On Wed, 2008-08-06 at 10:59 -0700, Martin Mielke wrote:
Hi,
at home I use a humble nVidia GeForce 6200 LE card (no idea whether this is good or bad, it just works) and it supports dual-head like a charm even with OpenGL and 3D acceleration. One monitor is using DVI and the other one VGA...
-- # hwinfo --gfx 09: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.310] UDI: /org/freedesktop/Hal/devices/pci_10de_163 Unique ID: VCu0.WtHwSGDW4X4 Parent ID: vuMS.wxFwtL2jas4 SysFS ID: /devices/pci0000:00/0000:00:0e.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia GeForce 6200 LE" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0163 "GeForce 6200 LE" Revision: 0xa1 Driver: "nvidia" Driver Modules: "nvidia" Memory Range: 0xd0000000-0xd0ffffff (rw,non-prefetchable) Memory Range: 0xc0000000-0xcfffffff (rw,prefetchable) Memory Range: 0xd1000000-0xd1ffffff (rw,non-prefetchable) Memory Range: 0xd2000000-0xd201ffff (ro,prefetchable,disabled) IRQ: 18 (86523866 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v000010DEd00000163sv00000000sd00000000bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nvidia Driver Info #1: XFree86 v4 Server Module: nvidia 3D Support: yes Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #17 (PCI bridge)
Primary display adapter: #9 --
All I did was to install the proper driver using YaST (don't forget to add the nVidia repositories!) and eventually run sax2 to make the necessary changes to my screens configuration.
In my case, both monitors are the same model...
HTH, Martin
Mine are not the same. Laptop display at 1680x1050 and, in this case, an external CTX 19" monitor that support 1280x1024. James -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org