NetworkManager connection problem (no default route)
Hi, the new networkManager in SUSE 10.1 does not work for me. When I click on the cable connection in kNetworkManager there are two popups telling me that it disconnects (previous connections??) and connects immediately afterwards. The other popup showing the activation status displays "Activation status: IP configuration started" for a while, switches to "IP configuration requested" and afterwards "apply IP configuration". It seems to be fine then (connection established: eth1), but there is no default route: Destination Gateway Genmask Flags Metric Ref Use Iface link-local * 255.255.0.0 U 0 0 0 eth1 loopback * 255.0.0.0 U 0 0 0 lo The traditional ifup-method works without any problems. Anybody can help me here? The log output is: May 21 17:16:07 blizzmo SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. May 21 17:16:07 blizzmo SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... May 21 17:16:07 blizzmo SuSEfirewall2: batch committing... May 21 17:16:07 blizzmo SuSEfirewall2: Firewall rules successfully set May 21 17:16:07 blizzmo dhclient: Internet Systems Consortium DHCP Client V3.0.3 May 21 17:16:07 blizzmo dhclient: Copyright 2004-2005 Internet Systems Consortium. May 21 17:16:07 blizzmo dhclient: All rights reserved. May 21 17:16:07 blizzmo dhclient: For info, please visit http://www.isc.org/products/DHCP May 21 17:16:07 blizzmo dhclient: Usage: dhclient [-1dqr] [-nwx] [-p <port>] [-s server] May 21 17:16:07 blizzmo dhclient: [-cf config-file] [-lf lease-file][-pf pid-file] [-e VAR=val] May 21 17:16:07 blizzmo dhclient: [-sf script-file] [interface] May 21 17:16:07 blizzmo dhclient: May 21 17:16:07 blizzmo dhclient: If you did not get this software from ftp.isc.org, please May 21 17:16:07 blizzmo dhclient: get the latest from ftp.isc.org and install that before May 21 17:16:07 blizzmo dhclient: requesting help. May 21 17:16:07 blizzmo dhclient: May 21 17:16:07 blizzmo dhclient: If you did get this software from ftp.isc.org and have not May 21 17:16:07 blizzmo dhclient: yet read the README, please read it before requesting help. May 21 17:16:07 blizzmo dhclient: If you intend to request help from the dhcp-server@isc.org May 21 17:16:07 blizzmo dhclient: mailing list, please read the section on the README about May 21 17:16:07 blizzmo dhclient: submitting bug reports and requests for help. May 21 17:16:07 blizzmo dhclient: May 21 17:16:07 blizzmo dhclient: Please do not under any circumstances send requests for May 21 17:16:07 blizzmo dhclient: help directly to the authors of this software - please May 21 17:16:07 blizzmo dhclient: send them to the appropriate mailing list as described in May 21 17:16:07 blizzmo dhclient: the README file. May 21 17:16:07 blizzmo dhclient: May 21 17:16:07 blizzmo dhclient: exiting. May 21 17:16:07 blizzmo dhcdbd: Unrequested down ?:3 May 21 17:17:09 blizzmo SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. May 21 17:17:09 blizzmo SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... May 21 17:17:09 blizzmo SuSEfirewall2: batch committing... May 21 17:17:09 blizzmo SuSEfirewall2: Firewall rules successfully set May 21 17:17:18 blizzmo kernel: eth1: no IPv6 routers present Best regards, David -- David Geiger info@david-geiger.de
On Sun, 2006-05-21 at 17:19 +0200, David Geiger wrote:
Hi,
the new networkManager in SUSE 10.1 does not work for me. When I click on the cable connection in kNetworkManager there are two popups telling me that it disconnects (previous connections??) and connects immediately afterwards. The other popup showing the activation status displays "Activation status: IP configuration started" for a while, switches to "IP configuration requested" and afterwards "apply IP configuration". It seems to be fine then (connection established: eth1), but there is no default route:
Destination Gateway Genmask Flags Metric Ref Use Iface link-local * 255.255.0.0 U 0 0 0 eth1 loopback * 255.0.0.0 U 0 0 0 lo
The traditional ifup-method works without any problems. Anybody can help me here?
First make sure that the DHCP server is setup correctly, would expect it is since the connection works with ifup. This is info that needs to be supplied when you open a bugzilla request. Which is the next step. I too am having problems using NetworkManager with my wireless and have an open bug report. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998
Am Sonntag, 21. Mai 2006 19:11 schrieb Ken Schneider:
First make sure that the DHCP server is setup correctly, would expect it is since the connection works with ifup. This is info that needs to be supplied when you open a bugzilla request. Which is the next step. I too am having problems using NetworkManager with my wireless and have an open bug report.
You're right. :) Have a look at https://bugzilla.novell.com/show_bug.cgi?id=177443 Can't find any updated package, but deleting the AUTO-String solves the issue so far. Regards, David -- David Geiger info@david-geiger.de
participants (2)
-
David Geiger -
Ken Schneider