[opensuse] Is there an opensource equivalent of route sentry?
Hi, I still haven't succeeded in routing my local and international accounts but Route Sentry apparently performs just that. Unfortunately it's only available for windows. Does somebody know of an open source linux equivalent? Thanks Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
Hi, I still haven't succeeded in routing my local and international accounts but Route Sentry apparently performs just that. Unfortunately it's only available for windows. Does somebody know of an open source linux equivalent?
Hi Dave, it looks like "Route Sentry" is a sort of traffic director? What is it you expect it to do for you? Using two ADSL links is no problem under Linux. /Per -- Per Jessen, Zürich (7.9°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/05/2009 11:20 AM, Per Jessen wrote:
Dave Plater wrote:
Hi, I still haven't succeeded in routing my local and international accounts but Route Sentry apparently performs just that. Unfortunately it's only available for windows. Does somebody know of an open source linux equivalent?
Hi Dave,
it looks like "Route Sentry" is a sort of traffic director? What is it you expect it to do for you? Using two ADSL links is no problem under Linux.
/Per
I've set up two pppoe dsl devices, one for local internet traffic - 41.0.0.0 to 41.96.0.0 and 192.0.0.0/8 (not quite sure how to specify the 41 route) and either eth0 or dsl1 for all other internet traffic. I've played around with /etc/sysconfig/network/routes but I can't get it right. Thanks Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
On 11/05/2009 11:20 AM, Per Jessen wrote:
Dave Plater wrote:
Hi, I still haven't succeeded in routing my local and international accounts but Route Sentry apparently performs just that. Unfortunately it's only available for windows. Does somebody know of an open source linux equivalent?
Hi Dave,
it looks like "Route Sentry" is a sort of traffic director? What is it you expect it to do for you? Using two ADSL links is no problem under Linux.
/Per
I've set up two pppoe dsl devices, one for local internet traffic - 41.0.0.0 to 41.96.0.0 and 192.0.0.0/8 (not quite sure how to specify the 41 route)
So all traffic to those addresses should go via dsl0 ? I think the 41 routes would be: 41.0.0.0.0/11 (41.0.0.0 - 41.31.255.255) 41.32.0.0.0/11 (41.32.0.0 - 41.63.255.255) 41.64.0.0.0/11 (41.64.0.0 - 41.95.255.255) 41.96.0.0/16 (41.96.0.0 - 41.96.255.255) It's a rough guess, I'm no expert at subnet masks.
and either eth0 or dsl1 for all other internet traffic. I've played around with /etc/sysconfig/network/routes but I can't get it right. Thanks
Assuming your DSL links are up all the time, you could just make them static routes. If not, I think you need something like /etc/sysconfig/network/ifcfg-dslX.route, which will establish the routes when the interface is available. /Per -- Per Jessen, Zürich (7.9°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/05/2009 12:02 PM, Per Jessen wrote:
Dave Plater wrote:
On 11/05/2009 11:20 AM, Per Jessen wrote:
Dave Plater wrote:
Hi, I still haven't succeeded in routing my local and international accounts but Route Sentry apparently performs just that. Unfortunately it's only available for windows. Does somebody know of an open source linux equivalent?
Hi Dave,
it looks like "Route Sentry" is a sort of traffic director? What is it you expect it to do for you? Using two ADSL links is no problem under Linux.
/Per
I've set up two pppoe dsl devices, one for local internet traffic - 41.0.0.0 to 41.96.0.0 and 192.0.0.0/8 (not quite sure how to specify the 41 route)
So all traffic to those addresses should go via dsl0 ? I think the 41 routes would be:
41.0.0.0.0/11 (41.0.0.0 - 41.31.255.255) 41.32.0.0.0/11 (41.32.0.0 - 41.63.255.255) 41.64.0.0.0/11 (41.64.0.0 - 41.95.255.255) 41.96.0.0/16 (41.96.0.0 - 41.96.255.255)
It's a rough guess, I'm no expert at subnet masks.
and either eth0 or dsl1 for all other internet traffic. I've played around with /etc/sysconfig/network/routes but I can't get it right. Thanks
Assuming your DSL links are up all the time, you could just make them static routes. If not, I think you need something like /etc/sysconfig/network/ifcfg-dslX.route, which will establish the routes when the interface is available.
