56 enc UTF-8 2013-06-21 11:36:50 <1> chestnut(29510) [Ruby] modules/Encoding.rb:61 encoding UTF-8 2013-06-21 11:36:50 <1> chestnut(29510) [Ruby] modules/FileSystems.rb:1234 support $[`btrfs:true, `ext2:true, `ext3:true, `ext4:true, `jfs:false, `lvm:true, `ntfs:true, `raid:true, `reiser:true, `vfat:true, `xbootdisk:false, `xbootfat:false, `xfs:true, `xhibernate:true, `xxefi:false] 2013-06-21 11:36:50 <1> chestnut(29510) [Ruby] modules/Storage.rb:3425 SetPartMode CUSTOM 2013-06-21 11:36:50 <3> chestnut(29510) [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/LanItems load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/LanItems.rb:13:in `main' 2013-06-21 11:36:50 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/LanItems' 2013-06-21 11:36:50 <3> chestnut(29510) [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/LanUdevAuto load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/LanUdevAuto.rb:10:in `main' 2013-06-21 11:36:50 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/LanUdevAuto' 2013-06-21 11:36:50 <3> chestnut(29510) [Y2Ruby] binary/YRuby.cc(loadModule):148 Module /usr/share/YaST2/modules/Lan load failed:private method `include' called for YCP:Module at /usr/share/YaST2/modules/Lan.rb:37:in `main' 2013-06-21 11:36:50 <3> chestnut(29510) [Interpreter] ycp/i18n.rb:66 Ruby::loadModule() / Can't load ruby module '/usr/share/YaST2/modules/Lan' 2013-06-21 11:36:50 <3> chestnut(29510) [Ruby] ycp/wfm.rb:85 Client call failed with private method `include' called for YCP:Module and backtrace ["/usr/share/YaST2/clients/lan.rb:26:in `main'", "/usr/share/YaST2/clients/lan.rb:293:in `<top (required)>'", "/usr/lib64/ruby/vendor_ruby/2.0.0/ycp/wfm.rb:83:in `eval'", "/usr/lib64/ruby/vendor_ruby/2.0.0/ycp/wfm.rb:83:in `run_client'"] -- Per Jessen, Zürich (20.1°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Darktable upcoming changes
by toganm＠opensuse.org 21 Jun '13

21 Jun '13

Hi, This is an announcement for those of you using darktable from graphics repo or factory repo. There will be some changes in how darktable uses thumbnail cache files. If you encounter problems with this release please use bugzilla to report any findings. Because compression code is disabled previous cache may not work. Removing ~/.cache/darktable/mipmaps is necessary If you are not using graphics repo then you are not affected (yet). Factory repo takes time to get included but you can factory version from graphics. Factory submit is #180239 Thanks Togan Muftuoglu -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Poll about LXDE-E17 available through installer and on DVD
by Stathis Iosifidis (aka diamond_gr) 20 Jun '13

20 Jun '13

Hello mates, Few days ago, Softpedia had a blogpost [1] regarding an e-mail from Tomas Cech at our factory mailing list [2]. Tomas and Simon continue to maintain Enlightenment for openSUSE (check their TODO list at our Portal [3]). So we made a poll at connect to tell us you think about it. Here is the link: http://goo.gl/KYRak Deadline is on July 25th, right after the openSUSE conference [4]. Thank you for your help. Have a lot of phun, Stathis [1] http://news.softpedia.com/news/openSUSE-to-Drop-LXDE-in-Favor-of-E17-354437… [2] http://lists.opensuse.org/opensuse-factory/2013-05/msg00208.html [3] https://en.opensuse.org/Portal:Enlightenment [4] https://conference.opensuse.org/ -- http://about.me/iosifidis http://eiosifidis.blogspot.gr http://blogs.gnome.org/eiosifidis Great leaders don't tell you what to do... They show you how it's done. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 7

[opensuse-factory] Question about findutils-locate
by Tomáš Chvátal 20 Jun '13

20 Jun '13

Hello guys, as of now we have mlocate [1] package in factory do you think it would be wise to remove the findutils-locate as whole to only keep this implementation which is faster and more reliable around? When I checked other distros like fedora [2] or gentoo they both patch it out. Cheers Tom [1] https://build.opensuse.org/package/view_file?expand=1&file=mlocate.spec&pac… [2] http://pkgs.fedoraproject.org/cgit/findutils.git/tree/findutils-4.4.0-no-lo…

7 24

[opensuse-factory] openSUSE-13.1 Milestone2 with Ruby YaST
by Ladislav Slezak 19 Jun '13

