[opensuse] Speed up images printing
I'm using openSUSE 10.2 and KDE 3.5.5 When I print some text, it's quick, but when I print some image (jpeg, tiff, gif, etc.) it takes several eternal minutes, sometimes hours. Right now, I'm printing a 317Kb image that runs for at least 10 min and it's not finish. Can I do something to improve the printing speed? -- Regards, Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 6/1/07, Lívio Cipriano
I'm using openSUSE 10.2 and KDE 3.5.5
When I print some text, it's quick, but when I print some image (jpeg, tiff, gif, etc.) it takes several eternal minutes, sometimes hours.
Right now, I'm printing a 317Kb image that runs for at least 10 min and it's not finish. Can I do something to improve the printing speed?
What program you print from? What kind of printer you have? How is it setup? -- Svetoslav Milenov (Sunny) Even the most advanced equipment in the hands of the ignorant is just a pile of scrap. N�����r��y隊Z)z{.�ﮞ˛���m�)z{.��+�Z+i�b�*'jW(�f�vǦj)h���Ǿ��i����� ��
On 1 June 2007 20:48, Sunny wrote:
What program you print from?
I'm printing from KDE. The 370Kb image was printed from Konqueror.
What kind of printer you have?
It's an HP LaserJet 5MP, it's an PostScript 2 printer
How is it setup?
I just configure CUPS with 2 queues : one as a raw printer, no filtering, and another as an HP LaserJet 5MP with the manufacture PPD. -- Regards, Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Friday 2007-06-01 at 23:12 +0100, Lívio Cipriano wrote:
On 1 June 2007 20:48, Sunny wrote:
What program you print from?
I'm printing from KDE. The 370Kb image was printed from Konqueror.
Then try printing from another app, for instance, OpenOffice, the same image. What is important is the number of pixels and the colour depth, not the size in bytes, by the way.
What kind of printer you have?
It's an HP LaserJet 5MP, it's an PostScript 2 printer
How is it setup?
I just configure CUPS with 2 queues : one as a raw printer, no filtering, and another as an HP LaserJet 5MP with the manufacture PPD.
And how is it connected, physically? How much memory do you have? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGYKDPtTMYHG2NR9URAis2AJ4ge4djTd2x2+lneakpt498oae1owCcDsWq MkX9ztC4pJv9RNzEVOLlp9Q= =Hu0M -----END PGP SIGNATURE-----
On 1 June 2007 23:42, Carlos E. R. wrote:
Then try printing from another app, for instance, OpenOffice, the same image.
That's true. OO seams to print images quicker. -- Regards, Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Fri, 2007-06-01 at 23:12 +0100, Lívio Cipriano wrote:
On 1 June 2007 20:48, Sunny wrote:
What program you print from?
I'm printing from KDE. The 370Kb image was printed from Konqueror.
What kind of printer you have?
It's an HP LaserJet 5MP, it's an PostScript 2 printer
How is it setup?
I just configure CUPS with 2 queues : one as a raw printer, no filtering, and another as an HP LaserJet 5MP with the manufacture PPD.
This most likely is because of not enough memory in the printer. I have the same problem with my HP laser but only on large graphic files. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 2 June 2007 04:47, Kenneth Schneider wrote:
I have the same problem with my HP laser but only on large graphic files.
I guess you are, partial, right. My printer has only 3Mb. But in Windows the pictures are printed more quickly, so, I guess, must exist a "tune" to improve the speed in Linux. -- Regards, Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Saturday 2007-06-02 at 10:52 +0100, Lívio Cipriano wrote:
On 2 June 2007 04:47, Kenneth Schneider wrote:
I have the same problem with my HP laser but only on large graphic files.
I guess you are, partial, right. My printer has only 3Mb.
But in Windows the pictures are printed more quickly, so, I guess, must exist a "tune" to improve the speed in Linux.
Depending on the program or the filter, you can tune for low memory printer. Point your browser to http://localhost:631/, select printers, then on you printer, go to "set printer options", and look around. If it doesn't accept your password, you need to add one using "lppasswd -g sys -a <user name>" Also, what type of cable/connector you use affects. If it is a classic parallel cable, you gain speed giving an IRQ to the interface, which by default it hasn't in Linux. For instance, in my "/etc/modprobe.conf.local" I have: options parport_pc io=0x378 irq=7 Obviously, you have to select the right parameters. If it uses the irq, you will see something like this in the file "/var/log/boot.msg" after reboot: <6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] <6>lp0: using parport0 (interrupt-driven). - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGYUI9tTMYHG2NR9URAqOaAJ9NtofGFRSINNyleh4xAptGYgXGNQCfS48w llEvVEVn1M7rdEJ/vkaB0pQ= =4kvC -----END PGP SIGNATURE-----
On 1 June 2007 23:12, Lívio Cipriano wrote:
On 1 June 2007 20:48, Sunny wrote:
What program you print from?
