Hi,
I am pretty new to linux. So please treat me as pretty novice, please
forgive me about that.
I have installed SuSE 10.1 on Intel D915GUX mother board with Pentuim4 EM64T
processor. My monitor is Samtron 15inch model 56V.
The X11 graphics is broken whenever I try to have a resolution higher than
800x600. I tried with different configuration but none did help.
I have the xorg.conf.install file as follows:
-------------- start paste --------------------------
# generic XFree86 4.x configuration file
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/truetype/"
FontPath "/usr/X11R6/lib/X11/fonts/URW/"
FontPath "/usr/X11R6/lib/X11/fonts/uni/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
ModulePath "/usr/X11R6/lib64/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "BlankTime" "0"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbRules" "xfree86"
Option "XkbKeycodes" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Protocol" "explorerps/2"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
HorizSync 25-40
Identifier "Monitor[0]"
ModelName "Initial"
VendorName "Initial"
VertRefresh 47-75
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "800x600" 29.38 800 816 896 992 600 601 604 617 # 1. Try
Modeline "640x480" 31.5 640 656 720 840 480 481 484 500 #
6. Try
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 #
5. Try
Modeline "640x480" 28 640 664 760 800 480 491 493 525 #
4. Try
Modeline "640x480" 28.32 640 664 760 800 480 491 493 525 #
3. Try
Modeline "640x480" 25.18 640 664 760 800 480 491 493 525 #
2. Try
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #
1. Try
EndSection
Section "Monitor"
HorizSync 28-33
Identifier "Monitor[vmware]"
ModelName "Initial"
VendorName "Initial"
VertRefresh 43-72
UseModes "Modes[vmware]"
EndSection
Section "Modes"
Identifier "Modes[vmware]"
Modeline "800x600" 29.38 800 816 896 992 600 601 604 617
EndSection
Section "Monitor"
HorizSync 31-48
Identifier "Monitor[vesa]"
ModelName "VESA"
VendorName "VESA"
VertRefresh 50-60
EndSection
# Screen Section for module X support
# -------------------------------------
Section "Screen"
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
# Screen Section for fbdev support
# ----------------------------------
Section "Screen"
SubSection "Display"
Depth 16
Modes "default"
EndSubSection
SubSection "Display"
Depth 15
Modes "default"
EndSubSection
SubSection "Display"
Depth 15
Modes "default"
EndSubSection
SubSection "Display"
Depth 24
Modes "default"
EndSubSection
SubSection "Display"
Depth 32
Modes "default"
EndSubSection
SubSection "Display"
Depth 8
Modes "default"
EndSubSection
Device "Device[fbdev]"
Identifier "Screen[fbdev]"
Monitor "Monitor[0]"
EndSection
# Screen Section for vesa support
# ----------------------------------
Section "Screen"
SubSection "Display"
Depth 16
Modes "default"
EndSubSection
SubSection "Display"
Depth 8
Modes "default"
EndSubSection
Device "Device[vesa]"
Identifier "Screen[vesa]"
Monitor "Monitor[vesa]"
EndSection
# Screen Section for vmware support
# ----------------------------------
Section "Screen"
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
Device "Device[vmware]"
Identifier "Screen[vmware]"
Monitor "Monitor[vmware]"
EndSection
# Device Sections...
# -------------------
Section "Device"
#BusID "1:0:0"
Driver "ChangeMe"
Identifier "Device[0]"
# device_options
Option "sw_cursor" "on"
EndSection
Section "Device"
Driver "fbdev"
Identifier "Device[fbdev]"
# fbdev_options
Option "ShadowFB" "off"
EndSection
Section "Device"
Driver "vesa"
#Option "DefaultRefresh"
Option "ModeSetClearScreen" "no"
Identifier "Device[vesa]"
EndSection
Section "Device"
Driver "vmware"
Identifier "Device[vmware]"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Xinerama" "off"
Screen "Screen[fbdev]"
EndSection
-------------- end paste --------------------------
also the old xorg.conf file looked like (which is now identical with
xorg.conf.install, old xorg.conf was breaking the graphics)
-------------- start paste --------------------------
# /.../
# SaX generated X11 config file
# Created on: 2006-07-28T08:47:46+0530.
#
# Version: 7.1
# Contact: Marcus Schaefer