19 Jun '13

Hi all, Long story short: Alternative Milestone 2 installation images with Ruby YaST created by the YCP Killer project are available here: http://download.opensuse.org/repositories/YaST:/Head:/ruby/images/iso/openS… (~3.8GB) http://download.opensuse.org/repositories/YaST:/Head:/ruby/images/iso/openS… (~860MB, only package subset, select "Minimal X" or "Textmode" software selection) And here is the full story: Introduction ------------ You might already know the YCP Killer project [1] by which we want to replace our specific YCP language used in YaST by Ruby. The transition to Ruby is automated, we created a translator from YCP to Ruby and improved the core YaST so it can run Ruby modules. Our goal is to switch all our YaST modules from YCP to Ruby in openSUSE-13.1. The most critical part of YaST is the installer which cannot be easily updated on already released media. Therefore we need broader testing before this switch to avoid installation failures on large scale. That's why we created alternative ISO images for installing openSUSE 13.1 Milestone 2 with YaST converted to Ruby. Downloads --------- We have two installation images with converted YaST installer, "fullDVD" which is basically the Milestone 2 DVD ISO and "miniDVD" which contains just a subset of packages needed for "Minimal X" installation (or "Minimal Text Mode", the other software selections will fail because of missing packages). "fullDVD" is recommened, but if your download speed is slow or you have a download limit then you can try the "miniDVD". (Note: we built the ISOs _after_ the official M2 images so there might be some small changes in package versions, the images are not 100% compatible with M2, but they are very close. So rather use the official M2 release for testing and reporting non-YaST issues.) The ISOs are available here: http://download.opensuse.org/repositories/YaST:/Head:/ruby/images/iso/openS… (~3.8GB) http://download.opensuse.org/repositories/YaST:/Head:/ruby/images/iso/openS… (~860MB) (We built only x86_64 images to save OBS resources, sorry, no other architectures.) Installation ------------ You need to manually add "insecure=1" boot option because the ISOs are not signed by the official openSUSE GPG key. You will also need to accept the OBS YaST:Head:ruby GPG key when adding the installation repository during installation. Alternatively to full installation you can switch to YaST Ruby later after installing the official Milestone 2. As root run this: # add YaST:Head:ruby zypper ar -f http://download.opensuse.org/repositories/YaST:/Head:/ruby/openSUSE_Factory/ YaST:Head:ruby # replace all YaST packages, use distribution upgrade to allow vendor change zypper dup --from YaST:Head:ruby Then you can test Ruby YaST in installed system, use it the same way as the classic YCP YaST. Testing ------- We already did some minimal testing to ensure the image installs, but we need more intensive testing. So use the images as usual openSUSE installation images, try configuring various system properties, try different hardware/software setups... We only changed the YaST implementation language, so the look&feel of YaST is (or actually must be) the same as in the classic YCP YaST. The automatic translation to Ruby also means that a bug in YCP YaST will be also present in Ruby YaST (bug compatibility). Known bugs ----------- - There is a segfault printed at the console at the end of the first installation stage just before reboot, but it happens at the very end when YaST is exiting and should be harmless. - When using non-English language some texts are not translated (button labels, messages...). - Installation from images is not supported (not available on the medium), the installation proposal will just inform about this. - The ncurses control center in installed system starts for very long time (~2 minutes) For other bugs see the GitHub link in the next section. Bug/Success Reporting ---------------------- We are focused on bugs in YCP to Ruby translation, if you find a bug which is also present in YCP YaST in the official M2 then use the usual bug reporting via bugzilla. If you are unsure you can try the same in the official M2 or you can report it anyway, we will check it. (Of course, it would be nice if you could do that so we are focused on real bug fixing.) Also report slowdowns or other different behavior not observed in original YCP YaST. For reporting bugs use GitHub issues (GitHub account needed): https://github.com/yast/ycp-killer/issues It would be also great to get some positive feedback to know how many people tested our installer and know what has been already tested and works. Just send a short summary what did you test (which module(s), what did you configure...). Feedback -------- If you have any questions or you want to report a success just reply here, write to yast-devel(a)opensuse.org or connect to #yast freenode IRC channel. Have a lot of fun! Ladislav [1] https://github.com/yast/ycp-killer -- Ladislav Slezák Appliance department / YaST Developer Lihovarská 1060/12 190 00 Prague 9 / Czech Republic tel: +420 284 028 960 lslezak(a)suse.com SUSE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

14 31

[opensuse-factory] Non-booting system after zypper dup - Factory
by Sid Boyce 19 Jun '13

