On one of my machines I'm running SuSE 9.1 with cdrecord updated to version 2.01-4. I'm able to write DVDs (the +R variety) with k3b without a problem, but I want to be able to create them from a shell script, and for that I need cdrecord. The trouble is that when I try to run it, I see a message indicating that I need to go to Georg Schilling's website and get a key in order to write such DVDs -- and the key needs to be periodically renewed. Hardly the way I want to go. The unpatched program will write DVDs but they're unreadable. I've also tried using growisofs, with not totally satisfactory results. The DVDs it writes are readable on the drive that wrote them and on some other DVD drives but not on all. On the other hand, the ones written with k3b are readable anywhere. Does anyone have success stories about writing +R DVDs? Paul
On Tuesday 13 December 2005 01:07, Paul W. Abrahams wrote:
On one of my machines I'm running SuSE 9.1 with cdrecord updated to version 2.01-4. I'm able to write DVDs (the +R variety) with k3b without a problem, but I want to be able to create them from a shell script, and for that I need cdrecord. The trouble is that when I try to run it, I see a message indicating that I need to go to Georg Schilling's website and get a key in order to write such DVDs -- and the key needs to be periodically renewed. Hardly the way I want to go. The unpatched program will write DVDs but they're unreadable.
I've also tried using growisofs, with not totally satisfactory results. The DVDs it writes are readable on the drive that wrote them and on some other DVD drives but not on all. On the other hand, the ones written with k3b are readable anywhere.
k3b does nothing you can't do from the command line or from a shell script. It's "just" a GUI frontend to command line utilities. In the output from k3b you can see the exact commands it runs, with parameters and everything. Why not run the same ones from your script?
On Monday 12 December 2005 8:07 pm, Anders Johansson wrote:
k3b does nothing you can't do from the command line or from a shell script. It's "just" a GUI frontend to command line utilities. In the output from k3b you can see the exact commands it runs, with parameters and everything. Why not run the same ones from your script?
Where does that output show up? If I call k3b from a terminal window instead of from the desktop, will I see it in the terminal window? And by the way, does anyone have more info about SuSE cdrecord and its relation to Georg Schilling's ProDVD? Paul
On Mon, 2005-12-12 at 20:15 -0500, Paul W. Abrahams wrote:
On Monday 12 December 2005 8:07 pm, Anders Johansson wrote:
k3b does nothing you can't do from the command line or from a shell script. It's "just" a GUI frontend to command line utilities. In the output from k3b you can see the exact commands it runs, with parameters and everything. Why not run the same ones from your script?
Where does that output show up? If I call k3b from a terminal window instead of from the desktop, will I see it in the terminal window?
And by the way, does anyone have more info about SuSE cdrecord and its relation to Georg Schilling's ProDVD?
Paul
ps -auxww|grep cdre (or k3b or growiso) not sure what K3b uses but this should give you a few ideas. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998
On Tuesday 13 December 2005 02:15, Paul W. Abrahams wrote:
Where does that output show up? If I call k3b from a terminal window instead of from the desktop, will I see it in the terminal window?
Not sure. But in the popup you get when you're actually burning a DVD, you have a button "show debugging output", which will show you the full info
And by the way, does anyone have more info about SuSE cdrecord and its relation to Georg Schilling's ProDVD?
First of all, it's Jörg, not Georg. Second, SUSE's version of the DVD tool chain means you don't need Schilling's stuff. SUSE's software is based on it, but it is capable of burning DVDs without any registration keys or anything
** Reply to message from Anders Johansson
Second, SUSE's version of the DVD tool chain means you don't need Schilling's stuff. SUSE's software is based on it, but it is capable of burning DVDs without any registration keys or anything
How do I add the ProDVD key to xcdroast? I can manually add it to /root/.xcdroast/xcdr.cfg, but it has no effect--even if I set it in the environment variable CDR_SECURITY> Ed Harrison, Registered Linux User #199533 SuSE 10.0, Kernel 2.6.13 PolarBar Mailer 1.26
On Tuesday 13 December 2005 06:04, Ed Harrison wrote:
** Reply to message from Anders Johansson
on Tue, 13 Dec 2005 02:30:21 +0100 Second, SUSE's version of the DVD tool chain means you don't need Schilling's stuff. SUSE's software is based on it, but it is capable of burning DVDs without any registration keys or anything
How do I add the ProDVD key to xcdroast?
I can manually add it to /root/.xcdroast/xcdr.cfg, but it has no effect--even if I set it in the environment variable CDR_SECURITY>
Which part of "you don't need it" don't you understand? If you're not using SUSE software, please contact xcdroast or Mr. Schilling with such questions
** Reply to message from Anders Johansson
Which part of "you don't need it" don't you understand?
