Here it is But as usuall... the mailling list Messes it all up.... Therefore I've attached a pdf, which will be removed from the mail on the list.... For those interested it can be retrieved from: http://home.intergga.ch/Westrick/SSH_NxServer.pdf For those interested there is also another document there called: http://home.intergga.ch/Westrick/Using_SSH_tunnels_from_M$_Windows.pdf Which explains how to use Putty on windows to connect to linux machines... Have Fun.... Jerry SSH Configuration The following changes need to be made for SSH: User Group to control access Create Group “remotessh”, Add users that are allowed remote access to the group. In file /etc/ssh/sshd_config add the following lines to bottom of file: # # Westrick GmbH Configuration # Port 26 AllowGroups remotessh GatewayPorts yes X11DisplayOffset 50 X11Forwarding yes restart ssh server with: “rcsshd restart” In file /etc/ssh/ssh_config Add lines: ForwardAgent yes ForwardX11 yes Then for each known host with alternate port add following lines before “Host *” line: Host jerry.westrick.com Port 26 Setup NxServer Install the nxserver software with yast. Execute following command in root-shell nxsetup --install --setup-nomachine-key Edit /etc/nxserver/node.conf: change port to 26 SSHD_PORT=26 Enable SSH Authentication ENABLE_SSH_AUTHENTICATION=”1” Add user nx to remotessh group! Download nxclient from http://www.nomachine.com/download.php . When connecting you need to specify 2 options: 1.General->Server->Port is 26. 2.Advanced->Network->Enable SSL encryption of all traffic is enabled. Open port 26 in Firewall!