19 Jun '13

After a factory update the system would not boot. I built a new system from the 13.1 Milestone 2 DVD. After changing to factory repos and using zypper dup, the system no longer boots. The last message seen on console was "udev creating device nodes". I don't know if this is related to the other problems I see on the list due to fstab's entries using /dev/disk/by-id The following message repeated on tty1 and that's where it's stuck:- Welcome to emergency mode! After logging in, type "journalctl -xb" to view system logs, "systemctl reboot" to reboot, "systemctl default" to try again to boot into default mode. ------------------------------------------------------------------------------------------------------------- No login prompt is ever reached. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] gpg signature check in bootstrap packages
by Jan Engelhardt 19 Jun '13

19 Jun '13

On Monday 2013-06-17 15:25, coolo(a)suse.com/Hermes wrote: > https://build.opensuse.org/request/show/179324 > Description: - avoid gpg-offline in bootstrap packages How important is the presence and/or absence of the signature check? There are more bootstrap packages that have a BuildRequires: gpg-offline. My recommendation would be, as I have already done with one bootstrapish package, to remove BuildRequires: gpg-offline and instead slurp gpg-offline into the buildchroot by way of a prjconf Support: and/or through ~/.oscrc extra-pkgs. (The downside with .oscrc is that it bugs you whenever there is no gpg-offline, like when building locally for other distros.) Sounds like an idea? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] Status: Distribution
by Stephan Kulow 19 Jun '13

19 Jun '13

Hi, After M2 release we have several projects running at the same time: - reducing the bootstap cycle in openSUSE:Factory (removing gpg-offline out of it is one action item) - perl 5.18 update shows 38 build failures at the moment: openSUSE:Factory:Staging:perl518 - gcc 4.8 switch shows 27 build failures openSUSE:Factory:Staging:Gcc48 - python3 is split it into its own devel project - KDE 4.11 beta is prepared in K:D:F - Jan is preparing a switch to db-60 - tons of things I forgot to mention :) Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 10

[opensuse-factory] apache2 [vers 2.4.4x] setup question
by doiggl＠velocitynet.com.au 19 Jun '13

19 Jun '13

Hello, What am I missing in my settings or setup for apache2 ? Using Apache/2.4.4 Thanks Glenn Errors on http://127.0.0.1/ shown at [1]. Log information included as well [2] rpms installed listing [3] using as a guide [3] Steps done: # rcapache2 start redirecting to systemctl start apache2 - browse to http://127.0.0.1/ shows error # rcapache2 stop redirecting to systemctl stop apache2 [1] http://127.0.0.1/ shows error in web browser Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator at root@localhost to inform them of the time this error occurred, and the actions you performed just before this error. More information about this error may be available in the server error log. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.4.4 (Linux/SUSE) Server at 127.0.0.1 Port 80 [2] logs cat /var/log/apache2/error_log [Tue Jun 18 22:23:15.774899 2013] [ssl:warn] [pid 8451] AH01873: Init: Session Cache is not configured [hint: SSLSessionCache] [Tue Jun 18 22:23:15.778157 2013] [mpm_prefork:notice] [pid 8451] AH00163: Apache/2.4.4 (Linux/SUSE) OpenSSL/1.0.1e configured -- resuming normal operations [Tue Jun 18 22:23:15.778229 2013] [core:notice] [pid 8451] AH00094: Command line: '/usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -D SYSTEMD -D NO_DETACH' [Tue Jun 18 22:23:47.612967 2013] [mpm_prefork:notice] [pid 8451] AH00170: caught SIGWINCH, shutting down gracefully [3] rpms installed listing # rpm -qa | grep -i apache2 | sort apache2-2.4.4-4.1.x86_64 apache2-debuginfo-2.4.4-4.1.x86_64 apache2-debugsource-2.4.4-4.1.x86_64 apache2-devel-2.4.4-4.1.x86_64 apache2-doc-2.4.4-4.1.noarch apache2-event-2.4.4-4.1.x86_64 apache2-event-debuginfo-2.4.4-4.1.x86_64 apache2-example-pages-2.4.4-4.1.x86_64 apache2-itk-2.4.4-4.1.x86_64 apache2-itk-debuginfo-2.4.4-4.1.x86_64 apache2-prefork-2.4.4-4.1.x86_64 apache2-prefork-debuginfo-2.4.4-4.1.x86_64 apache2-utils-2.4.4-4.1.x86_64 apache2-utils-debuginfo-2.4.4-4.1.x86_64 apache2-worker-2.4.4-4.1.x86_64 apache2-worker-debuginfo-2.4.4-4.1.x86_64 [3] using as a guide http://en.opensuse.org/SDB:LAMP_setup#Setting_up_Apache2 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] New package: gitslave
by Robert Munteanu 18 Jun '13

