On 12/31/2008 at 11:37 AM, in message
, PGNet wrote: Considering your instructions/advice, I did come across "11.1, Xen, Yast2 and Bridging Failed Setup"
http://forums.opensuse.org/install-boot-login/402426-11-1-xen-yast2-bridging... d-setup.html
Iiuc, the OP's doing specifically what we're talking about here/above ... and is having problems, subsequently dropping back to 11.0.
Can you verify that this scenario -- under OS 11.1 -- has, in fact, been tested & demonstrated to work? If so, what's going on for the user in the post?
The post-install automated bridge configuration has been tested in some fashion, but only on a limited scale and certainly not across all possible network configurations. I would not be shocked to learn that problems exist in that code as the majority of XEN testing was done on machines where the XEN pattern was selected at OS install time, which sets up a bridged network configuration right from the start. Since bridge setup is not difficult when using YaST, I'd recommend doing the setup manually and avoid the possibility of running into errors with the "Install Hypervisor and Tools" automated method. Jason -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-virtual+help@opensuse.org