I'm printing from KDE. The 370Kb image was printed from Konqueror.
What kind of printer you have?
It's an HP LaserJet 5MP, it's an PostScript 2 printer
How is it setup?
I just configure CUPS with 2 queues : one as a raw printer, no filtering, and another as an HP LaserJet 5MP with the manufacture PPD.
-- Regards, Lívio Cipriano
I print the SELF TEST of my printer and I notice that has: Installed Personalities: PCL (94110823) POSTSCRIPT (95040353) So, I just configured my HP LaserJet 5MP as an PCL Printer, and the improvements in the printing speed of graphics were immediately. An image of 370Kb that yesterday took 15-20 min to print, now took 1-2 mins. Any explanation? -- Regards, Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sat, 2007-06-02 at 11:41 +0100, Lívio Cipriano wrote:
On 1 June 2007 23:12, Lívio Cipriano wrote:
I print the SELF TEST of my printer and I notice that has:
Installed Personalities: PCL (94110823) POSTSCRIPT (95040353)
So, I just configured my HP LaserJet 5MP as an PCL Printer, and the improvements in the printing speed of graphics were immediately. An image of 370Kb that yesterday took 15-20 min to print, now took 1-2 mins. Any explanation?
PCL is closer to the natural language of the printer whereas postscript has to go through an interpreter. Can you speak faster using your natural language or having to go through an interpreter first? -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Lívio Cipriano wrote:
On 1 June 2007 23:12, Lívio Cipriano wrote:
On 1 June 2007 20:48, Sunny wrote:
What program you print from? I'm printing from KDE. The 370Kb image was printed from Konqueror.
What kind of printer you have? It's an HP LaserJet 5MP, it's an PostScript 2 printer
How is it setup? I just configure CUPS with 2 queues : one as a raw printer, no filtering, and another as an HP LaserJet 5MP with the manufacture PPD.
-- Regards, Lívio Cipriano
I print the SELF TEST of my printer and I notice that has:
Installed Personalities: PCL (94110823) POSTSCRIPT (95040353)
So, I just configured my HP LaserJet 5MP as an PCL Printer, and the improvements in the printing speed of graphics were immediately. An image of 370Kb that yesterday took 15-20 min to print, now took 1-2 mins. Any explanation?
It looks like your printer does not have enough memory to handle the postscript file. The pcl version requires your computer to process the file and generate an image of the page, translate it to pcl, then send it to the printer where there is little processing. In postscript, it sends a postscript file (program), the printer executes the program, draws the image, then prints the files. Typically if you have a complex image and very little memory, it takes a long time. -- Joseph Loo jloo@acm.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Joseph Loo wrote:
Lívio Cipriano wrote:
On 1 June 2007 23:12, Lívio Cipriano wrote:
On 1 June 2007 20:48, Sunny wrote:
What program you print from? I'm printing from KDE. The 370Kb image was printed from Konqueror.
What kind of printer you have? It's an HP LaserJet 5MP, it's an PostScript 2 printer
How is it setup? I just configure CUPS with 2 queues : one as a raw printer, no filtering, and another as an HP LaserJet 5MP with the manufacture PPD.
-- Regards, Lívio Cipriano I print the SELF TEST of my printer and I notice that has:
Installed Personalities: PCL (94110823) POSTSCRIPT (95040353)
So, I just configured my HP LaserJet 5MP as an PCL Printer, and the improvements in the printing speed of graphics were immediately. An image of 370Kb that yesterday took 15-20 min to print, now took 1-2 mins. Any explanation?
It looks like your printer does not have enough memory to handle the postscript file. The pcl version requires your computer to process the file and generate an image of the page, translate it to pcl, then send it to the printer where there is little processing.
In postscript, it sends a postscript file (program), the printer executes the program, draws the image, then prints the files. Typically if you have a complex image and very little memory, it takes a long time.