18 Jun '13

Hi, I'd like to submit gitslave [1] to factory. According to its home page "Gitslave creates a group of related repositories—a superproject repository and a number of slave repositories—all of which are concurrently developed on and on which all git operations should normally operate; so when you branch, each repository in the project is branched in turn" The project is currently hosted in devel:tools:scm [2] and I've created sr 179398 [3] for it . Cheers, Robert [1]: http://gitslave.sourceforge.net/ [2]: https://build.opensuse.org/package/show?package=3Dgitslave&project=3Ddevel%= 3Atools%3Ascm [3]: https://build.opensuse.org/request/show/179398 -- http://robert.muntea.nu/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Bugzilla version for milestone 2?
by Per Jessen 18 Jun '13

18 Jun '13

Bugzilla has only Milestone 0 and 1. Which one is the correct one for 13.1M2 ? -- Per Jessen, Zürich (20.1°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Start Delay
by Hans-Peter Holler 17 Jun '13

17 Jun '13

Hi, with systemd 204 I see a 85 sec delay at boot with these entries in the journal: ... Jun 17 18:19:06 holler-n2 kernel: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off Jun 17 18:20:31 holler-n2 systemd[1]: Job dev-disk-by\x2did- ata\x2dTOSHIBA_MK7575GSX_5164D0B1B\x2dpart9.device/start timed out. Jun 17 18:20:31 holler-n2 systemd[1]: Timed out waiting for device dev-disk- by\x2did-ata\x2dTOSHIBA_MK7575GSX_5164D0B1B\x2dpart9.device. Jun 17 18:20:31 holler-n2 systemd[1]: Dependency failed for /dev/disk/by- id/ata-TOSHIBA_MK7575GSX_5164D0B1B-part9. Jun 17 18:20:31 holler-n2 systemd[1]: Starting Swap. ... Happens with all my Factory installations. Greetings Hans-Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] libdb-6.0
by Jan Engelhardt 17 Jun '13

17 Jun '13

The current version of Berkeley DB in openSUSE is 4.8, which looks somewhat old, given that Oracle has released a 5.x and in fact has already arrived at 6.0. There are only very few API changes that need patches (in other packages). I have already submitted some. Current state is in home:jengelh:db6. The plan is to submit libdb-6_0 quite soon. As for objections or comments, do speak up. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 6

[opensuse-factory] Trouble when submitting package to factory
by Tomáš Chvátal 17 Jun '13

17 Jun '13

Heya, when I try to add following package to factory [1] it fails telling me that download the tarball failed. But when I attempt to do it with osc localrun, there is no issue an tarball is properly created. Any suggestions? Cheers Tom [1] https://build.opensuse.org/request/show/179071

3 3

[opensuse-factory] New package numad
by Mel Gorman 16 Jun '13

16 Jun '13

I'd like to submit a new package called numad to factory. This is a system daemon that attempts to identify processes that should be bound to NUMA nodes to improve overall performance on machines with multiple nodes. In preparation for working on the next stage of in-kernel automatic NUMA balancing support I compared current in-kernel automatic NUMA balancing, numad and manual tuning. In some cases numad can out-perform the current in-kernel implementation although in other cases it will actually perform worse than running with defaults. The expected cases where it performs better and worse are documented in the RPM description and the manual page. https://build.opensuse.org/package/show?package=numad&project=home%3Amgorman What is less clear to me is what project I should submit this to. I set the RPM group to System/Daemons and the Base:System devel project looked like a reasonable fit. Any suggestions on a suitable alternative or on how the package can be improved before submissions are welcome. -- Mel Gorman SUSE Labs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 30

[opensuse-factory] How do I handle these messages? domain!=0 runtime failed no sessmgr, no remotevolume...etc..
by Linda Walsh 15 Jun '13

15 Jun '13

When I start 'Terminal' (xfce-terminal), I get multiple error messages when I used to get none in the previous release. What do all these mean and how do deal with them? (what do I need to configure or turn on or what?) (Terminal:72592): GLib-WARNING **: (gerror.c:390):g_error_new_valist: runtime check failed: (domain != 0) Failed to connect to session manager: Failed to connect to the session manager: networkIdsList argument is NULL (Terminal:72592): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.UDisks2VolumeMonitor is not supported Error creating proxy: Error calling StartServiceByName for org.gtk.Private.GduVolumeMonitor: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process /usr/lib/gvfs/gvfs-gdu-volume-monitor exited with status 127 (g-dbus-error-quark, 25) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Debuginfo for x86_64 kernels (systemtap complaints about arch mismatch)
by Andrey Borzenkov 15 Jun '13