/Per
I didn't know of ifcfg-dsl0.route, I tried ifroute-dsl0 but didn't have any success. I am assuming that I need to only have the default route in routes and the specific dsl0 routes in ifcfg-dsl0.route. Thanks Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
and either eth0 or dsl1 for all other internet traffic. I've played around with /etc/sysconfig/network/routes but I can't get it right. Thanks
Assuming your DSL links are up all the time, you could just make them static routes. If not, I think you need something like /etc/sysconfig/network/ifcfg-dslX.route, which will establish the routes when the interface is available.
/Per
I didn't know of ifcfg-dsl0.route, I tried ifroute-dsl0 but didn't have any success.
Ah, you're right, it is 'ifroute-dsl0', sorry. I can never remember those names.
I am assuming that I need to only have the default route in routes and the specific dsl0 routes in ifcfg-dsl0.route.
If you're letting dsl1 (international) set your default route, you don't need a default route in the config. /Per -- Per Jessen, Zürich (9.1°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/05/2009 01:19 PM, Per Jessen wrote:
Dave Plater wrote:
and either eth0 or dsl1 for all other internet traffic. I've played around with /etc/sysconfig/network/routes but I can't get it right. Thanks
Assuming your DSL links are up all the time, you could just make them static routes. If not, I think you need something like /etc/sysconfig/network/ifcfg-dslX.route, which will establish the routes when the interface is available.
/Per
I didn't know of ifcfg-dsl0.route, I tried ifroute-dsl0 but didn't have any success.
Ah, you're right, it is 'ifroute-dsl0', sorry. I can never remember those names.
I am assuming that I need to only have the default route in routes and the specific dsl0 routes in ifcfg-dsl0.route.
If you're letting dsl1 (international) set your default route, you don't need a default route in the config.
/Per
Whatever I do the last interface started dsl1 takes all of the traffic. If I stop dsl1 then dsl0 takes over as the default route and I have to either start dsl1 or stop dsl0. This is my ifroute-dsl0 : 41.0.0.0/11 41.32.0.0/11 41.64.0.0/11 41.96.0.0/16 196.0.0.0/8 It's the same format as ifroute-lo which existed previously. Thanks Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
Whatever I do the last interface started dsl1 takes all of the traffic. If I stop dsl1 then dsl0 takes over as the default route and I have to either start dsl1 or stop dsl0. This is my ifroute-dsl0 : 41.0.0.0/11 41.32.0.0/11 41.64.0.0/11 41.96.0.0/16 196.0.0.0/8 It's the same format as ifroute-lo which existed previously.
How do you want your default to be set: dsl1 dsl0 | default route -----------+--------------- down down | ? down up | ? up down | ? up up | ? If you enable defaultroute (ppp-option) on both interfaces, whoever comes up last, will get it. /Per -- Per Jessen, Zürich (9.8°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/05/2009 02:43 PM, Per Jessen wrote:
Dave Plater wrote:
Whatever I do the last interface started dsl1 takes all of the traffic. If I stop dsl1 then dsl0 takes over as the default route and I have to either start dsl1 or stop dsl0. This is my ifroute-dsl0 : 41.0.0.0/11 41.32.0.0/11 41.64.0.0/11 41.96.0.0/16 196.0.0.0/8 It's the same format as ifroute-lo which existed previously.
How do you want your default to be set:
dsl1 dsl0 | default route -----------+--------------- down down | ? down up | ? up down | ? up up | ?
If you enable defaultroute (ppp-option) on both interfaces, whoever comes up last, will get it.
/Per
The only place with a default route specified that I can see is eth0 and if I use yast network settings I can only set the default route for eth0 which is the address of the adsl router. Regards Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
How do you want your default to be set:
dsl1 dsl0 | default route -----------+--------------- down down | ? down up | ? up down | ? up up | ?
If you enable defaultroute (ppp-option) on both interfaces, whoever comes up last, will get it.
/Per
The only place with a default route specified that I can see is eth0 and if I use yast network settings I can only set the default route for eth0 which is the address of the adsl router.
My guess is that your ppp options also contain a 'defaultroute' statement, probably on both devices. You'll find these in /etc/ppp/ - I think you can have device-specific option by using options.device. You can use 'nodefaultroute' to disable changing of the default route. /Per -- Per Jessen, Zürich (9.6°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/05/2009 03:25 PM, Per Jessen wrote:
Dave Plater wrote:
How do you want your default to be set:
dsl1 dsl0 | default route -----------+--------------- down down | ? down up | ? up down | ? up up | ?
If you enable defaultroute (ppp-option) on both interfaces, whoever comes up last, will get it.
/Per
The only place with a default route specified that I can see is eth0 and if I use yast network settings I can only set the default route for eth0 which is the address of the adsl router.