If you're not using SUSE software, please contact xcdroast or Mr. Schilling with such questions
You know, I have always appreciated your excellent help to this list. This is uncalled for. If xcdroast would write a DVD, then I would not have asked. So, let's assume that I have a SuSE 10.0 installation and I chose "Gnome" during installation and all went well--no errors. In xcdroast (running as root since it was not compiled with non-root support) from the SuSE 10 DVD, in Create Cd>>Master Tracks>>Create session/image where I am supposed to be able to choose DVD as a Disc Type, there is no such choice--only various sizes of CDs. Therefore, I am using software from SuSE and it doesn't work AND "I (obviously) DO need it", or something similar, to make it work. I was simply asking for your input. Ed Harrison, Registered Linux User #199533 SuSE 10.0, Kernel 2.6.13 PolarBar Mailer 1.26
On Tuesday 13 December 2005 00:40, Ed Harrison wrote:
** Reply to message from Anders Johansson
on Tue, 13 Dec 2005 06:12:16 +0100 Which part of "you don't need it" don't you understand?
If you're not using SUSE software, please contact xcdroast or Mr. Schilling with such questions
You know, I have always appreciated your excellent help to this list. This is uncalled for. If xcdroast would write a DVD, then I would not have asked. So, let's assume that I have a SuSE 10.0 installation and I chose "Gnome" during installation and all went well--no errors.
In xcdroast (running as root since it was not compiled with non-root support) from the SuSE 10 DVD, in Create Cd>>Master Tracks>>Create session/image where I am supposed to be able to choose DVD as a Disc Type, there is no such choice--only various sizes of CDs.
Therefore, I am using software from SuSE and it doesn't work AND "I (obviously) DO need it", or something similar, to make it work.
I was simply asking for your input.
Ed Harrison, Registered Linux User #199533 SuSE 10.0, Kernel 2.6.13 PolarBar Mailer 1.26 ========== Ed, I don't think Anders was trying to be rude to you. It's just that, as far as I could tell, they had tried explaining it to you already, yet you missed it or didn't understand it. Whichever, it's up to you to explain what wasn't clear, if you did not comprendo.
K3b is usable both in Gnome or KDE and if all programs needed by it are installed, DVD burning is quite simple. I haven't used XCDroast in a long time, but do it remember somewhat more confusing to use. Once acclimated to it, it's a pretty good program, but I'm not sure it's kept up as well as K3b. I'm sorry I can't be of much help with it, as I'm pretty well stuck on k3b, as many here are. Gnome programs, KDE programs are not just for the interface they were designed in, so most are as efficient working in one as the other. I just started xcdroast up and find it still at an older version. it also requires the programs you've mentioned in order to burn DVDs, else you are restricted to just CDs. Again, I like everyone else here, I suggest you use k3b for your DVD burning. regards, Lee
** Reply to message from BandiPat
Ed, I don't think Anders was trying to be rude to you. It's just that, as far as I could tell, they had tried explaining it to you already, yet you missed it or didn't understand it. Whichever, it's up to you to explain what wasn't clear, if you did not comprendo.
K3b is usable both in Gnome or KDE and if all programs needed by it are installed, DVD burning is quite simple. I haven't used XCDroast in a long time, but do it remember somewhat more confusing to use. Once acclimated to it, it's a pretty good program, but I'm not sure it's kept up as well as K3b. I'm sorry I can't be of much help with it, as I'm pretty well stuck on k3b, as many here are.
Gnome programs, KDE programs are not just for the interface they were designed in, so most are as efficient working in one as the other.
I just started xcdroast up and find it still at an older version. it also requires the programs you've mentioned in order to burn DVDs, else you are restricted to just CDs. Again, I like everyone else here, I suggest you use k3b for your DVD burning.
regards, Lee
I understand all that now with a fresher mind and several hours of research on how the under lying programs.
From an old file at http://www.seismo.ethz.ch/linux/xcdroast.html, Step 7, the solution is fairly simple:
1. get cdrecord-ProDVD 2. copy /usr/bin/cdrecord to /usr/bin/cdrecord_orig 3. copy downloaded prodvd binary to /usr/bin/cdrecord (date-limited useability, replace occasionally, current to 6/11/2006) 4. add to ~/.bashrc ( I added to /home/ed and to /root): CDR_SECURITY=[key from README file that comes with cdrecord-ProDVD] export CDR_SECURITY 5. log-out; log-in [even in a terminal window] 6. xcdroast Now all options for DVD are available. Ed Harrison, Registered Linux User #199533 SuSE 10.0, Kernel 2.6.15 PolarBar Mailer 1.26
** Reply to message from BandiPat
Ed, I don't think Anders was trying to be rude to you. It's just that, as far as I could tell, they had tried explaining it to you already, yet you missed it or didn't understand it. Whichever, it's up to you to explain what wasn't clear, if you did not comprendo.