15 Jun '13

I'm trying to make systemtap work on 12.3 x86_64. Attempt to compile latencytap.stp from included examples gives bor@opensuse:/tmp> sudo stap latencytap.stp semantic error: ELF machine i?86| (code 3) mismatch with target x86_64 in '/usr/lib/debug/boot/vmlinux-3.7.10-1.11-desktop.debug' semantic error: while resolving probe point: identifier 'kernel' at latencytap.stp:51:7 source: kernel.function("deactivate_task") { ^ semantic error: no match semantic error: while resolving probe point: identifier 'kernel' at :62:7 source: kernel.function("activate_task") { ^ semantic error: while resolving probe point: identifier 'scheduler' at :81:7 source: probe scheduler.cpu_on { ^ Pass 2: analysis failed. Try again with another '--vp 01' option. Well, there is no debuginfo for x86_64, only for i586. Is it missing indeed or is it systemtap issue? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 5

[opensuse-factory] Cant switch to console anymore
by Malte Gell 14 Jun '13

14 Jun '13

I just discovered a strange problem. I wanted to go to the console, hit ctr-alt-f1 as usual, but nothing happens. I just can´t go to the console. I tried all f keys from f1 to f10, nothing works... The console is like locked up. I use the drivers from nVidia, any issues there? Using driver version 319.17. Kernel is 3.9.4-11.g51bf0ff-desktop on openSUSE 12.3 Tumbleweed. Do you have any clue what might be wrong there? Thanx Malte -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 10

[opensuse-factory] The Python3 devel project will be devel:languages:python3
by Sascha Peilicke 12 Jun '13

12 Jun '13

Hi guys, since the Python bunch had the discussion recently, I want to drop all python3 package _links in devel:languages:python and use their counterparts in devel:languages:python3 as devel packages for Factory from now on. This would include a number of chgdevel requests for Factory [1]. The idea behind to have only python2 packages in devel:languages:python. Currently, this project reached a size where it became tedious to use "zypper up". However, we will continue to track spec files for both python versions at the old package location (d:l:p). It should be easier to keep spec files in sync this way and you can submit changes for both in a single submit request. So for the packager, this won't change much. If you add a python3 spec file, a project maintainer will branch it to devel:languages:python3 once your sr is accepted. If we end up in far distant future where only python3 matters and the py2 maintenance burden isn't justified anymore, both projects can become independent of each other. For that we would simply remove _link files to d:l:p. So if nobody objects, I'll do it this afternoon. [1] http://paste.opensuse.org/83082794 -- Viele Grüße, Sascha Peilicke -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] What is the recommended procedure for suspending ?
by Malte Gell 10 Jun '13

10 Jun '13

Hi there, I made my experiments with suspending using the s2ram command. Now, the SDB says s2ram was deprecated: http://en.opensuse.org/SDB:Suspend_to_RAM s2ram is part of the suspend package. Can I now safely remove the suspend package? What is now the recommended way for suspending with kernel 3.9.x? What is the recommended command to suspend from the command line? Doesn´t pm-utils depend on the suspend package? Thanx Malte -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 39

[opensuse-factory] remote logins have strange keyboard setting... mostly latin, but not sure what? after fact update
by Linda Walsh 10 Jun '13

10 Jun '13

I upgraded and rebooted my server this yesterday and have some oddness when I login to it remotely now -- at least until I type "reset". The most noticeable feature is some keys on my keyboard are remapped to some foreign keys...but NOT that many. Specifically, on the left, tilda and at sign ~@ => ß§ On the left side it's the brack/brace /backslash and vertical bar -> []\ => ÄÜÖ {}| => äüö ---- My keyboard/terminal is still set to a 'linux' terminal, and locale settings look like: LANG=en_US.UTF-8 LC_CTYPE=en_US.UTF-8 LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_COLLATE=C LC_MONETARY="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_PAPER="en_US.UTF-8" LC_NAME="en_US.UTF-8" LC_ADDRESS="en_US.UTF-8" LC_TELEPHONE="en_US.UTF-8" LC_MEASUREMENT="en_US.UTF-8" LC_IDENTIFICATION="en_US.UTF-8" LC_ALL= ---- If I type "reset", the terminal goes back to "normal". If I start an X11 app like gvim from the terminal BEFORE I reset it, the X11 app catches the weird characters as well. But if I type 'reset' (ncurses-utils-5.9 in /usr/bin/), it resets the term and then if I launch an X util, it's "normal". Anyone have an idea about what might be going on? Nothing in the environment before/after seems strange (this is how a pre-reset v. post reset looks from diff: GPG_TTY=/dev/ttyp2 ö GPG_TTY=/dev/ttyp1 HISTFILE=/home/law/.histIshtar_ttyp2 ö HISTFILE=/home/law/.histIshtar_ttyp1 PIPESTATUS=(Ä0Ü="0" Ä1Ü="0") ö PIPESTATUS=(Ä0Ü="0" Ä1Ü="0" Ä2Ü="0") PPID=79754 ö PPID=78347 SSH_AUTH_SOCK=/tmp/ssh-2FyrkLSyYB/age ö SSH_AUTH_SOCK=/tmp/ssh-lwihqyNyKw/age SSH_CLIENT='192.168.4.12 49606 22' ö SSH_CLIENT='192.168.4.12 49605 22' SSH_CONNECTION='192.168.4.12 49606 19 ö SSH_CONNECTION='192.168.4.12 49605 19 SSH_TTY=/dev/ttyp2 ö SSH_TTY=/dev/ttyp1 TTY=/dev/ttyp2 ö TTY=/dev/ttyp1 TTY_NAME=ttyp2 ö TTY_NAME=ttyp1 tty=/dev/ttyp2 ö tty=/dev/ttyp1 Even though the chars are displaying 'funny', they still seem to have their normal meaning and function. If I use a windows dumb term to ssh in, I don't see the problem, but it doesn't know how to switch charsets or do whatever "securecrt" or xterm is doing... I tried it from a different computer... same thing. it's definitely an update on the server that is causing this... its very weird. but fortunately not that difficult to get around... Any ideas? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] subscribe
by Milen Kidane 09 Jun '13

