Hallo, Am Fre, 12 Feb 2010, Dieter Kluenter schrieb:
Karl Payer
writes: Das Manual gibt recht detailliert Auskunft: For proper system operation, if the computer supports DDR-SDRAM DIMMs, the DIMMs must be: - industry-standard 184-pin - unbuffered PC2100 266 MHz-, PC2700 333 MHz-, or PC3200 400 MHz-compliant - 2.5 volt DDR-SDRAM DIMMs. The DDR-SDRAM DIMMs must also: - support CAS latency 2 or 2.5 (CL = 2 or CL = 2.5) - contain the mandatory JEDEC SPD information In addition, the computer supports: - 128Mbit, 256Mbit, and 512Mbit non-ECC memory technologies ^^^^^^ - single-sided and double-sided DIMMS - DIMMs constructed with x8 and x16 DDR devices; DIMMs constructed with x4 SDRAM are not supported
Als dazu passende Kandidaten haette ich gefunden (z.B. bei MISCO):
Kingston ValueRAM Memory - 2 GB ( 2 x 1 GB ) - DIMM 184-PIN - DDR - 333 MHz ( PC2700 ) - CL2.5 Hersteller: Kingston Herstellernummer: KVR333X64C25K2/2G
Das Motherboard unterstützt max. 512 MB, laut Herstellerangabe, da führen dann 1GB Riegel zu Problemen.
Verwechselst du nicht 512MB DIMMs mit 512Mbit Chips auf den DIMMs? Obige 1 GB Riegel müßten übrigens aus 16 x 512Mbit Chips bestehen[1] Aber ohne dass Motherboard zu kennen (siehe auch die dmidecode Ausgabe) läßt sich da nix genaueres zu sagen. -dnh [1] http://www.ec.kingston.com/ecom/configurator_new/partsinfo.asp?root=&LinkBack=&ktcpartno=KVR333X64C25K2/2G -> dort da Datenblatt: 16 Chips à 64MB = 512Mbit -- Es ist nicht schoen, wenn man am Kernel schrauben _muss_, es ist aber sehr nuetzlich, wenn man es _kann_. -- Falk Willberg -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org