K3b is usable both in Gnome or KDE and if all programs needed by it are installed, DVD burning is quite simple. I haven't used XCDroast in a long time, but do it remember somewhat more confusing to use. Once acclimated to it, it's a pretty good program, but I'm not sure it's kept up as well as K3b. I'm sorry I can't be of much help with it, as I'm pretty well stuck on k3b, as many here are.
Gnome programs, KDE programs are not just for the interface they were designed in, so most are as efficient working in one as the other.
I just started xcdroast up and find it still at an older version. it also requires the programs you've mentioned in order to burn DVDs, else you are restricted to just CDs. Again, I like everyone else here, I suggest you use k3b for your DVD burning.
regards, Lee
I understand all that now with a fresher mind and several hours of research on how the under lying programs.
From an old file at http://www.seismo.ethz.ch/linux/xcdroast.html, Step 7, the solution is fairly simple:
1. get cdrecord-ProDVD 2. copy /usr/bin/cdrecord to /usr/bin/cdrecord_orig 3. copy downloaded prodvd binary to /usr/bin/cdrecord (date-limited useability, replace occasionally, current to 6/11/2006) 4. add to ~/.bashrc ( I added to /home/ed and to /root): CDR_SECURITY=[key from README file that comes with cdrecord-ProDVD] export CDR_SECURITY 5. log-out; log-in [even in a terminal window] 6. xcdroast Now all options for DVD are available. Ed Harrison, Registered Linux User #199533 SuSE 10.0, Kernel 2.6.15 PolarBar Mailer 1.26
Ed Harrison wrote:
** Reply to message from Anders Johansson
on Tue, 13 Dec 2005 06:12:16 +0100 Which part of "you don't need it" don't you understand?
If you're not using SUSE software, please contact xcdroast or Mr. Schilling with such questions
You know, I have always appreciated your excellent help to this list. This is uncalled for. If xcdroast would write a DVD, then I would not have asked. So, let's assume that I have a SuSE 10.0 installation and I chose "Gnome" during installation and all went well--no errors.
In xcdroast (running as root since it was not compiled with non-root support) from the SuSE 10 DVD, in Create Cd>>Master Tracks>>Create session/image where I am supposed to be able to choose DVD as a Disc Type, there is no such choice--only various sizes of CDs.
Therefore, I am using software from SuSE and it doesn't work AND "I (obviously) DO need it", or something similar, to make it work.
I've used cdrecord on several distros (including S10) to burn CDs without problems (except for Belkin RW which seem alwasy troublesom), and growisofs to burn DVDs. So far as I can tell, many others have managed these feats too, so probably the software works. If you have some particular difficulties with those programs, then this is a good forum to discuss those problems. OTOH, if you need to ask questions about ProDVD, then pay for it and use the support you bought. Generally, I favour buying commercial software if it provides extra features you need, if the non-commercial software is too bug-ridden to be useful. Howerver, I think the latter doesn't applly to cdrecord or growisofs.
On Tuesday 13 December 2005 12:12 am, Anders Johansson wrote:
How do I add the ProDVD key to xcdroast? I can manually add it to /root/.xcdroast/xcdr.cfg, but it has no effect--even if I set it in the environment variable CDR_SECURITY> Which part of "you don't need it" don't you understand? If you're not using SUSE software, please contact xcdroast or Mr. Schilling with such questions
I'm using Mepis (Debian-based distro) and K3b burns DVD+Rs just fine. I am content to use K3b with the great results it delivers. However, in the quest for commands to use in a script, since K3b is just a user-friendly front end to various command line tools, I think the key is to analyze either K3b itself or perhaps documentation that is posted somewhere to discover what commands it issues when the various buttons are clicked. Bryan **************************************** Powered by Mepis Linux 3.3.1 KDE 3.3.2 KMail 1.7.2 This is a Microsoft-free computer Bryan S. Tyson bryantyson@earthlink.net ****************************************
Bryan S. Tyson wrote:
However, in the quest for commands to use in a script, since K3b is just a user-friendly front end to various command line tools, I think the key is to analyze either K3b itself or perhaps documentation that is posted somewhere to discover what commands it issues when the various buttons are clicked.
Or even, <shock> <horror>, read the man pages.
On Monday 12 December 2005 8:07 pm, Anders Johansson wrote:
In the output from k3b you can see the exact commands it runs, with parameters and everything.
How does one view this output? Thank you. Bryan **************************************** Powered by Mepis Linux 3.3.1 KDE 3.3.2 KMail 1.7.2 This is a Microsoft-free computer Bryan S. Tyson bryantyson@earthlink.net ****************************************
participants (7)
-
Anders Johansson
-
BandiPat
-
Bryan S. Tyson
-
Ed Harrison
-
John Summerfield
-
Ken Schneider
-
Paul W. Abrahams