09 Jun '13

-- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] after recent zypper dup : Thunderbird
by ellanios82 08 Jun '13

08 Jun '13

Hello Greg after recent zypper dup Thunderbird refuses to start - konsole output shows : /usr/bin/thunderbird (process:4103): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed Fontconfig warning: "/etc/fonts/conf.d/56-user.conf", line 14: reading configurations from ~/.fonts.conf is deprecated. ................. any ideas please how to fix ? thanks best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] Hibernation/suspend with systemd - documented? Where?
by Carlos E. R. 07 Jun '13

07 Jun '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have problems with hibernation under systemd, it crashes. What replaces now "/etc/suspend.conf"? It is missing. Page <https://en.opensuse.org/SDB:Suspend_to_RAM> is obsolete, it only documents till 11.3. The link to <SDB:Suspend Troubleshooting> is broken. Same applies to <https://en.opensuse.org/SDB:Suspend_to_disk> - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iEYEARECAAYFAlGvzfsACgkQtTMYHG2NR9W/MQCfaBfHlZs9S/UmgBS0MPB676T/ LJ4AnjfnTmgTNyD/P+WeVsjoDn06E+Im =ciWP -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

12 61

[opensuse-factory] openQA work
by Jos Poortvliet 07 Jun '13

07 Jun '13

Hi all, We have been working on openQA in an effort to improve QA for openSUSE. Read about it in the blog by Alberto: https://lizards.opensuse.org/2013/06/06/openqa-in-opensuse/ Cheers, Jos

2 1

[opensuse-factory] boost update^ what to do?
by Ilya Chernykh 07 Jun '13

07 Jun '13

Now many packages fail in Factory because of various boost errors. What we can do about it? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] -devel-32bit is missing deps on -devel
by Jan Engelhardt 06 Jun '13

06 Jun '13

I notice that in openSUSE 12.3, our xxx-devel-32bit packages suddenly lack a dependency on xxx-devel: 19:09 ares07:/FX/opensuse/distribution > rpm -qRp 12.1/repo/oss/suse/x86_64/zlib-devel-32bit-1.2.5_git201105272030-20.1.4.x86_64.rpm rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 zlib-32bit = 1.2.5_git201105272030 zlib-devel = 1.2.5_git201105272030 rpmlib(PayloadIsLzma) <= 4.4.6-1 19:09 ares07:/FX/opensuse/distribution > rpm -qRp 12.2/repo/oss/suse/x86_64/zlib-devel-32bit-1.2.7-2.1.2.x86_64.rpm rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 zlib-32bit = 1.2.7 zlib-devel = 1.2.7 rpmlib(PayloadIsLzma) <= 4.4.6-1 19:09 ares07:/FX/opensuse/distribution > rpm -qRp 12.3/repo/oss/suse/x86_64/zlib-devel-32bit-1.2.7-7.1.1.x86_64.rpm rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(PayloadIsLzma) <= 4.4.6-1 Intentional, accidental? Should we care and fix? (I was expecting that the baselibs magic would automatically do this, and thus it seems someone fiddled with the baselibs generator...) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] Tumbleweed: akonadiserver/mysql not running/cannot start
by Patrick Shanahan 06 Jun '13