Historically Postscript always has been rather inefficient at processing bitmap images. Generating rather large ASCII representations of the binary image info. If remember correctly PCL does represent binary as binary, resulting in much smaller filesizes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGYYj0asN0sSnLmgIRApDUAJ9fR345J/o8PY9Uaa/GqNjU1CZZ9gCdEu9J fMmh8WXGuE0EoEL7aKyrIa8= =1Zhe -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 2 June 2007 13:21, Joseph Loo wrote:
Lívio Cipriano wrote:
On 1 June 2007 23:12, Lívio Cipriano wrote:
On 1 June 2007 20:48, Sunny wrote:
What program you print from?
I'm printing from KDE. The 370Kb image was printed from Konqueror.
What kind of printer you have?
It's an HP LaserJet 5MP, it's an PostScript 2 printer
How is it setup?
I just configure CUPS with 2 queues : one as a raw printer, no filtering, and another as an HP LaserJet 5MP with the manufacture PPD.
-- Regards, Lívio Cipriano
I print the SELF TEST of my printer and I notice that has:
Installed Personalities: PCL (94110823) POSTSCRIPT (95040353)
So, I just configured my HP LaserJet 5MP as an PCL Printer, and the improvements in the printing speed of graphics were immediately. An image of 370Kb that yesterday took 15-20 min to print, now took 1-2 mins. Any explanation?
It looks like your printer does not have enough memory to handle the postscript file. The pcl version requires your computer to process the file and generate an image of the page, translate it to pcl, then send it to the printer where there is little processing.
I've 3Mb of memory. I know that is not much, for today's standards, but that is almost 10 times the size of the file sent to the printer... The only minus that detect, till now, for config my printer to PCL, is that the more gray images don't show so clearly as in PostScript.
In postscript, it sends a postscript file (program), the printer executes the program, draws the image, then prints the files. Typically if you have a complex image and very little memory, it takes a long time.
-- Joseph Loo jloo@acm.org
-- Regards, Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Lívio Cipriano wrote:
On 2 June 2007 13:21, Joseph Loo wrote:
On 1 June 2007 23:12, Lívio Cipriano wrote:
On 1 June 2007 20:48, Sunny wrote:
What program you print from? I'm printing from KDE. The 370Kb image was printed from Konqueror.
What kind of printer you have? It's an HP LaserJet 5MP, it's an PostScript 2 printer
How is it setup? I just configure CUPS with 2 queues : one as a raw printer, no filtering, and another as an HP LaserJet 5MP with the manufacture PPD.
-- Regards, Lívio Cipriano I print the SELF TEST of my printer and I notice that has:
Installed Personalities: PCL (94110823) POSTSCRIPT (95040353)
So, I just configured my HP LaserJet 5MP as an PCL Printer, and the improvements in the printing speed of graphics were immediately. An image of 370Kb that yesterday took 15-20 min to print, now took 1-2 mins. Any explanation? It looks like your printer does not have enough memory to handle the
Lívio Cipriano wrote: postscript file. The pcl version requires your computer to process the file and generate an image of the page, translate it to pcl, then send it to the printer where there is little processing.
I've 3Mb of memory. I know that is not much, for today's standards, but that is almost 10 times the size of the file sent to the printer...
The only minus that detect, till now, for config my printer to PCL, is that the more gray images don't show so clearly as in PostScript.
In postscript, it sends a postscript file (program), the printer executes the program, draws the image, then prints the files. Typically if you have a complex image and very little memory, it takes a long time.
-- Joseph Loo jloo@acm.org
When I had my postscript printer, I would send 2 MB files and it would take 25 to 30 minute to run. Theis was with 1.5 Mbytes. I moved to 76 Mbytes, it took about 3 minutes. I had a slow processor to. -- Joseph Loo jloo@acm.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 3 June 2007 14:41, Joseph Loo wrote:
When I had my postscript printer, I would send 2 MB files and it would take 25 to 30 minute to run. Theis was with 1.5 Mbytes. I moved to 76 Mbytes, it took about 3 minutes. I had a slow processor to.
I'll stick by the PCL config; by the moment... -- Regards, Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Sunday 2007-06-03 at 13:20 +0100, Lívio Cipriano wrote:
It looks like your printer does not have enough memory to handle the postscript file. The pcl version requires your computer to process the file and generate an image of the page, translate it to pcl, then send it to the printer where there is little processing.
