RE: [SLE] Need help diagnosing hardware problem
Actually, I didn't, but I pulled the Video card out, vacuumed the slot, wiped the card connectors down with a rag, and re-inserted it.
sounds to me like you removed a pci card or recently installed one, and didnt seat it properly.
take out all the cards, wipe down the connectors, and firmly re insert them, that should do the trick?
Greg Wallace
The Monday 2006-10-16 at 19:19 -0500, Greg Wallace wrote:
1) The computer beeps twice and nothing happens. No bios screen comes up, no disk activity, nothing.
Check the docs on your BIOS to find out exactly what 2 beeps means .
What docs. I got zilch in the way of documentation with this Dell machine, and Dell tech support couldn't tell me what two beeps meant (actually, they took off on a tangent and didn't even try to answer that question, about what I've come to expect from their tech support).
Before doing anything else, like cleaning, testing this or that, replacing components, etc, you'd better find out what those beeps means in your system, because that will tell you at least the area of the problem.
The snag is that they are not standardized :-(
- -- Cheers, Carlos E. R.
I have no idea how to find this out. The Dell tech support took off in a completely different direction when I asked this question, basically ignoring my question about the 2 beeps. I also scoured the Dell website and found nothing. Greg Wallace -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com Steve Reilly Blog: http://72.227.4.163/ _____ Get your email and more, right on the new http://us.rd.yahoo.com/evt=42973/*http:/www.yahoo.com/preview Yahoo.com
On Tuesday 17 October 2006 07:01, Greg Wallace wrote:
Actually, I didn't, but I pulled the Video card out, vacuumed the slot, wiped the card connectors down with a rag, and re-inserted it.
sounds to me like you removed a pci card or recently installed one, and
didnt seat it properly.
take out all the cards, wipe down the connectors, and firmly re insert
them, that should do the trick?
Lots of cutted text: I recently got a machine i had to fix for a customer. It had almost the same problem, but it was failing with "probable CPU problem" I proceded by removing everything but the cpu . Mem, cards disks. EVERYTHING. And proceded by adding one thing at the time. First ram, then graphics, then disks, then card by card. I found the NIC being the culprit. As soon as i inserted it the box died on me again. Do it step by step. And make sure you power down between the steps. Some errors doesnt show on reboot, only on cold boot. Good luck. -- /Rikard ----------------------------------------------------------------------------- email : rikard.j@rikjoh.com web : http://www.rikjoh.com mob: : +46 (0)763 19 76 25 ------------------------ Public PGP fingerprint ---------------------------- < 15 28 DF 78 67 98 B2 16 1F D3 FD C5 59 D4 B6 78 46 1C EE 56 >
and the only card you have is video? did you try them all?
any of the connectors you have on the mother board that have wires going to them from the power supply need to be checked as well.
Rikard Johnels
Actually, I didn't, but I pulled the Video card out, vacuumed the slot, wiped the card connectors down with a rag, and re-inserted it.
sounds to me like you removed a pci card or recently installed one, and
didnt seat it properly.
take out all the cards, wipe down the connectors, and firmly re insert
them, that should do the trick?
Lots of cutted text: I recently got a machine i had to fix for a customer. It had almost the same problem, but it was failing with "probable CPU problem" I proceded by removing everything but the cpu . Mem, cards disks. EVERYTHING. And proceded by adding one thing at the time. First ram, then graphics, then disks, then card by card. I found the NIC being the culprit. As soon as i inserted it the box died on me again. Do it step by step. And make sure you power down between the steps. Some errors doesnt show on reboot, only on cold boot. Good luck. -- /Rikard ----------------------------------------------------------------------------- email : rikard.j@rikjoh.com web : http://www.rikjoh.com mob: : +46 (0)763 19 76 25 ------------------------ Public PGP fingerprint ---------------------------- < 15 28 DF 78 67 98 B2 16 1F D3 FD C5 59 D4 B6 78 46 1C EE 56 > Steve Reilly Blog: http://72.227.4.163/ --------------------------------- Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail.
On Tuesday, October 17, 2006 @ 8:36 AM, Steve Reilly wrote:
and the only card you have is video? did you try them all? any of the connectors you have on the mother board that have wires going to them from the power supply need to be checked as well.
I just have that one card and I cleaned and re-seated it. If the 4 diagnosis lights I discovered on the back of the computer don't tell me anything the next time it happens (assuming my cleaning the Video Card didn't fix it), then I'll start looking at some of the other options that have been suggested; i. e., check power supply, check all connections, check cmos battery, ...
Rikard Johnels
wrote: On Tuesday 17 October 2006 07:01, Greg Wallace wrote: Actually, I didn't, but I pulled the Video card out, vacuumed the slot, wiped the card connectors down with a rag, and re-inserted it.
sounds to me like you removed a pci card or recently installed one, and
didnt seat it properly.
take out all the cards, wipe down the connectors, and firmly re insert
them, that should do the trick?
Lots of cutted text:
I recently got a machine i had to fix for a customer. It had almost the same problem, but it was failing with "probable CPU problem" I proceded by removing everything but the cpu . Mem, cards disks. EVERYTHING. And proceded by adding one thing at the time. First ram, then graphics, then disks, then card by card. I found the NIC being the culprit. As soon as i inserted it the box died on me again.
I don't see any cards except the Video Card. Since I don't see a NIC card, I assume my Network is built-in. There is no card where I plug in my ethernet connector.
Do it step by step. And make sure you power down between the steps. Some errors doesnt show on reboot, only on cold boot.
Good luck.
-- /Rikard
Greg Wallace
On Tuesday, October 17, 2006 A 6:58 AM, Rikard Johnels wrote:
On Tuesday 17 October 2006 07:01, Greg Wallace wrote:
Actually, I didn't, but I pulled the Video card out, vacuumed the slot, wiped the card connectors down with a rag, and re-inserted it.
sounds to me like you removed a pci card or recently installed one, and
didnt seat it properly.
take out all the cards, wipe down the connectors, and firmly re insert
them, that should do the trick?
Lots of cutted text:
I recently got a machine i had to fix for a customer. It had almost the same problem, but it was failing with "probable CPU problem" I proceded by removing everything but the cpu . Mem, cards disks. EVERYTHING. And proceded by adding one thing at the time. First ram, then graphics, then disks, then card by card. I found the NIC being the culprit. As soon as i inserted it the box died on me again.
I think my Network is on-board. I only have 1 card in the machine (Video). The ethernet connection is into a slot built into the motherboard.
Do it step by step. And make sure you power down between the steps. Some errors doesnt show on reboot, only on cold boot.
Good luck.
-- /Rikard ---------------------------------------------------------------------------- - email : rikard.j@rikjoh.com web : http://www.rikjoh.com mob: : +46 (0)763 19 76 25 ------------------------ Public PGP fingerprint ---------------------------- < 15 28 DF 78 67 98 B2 16 1F D3 FD C5 59 D4 B6 78 46 1C EE 56 >
participants (3)
-
Greg Wallace
-
Rikard Johnels
-
Steve Reilly