06 Jun '13

Tumbleweed Today's update including kde 4.10.3 has left me with unstartable akonadiserver and mysql and I do not see reasons in "journalctl -n". KOrganizer error details @ http://wahoo.no-ip.org/~pat/akonadi-selftest-report-20130605.txt help... -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7

[opensuse-factory] gtk?-immodule-<lang> installation pre-selection
by Felix Miata 05 Jun '13

05 Jun '13

Why are these always pre-selected to be installed on English-only installations? Why are these always pre-selected to be installed on KDE-only installations? Why are these always pre-selected to be installed on minimal-X installations? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 27

[opensuse-factory] libnl-1_1 to libnl1
by Jan Engelhardt 05 Jun '13

05 Jun '13

For security:netfilter/libnl-1_1, rpmlint informs me that libnl-1_1.x86_64: W: shlib-legacy-policy-name-error libnl1 Your shared library package is not named after its SONAME, but it has been added to the list of legacy exceptions. Please do not rename the package until SONAME changes, but if you have to rename it for another reason, make sure you name it correctly. Is there a reason not to rename libnl-1_1 to libnl1 now? (There is never going to be a SONAME bump.) AFAICS, it's just an Obsolete-Provides away. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Re: XFS and openSUSE 12.1
by Linda Walsh 05 Jun '13

05 Jun '13

Roger Oberholtzer wrote: >>> Instead of the expected 80 msecs or so to do the compress and >>> write, it takes, say, 4 or 5 seconds. --- BTW, I forgot, have you (besides running iostat), run 'xlatencytop'? That will show you what your longest system calls are taking. @640x480 -- Are your jpegs that big I.e. what's the average size/jpeg? Is the bottleneck in compression? If that's the case, overall, that's where your 10 cpu's can benefit you. Let the compression and writes to disk happen asynchronously in bckground serviced by 'N' workers. At this point you say it takes 80ms to do the compress and write. You need to find out where things are spending their time. Is it 100% cpu bound (1 cpu@100%) for 30 minutes, then 100% disk-bound for 5 seconds? But if you wanted faster speeds, with 10 cpu's you could easily get 3-5x times that rate -- It sounds like you are doing everything in 1 execution thread right now? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] automake 1.13
by Stephan Kulow 05 Jun '13

05 Jun '13

Hi, Just to let you know: it has landed in factory. The staging project still had some left failing, but its number was low enough to go for factory. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Tumbleweed really needed for rolling release?
by Malte Gell 05 Jun '13

05 Jun '13

I see the repos named "current" are just a link to the current available openSUSE release. Let´s assume I install openSUSE 12.3 and after installation I change the 12.3 repos to "current", won´t I get a rolling release this way? I mean, once e.g. 13.1 is out, it will be put in "current" and thus I get the whole distribution updated? So I would have a rolling release without adding the Tumbleweed repo? Is this thought correct? Just change the repos to "current" and you automatically get the lates distribution on your harddrive? Malte -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 10

[opensuse-factory] APCI problems with kernel 3.9.4 ?
by Malte Gell 05 Jun '13

05 Jun '13

I use kernel 3.9.4-11.g51bf0ff-desktop from Tumbleweed on an Acer notebook. I can´t use suspend to RAM and suspend to DISK does not work either. It does not work from within KDE and does not work from command line (pm-suspend). Are there known issues with APCI and this kernel? Any workaround? Thanx Malte -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] Clean install of Tumbleweed on new computer
by Malte Gell 04 Jun '13

04 Jun '13

On opensuse.org you can only download a DVD for the current release. If one wants to install Tumbleweed cleanly on a new computer, do I have to first install the current release and the install Tumbleweed on top of it? Is this the way for a new machine that should get Tumbleweed? thanx Malte -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 14

[opensuse-factory] tumbleweed: purge-kernels stopped working
by Benoît Monin 04 Jun '13