I've 3Mb of memory. I know that is not much, for today's standards, but that is almost 10 times the size of the file sent to the printer...
Let me see; an 8*10 inches page at 1200 dots per inch, that's 115.2e6 pixels... calculate the memory needed. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGYwNXtTMYHG2NR9URAu2OAJ4p6s/59itF8ghCXptGcEieBp8dhwCcDCDK xjzAJ8iVxKZJcfCyAYJE3Bc= =ADOo -----END PGP SIGNATURE-----
On Sunday 03 June 2007 11:07, Carlos E. R. wrote:
The Sunday 2007-06-03 at 13:20 +0100, Lívio Cipriano wrote:
It looks like your printer does not have enough memory to handle the postscript file. The pcl version requires your computer to process the file and generate an image of the page, translate it to pcl, then send it to the printer where there is little processing.
I've 3Mb of memory. I know that is not much, for today's standards, but that is almost 10 times the size of the file sent to the printer...
Let me see; an 8*10 inches page at 1200 dots per inch, that's 115.2e6 pixels... calculate the memory needed.
1200 dots per inch? I thought we were talking about a home or office printer. 600dpi is more typical for today's laser printers. Also, the imageable area is typically reduced by about .25 in. on each edge. Furthermore, keep in mind that these are one-bit pixels. So a reasonable calculation of the number of frame buffer bytes for an 8.5 x 11 page would be: 8 x 10.5 x 600 x 600 / 8 = 3,780,000 bytes ~ 3.6 MB Randall Schulz -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Sunday 2007-06-03 at 14:02 -0700, Randall R Schulz wrote:
Let me see; an 8*10 inches page at 1200 dots per inch, that's 115.2e6 pixels... calculate the memory needed.
1200 dots per inch? I thought we were talking about a home or office printer. 600dpi is more typical for today's laser printers.
I like worst case gross-overestimates :-P
Also, the imageable area is typically reduced by about .25 in. on each edge.
Furthermore, keep in mind that these are one-bit pixels.
I left that as a exercise to the reader :-p
So a reasonable calculation of the number of frame buffer bytes for an 8.5 x 11 page would be:
8 x 10.5 x 600 x 600 / 8 = 3,780,000 bytes ~ 3.6 MB
And his printer has 3MB, so that's not enough to print full page bitmaps, because you need space for the original ps, the process, perhaps converting color to gray, the result... and if it prints, it will be slow; I guess it has to go by bands. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGY1sqtTMYHG2NR9URAhOpAJ4r2DTkWpIJbmaX/6gWspuUqrYh6wCfUXqO TldKc4Z/oluLuQOY4tfdmPc= =wjRu -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Randall R Schulz wrote:
On Sunday 03 June 2007 11:07, Carlos E. R. wrote:
It looks like your printer does not have enough memory to handle the postscript file. The pcl version requires your computer to process the file and generate an image of the page, translate it to pcl, then send it to the printer where there is little processing. I've 3Mb of memory. I know that is not much, for today's standards, but that is almost 10 times the size of the file sent to the printer... Let me see; an 8*10 inches page at 1200 dots per inch, that's 115.2e6
The Sunday 2007-06-03 at 13:20 +0100, Lívio Cipriano wrote: pixels... calculate the memory needed.
1200 dots per inch? I thought we were talking about a home or office printer. 600dpi is more typical for today's laser printers.
Also, the imageable area is typically reduced by about .25 in. on each edge.
Furthermore, keep in mind that these are one-bit pixels.
So a reasonable calculation of the number of frame buffer bytes for an 8.5 x 11 page would be:
8 x 10.5 x 600 x 600 / 8 = 3,780,000 bytes ~ 3.6 MB
Randall Schulz You forget the entire sheet is treated as a complete image. Another thing, you forget it is not black and white rather a grey therefore there are more than a single pixel associated with a dot.
-- Joseph Loo jloo@acm.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 04 June 2007 20:24, Joseph Loo wrote:
Randall R Schulz wrote:
...
You forget the entire sheet is treated as a complete image. Another thing, you forget it is not black and white rather a grey therefore there are more than a single pixel associated with a dot.
a) I did not assume banding. b) Laser printers either make a dot or they don't. No laser printer has gray-scale printing. That's what half-toning is for. This does not include photographic printers, as I understand it.
