https://bugzilla.novell.com/show_bug.cgi?id=227230 ------- Comment #7 from mhorvath@novell.com 2006-12-20 03:25 MST ------- You should be able to see the usb mass storage device. So, please try to load the module usb-storage by typing: modprobe usb-storage . Then list the /dev directory by typing: ls /dev . Look for the devices which start with the sd, e.g. sda sda1 sda2 sdb sdb1 sdc ... then please connect your usb floppy and turn it on. List the /dev again and look for the sd devices. Recognize which is new (there should appear any), that's your usb floppy. There should be one device without a nubmer at the end of it, e.g. sdc , and also at least one with the previous as a base and a number at the end, e.g. sdc1 . If you have it, mount the device by typing: mount /dev/sdc1 /mnt/fl , where /dev/sdc1 is the usb device and the /mnt/fl is the previously created directory as I wrote you before. Then you should be able to access the usb floppy in the /mnt/fl, before you want to unplug (turn-off etc.) the usb floppy you have to "eject" it py typing: eject /dev/sdc . and that's all. I hope it will work for you, if not please report any error. Thank you. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.