https://bugzilla.novell.com/show_bug.cgi?id=301699#c1
--- Comment #1 from Johannes Nohl 2007-08-27 08:13:03 MST ---
Problem still there in Beta2. Also mainboard is detected as ASUS K8NX (shown at
boot during installation).
I tried to install although. After installation there is /dev/sda but no
/dev/sda1
/dev/sda2
/dev/sda3
/dev/sda4 (extended)
/dev/sda5
/dev/sda6
Maybe they are missing because the installer before didn't recognize them? How
do I set them manually?
But parted (>parted /dev/sda) is printing this:
GNU Parted 1.8.7
Verwende /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) p
Model: ATA Maxtor 6Y120L0 (scsi)
Disk /dev/sda: 123GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32,3kB 10,2GB 10,2GB primary fat32 , , , , , , lba, , ,
type=0c, ,
2 10,2GB 37,0GB 26,8GB extended , , , , , , lba, , ,
type=0f, ,
5 10,2GB 31,7GB 21,5GB logical fat32 , , , , , , , , ,
type=0b, ,
6 31,7GB 37,0GB 5371MB logical fat32 , , , , , , , , ,
type=0b, ,
3 37,0GB 38,1GB 1078MB primary , , , , , , , , ,
type=82, ,
4 38,1GB 123GB 84,8GB primary fat32 , , , , , , , , ,
type=0b, ,
Neither this nor the other hdd is scsi. Although the second one (/dev/hdb) is
S-ATA.
I raised priority because it seems that you can't mix IDE and S-ATA connected
drives.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.