-- Joseph Loo
Randall Schulz -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Randall R Schulz wrote:
On Monday 04 June 2007 20:24, Joseph Loo wrote:
... You forget the entire sheet is treated as a complete image. Another
Randall R Schulz wrote: thing, you forget it is not black and white rather a grey therefore there are more than a single pixel associated with a dot.
a) I did not assume banding. b) Laser printers either make a dot or they don't. No laser printer has gray-scale printing. That's what half-toning is for. This does not include photographic printers, as I understand it.
-- Joseph Loo
Randall Schulz You have to be careful, because some f the dots are overlapped to give you different levels of grey. It seems that HP is famous for doing that. I do not hink it applies to your model, but the color printer they definietly do that.
As fro the banding, guess what you have to do to draw the banding, you have to process he entire program for each band in order to generate the image. If you have enough room in memory, you just have to process the program once. versus the number of bands associated with the pringer. -- Joseph Loo jloo@acm.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Hello, On Jun 1 23:12 Lívio Cipriano wrote (shortened):
It's an HP LaserJet 5MP, it's an PostScript 2 printer
http://en.opensuse.org/SDB:Purchasing_a_Printer_and_Compatibility "Technical Information" http://en.opensuse.org/SDB:Using_Your_Own_Filters_to_Print_with_CUPS "Optional PCL Printing on PostScript+PCL Printers" -------------------------------------------------------------------- The easiest approach consists of creating an additional queue for a PostScript+PCL printer. This queue always produces PCL data by using a PPD file for a compatible PCL printer. -------------------------------------------------------------------- E.g. use /usr/share/cups/model/Generic/PCL_5e_Printer-ljet4.ppd.gz "Generic PCL 5e Printer Foomatic/ljet4 (recommended)" Kind Regards Johannes Meixner -- SUSE LINUX Products GmbH, Maxfeldstrasse 5, 90409 Nuernberg, Germany AG Nuernberg, HRB 16746, GF: Markus Rex
On 5 June 2007 11:32, Johannes Meixner wrote:
The easiest approach consists of creating an additional queue for a PostScript+PCL printer. This queue always produces PCL data by using a PPD file for a compatible PCL printer.
Thanks. Your info were most helpful. The only, slight, minus, is that the fine gray resolution is not as good as in the PS2 emulation. For instance, printing the YaST test page without photo, with the PCL5e PPD, the 6,25% gray circles don't show as visible as with the PS2 PPD. -- Regards, Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Hello, On Jun 5 18:21 Lívio Cipriano wrote (shortened):
The only, slight, minus, is that the fine gray resolution is not as good as in the PS2 emulation.
Feel free to try out any PPD file for generic PCL printers: /usr/share/cups/model/Generic/PCL_* In particular try /usr/share/cups/model/Generic/PCL_5e_Printer-lj4dith.ppd.gz "Generic PCL 5e Printer Foomatic/lj4dith" But Floyd-Steinberg dithering requires more pinter memory because when I print into a file it is about 1.5 times bigger when I use lj4dith instead of ljet4. See /usr/share/doc/packages/ghostscript-library/catalog.devices for short descriptions about the Ghostscript drivers. It depends on your particular printer model which particular kind of PCL your printer understands at all and/or which particular kind of PCL results the best printout which again depends on what you like most (e.g. what looks best for text and business graphics printing may be not best for photos and vice versa). Usually your printer shouldn't explode if unsuitable PCL is sent to it but of course I/we won't be liable for damages. Regarding PostScript: Only 3 MB is very short for PostScript. Think about to enhance the printer's memory. Perhaps you could get cheap second-hand printer memory? Kind Regards Johannes Meixner -- SUSE LINUX Products GmbH, Maxfeldstrasse 5, 90409 Nuernberg, Germany AG Nuernberg, HRB 16746, GF: Markus Rex
On 6 June 2007 09:55, Johannes Meixner wrote:
Regarding PostScript: Only 3 MB is very short for PostScript. Think about to enhance the printer's memory. Perhaps you could get cheap second-hand printer memory?
Hi Johannes, In fact I think that is the best solution. I've my HP LaserJet 5MP for 12 years and it's a great printer. Only now I'm contemplating the hypotheses to by a new color duplex printer. -- Regards, Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (8)
-
Carlos E. R. -
G T Smith -
Johannes Meixner -
Joseph Loo -
Kenneth Schneider -
Lívio Cipriano -
Randall R Schulz -
Sunny