04 Jun '13

Hi, I am running tumbleweed with multiversion enabled for the kernel. Since a few kernel releases, purge-kernels stopped working, I have to remove old kernel packages with zypper. I have configured multiversion to keep the latest and the running kernel. After a reboot, the previous kernel should be removed, since the purge-kernels service is enabled. But even if I run purge-kernels manually, nothing happens and purge-kernels complains that the running kernel is not installed. It might be because the kernel name and the package name differ: There is an additionnal ".1" in the package name. Anyone else seeing this ? Below is the output of commands related to this problem : # zypper se -si kernel-desktop Loading repository data... Reading installed packages... S | Name | Type | Version | Arch | Repository --+----------------+---------+---------------------+--------+------------------ i | kernel-desktop | package | 3.9.3-10.1.g06ad9d8 | x86_64 | (System Packages) i | kernel-desktop | package | 3.9.4-11.1.g51bf0ff | x86_64 | tumbleweed # uname -r 3.9.4-11.g51bf0ff-desktop # grep ^multiversion /etc/zypp/zypp.conf multiversion = provides:multiversion(kernel) multiversion.kernels = latest,running # systemctl status purge-kernels.service purge-kernels.service - Purge old kernels Loaded: loaded (/usr/lib/systemd/system/purge-kernels.service; enabled) Active: inactive (dead) since Mon, 2013-06-03 18:49:06 CEST; 55min ago Main PID: 455 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/purge-kernels.service # purge-kernels /sbin/purge-kernels: Running kernel 3.9.4-11.g51bf0ff-x86_64/desktop not installed. NOT removing any packages for flavor x86_64/desktop. /sbin/purge-kernels: Nothing to do. -- Benoît -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] grub2 theme designers guide
by Andrey Borzenkov 04 Jun '13

04 Jun '13

Not sure where it belongs (is there dedicated opensuse-art ML?) but it may be helpful. Keep in mind that it is based on current grub2 trunk where some bugs are fixed. http://wiki.rosalab.ru/en/index.php/Grub2_theme_/_designer%27s_guide -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Integration of YaST in Ruby into Factory/openSUSE 13.1
by David Majda 04 Jun '13

04 Jun '13

Hi, as some may know, since January few SUSE developers in Prague are working on automatically translating YaST codebase from YCP (an old proprietary language) into Ruby. The main goals are to give the platform a technology boost, so that we can evolve it easier in the future, and lower the effort spent on maintenance in the long term. The project recently reached an important milestone -- we are able to install a 12.3-based system using an installer composed only of translated YaST modules: http://lists.opensuse.org/yast-devel/2013-05/msg00026.html We would like to integrate that work Factory/openSUSE 13.1 soon. Technically the integration mainly means that we would do a final switch of the language to Ruby in YaST's Git repository and submit updated packages into Factory. We think we will be able to do this in time for M4. We'd also like to use M2 and M3 as test-beds and produce our own versions of the images (meaning we'll take exactly the same packages as in M2/M3, replace the YaST ones with Ruby version, and build the image in the same way as official images). We'd also like to use the openQA infrastructure to test our images extensively. We think that with this approach we'll be well-prepared for the final integration and we'll minimize the number of bugs and regressions. For more details about the plan and reasoning behind it, see my e-mail on yast-devel: http://lists.opensuse.org/yast-devel/2013-05/msg00035.html Since this is a big change, I thought it would be good to announce it here. If anyone has any questions or objections, please let me know so we can discuss them and possibly adapt the plan. Thanks. -- David Majda SUSE Studio developer http://susestudio.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

12 18

[opensuse-factory] Upgrading openSUSE 12.3 to Tumbleweed
by Malte Gell 03 Jun '13

03 Jun '13

Hi there, I just upgraded - or try to do so - openSUSE 12.3 to Tumbleweed. I now did the following, I deleted all 12.3 repos from YaST and then I added theses repos with the following priorities: update/openSUSE-current/ priority 75 update/openSUSE-non-oss-current/ priority 75 openSUSE:/Tumbleweed/standard/ priority 79 distribution/openSUSE-current/repo/non-oss/ priority 80 distribution/openSUSE-current/repo/oss/ priority 80 And the Packman stuff, priority 81 (Essentials, Extra, Games, Multimedia). Does this make sense so far? After the updates, /etc/SuSE-release still says "openSUSE 12.3" and not Tumbleweed, in the Grub2 screen I also still see openSUSE 12.3. Does this not change to "Tumbleweed"? The latest stable KDE is part of Tumbleweed, I do not need seperate KDE repo for Tumbleweed? Thanx Malte -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 7

[opensuse-factory] OBS downtime in about 8 hours
by Adrian Schröter 03 Jun '13

03 Jun '13

JFYI We need to move the data of the binary storage system to a new place. Therefore please expect a downtime in 8 hours between 22:00 - 1:00 UTC The server will be up most of the time, but server side builds will be disabled for a final sync for at least 1 hour. You can do any source or request operation during the time nevertheless. But do not expect that any job starts or the build state does change. We will have afterwards a bit faster binary backend and we will be prepared to split the binary backend using multiple hosts. This will allow us to scale better in future. bye adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] freeware licence obs/factory
by Damian Ivanov 02 Jun '13

02 Jun '13

Hi all, What's the status on including stuff into ob/factory that has a freeware (non-binary, e.g icon-themes, cursor themes and co.) licence into factory/obs in general? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1