My guess is that your ppp options also contain a 'defaultroute' statement, probably on both devices. You'll find these in /etc/ppp/ - I think you can have device-specific option by using options.device. You can use 'nodefaultroute' to disable changing of the default route.
/Per
Tried 'nodefaultroute' and no joy. I may have mislead you a bit, it's the default device that dsl1 becomes. Here's the output from ip route ls when dsl0 is up. :- # ip route ls 41.185.102.1 dev dsl0 proto kernel scope link src 41.185.102.111 10.0.0.0/24 dev eth0 proto kernel scope link src 10.0.0.54 169.254.0.0/16 dev eth0 scope link 127.0.0.0/8 dev lo scope link default dev dsl0 scope link Regards Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
Tried 'nodefaultroute' and no joy. I may have mislead you a bit,
Ditto :-) - when you're using pppoe, the options are probably in /etc/ppp/pppoe.options - or something like that. Or maybe they're configurable via yast?
it's the default device that dsl1 becomes. Here's the output from ip route ls when dsl0 is up. :- # ip route ls 41.185.102.1 dev dsl0 proto kernel scope link src 41.185.102.111 10.0.0.0/24 dev eth0 proto kernel scope link src 10.0.0.54 169.254.0.0/16 dev eth0 scope link 127.0.0.0/8 dev lo scope link default dev dsl0 scope link
Looks good I would say. /Per -- Per Jessen, Zürich (9.9°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Per Jessen wrote:
Dave Plater wrote:
Tried 'nodefaultroute' and no joy. I may have mislead you a bit,
Ditto :-) - when you're using pppoe, the options are probably in /etc/ppp/pppoe.options - or something like that. Or maybe they're configurable via yast?
Okay, just read your previous posting on that topic, and I've also just checked YaST on my own box. YaST doesn't seem to allow for mulitple ppp device with different options, but /etc/sysconfig/network/ifcfg-dslX does. Try adding 'nodefaultroute' to PPPD_OPTIONS for the connection where you never want the default route. /Per -- Per Jessen, Zürich (10.1°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/05/2009 04:03 PM, Per Jessen wrote:
Per Jessen wrote:
Dave Plater wrote:
Tried 'nodefaultroute' and no joy. I may have mislead you a bit,
Ditto :-) - when you're using pppoe, the options are probably in /etc/ppp/pppoe.options - or something like that. Or maybe they're configurable via yast?
Okay, just read your previous posting on that topic, and I've also just checked YaST on my own box. YaST doesn't seem to allow for mulitple ppp device with different options, but /etc/sysconfig/network/ifcfg-dslX does. Try adding 'nodefaultroute' to PPPD_OPTIONS for the connection where you never want the default route.
/Per
PPPD_OPTIONS='nodefaultroute' prevents dsl0 from staying up at all. There must be a way of doing this but I can only spend so much time. If route sentry can do it on windows (route sentry was recommended by my ip for this exact purpose. Thanks Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
On 11/05/2009 04:03 PM, Per Jessen wrote:
Okay, just read your previous posting on that topic, and I've also just checked YaST on my own box. YaST doesn't seem to allow for mulitple ppp device with different options, but /etc/sysconfig/network/ifcfg-dslX does. Try adding 'nodefaultroute' to PPPD_OPTIONS for the connection where you never want the default route.
/Per
PPPD_OPTIONS='nodefaultroute' prevents dsl0 from staying up at all.
What happens? Are there any error messages in the log? 'nodefaultroute' has no influence on the sttaus of the link, so something else obviously went wrong.
There must be a way of doing this but I can only spend so much time.
Of course there is a way of doing it - but it does require some configuration and some trial and error when the exact configuration is not known beforehand. /Per -- Per Jessen, Zürich (7.0°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/05/2009 07:48 PM, Per Jessen wrote:
Dave Plater wrote:
On 11/05/2009 04:03 PM, Per Jessen wrote:
Okay, just read your previous posting on that topic, and I've also just checked YaST on my own box. YaST doesn't seem to allow for mulitple ppp device with different options, but /etc/sysconfig/network/ifcfg-dslX does. Try adding 'nodefaultroute' to PPPD_OPTIONS for the connection where you never want the default route.
/Per
PPPD_OPTIONS='nodefaultroute' prevents dsl0 from staying up at all.
What happens? Are there any error messages in the log? 'nodefaultroute' has no influence on the sttaus of the link, so something else obviously went wrong.
There must be a way of doing this but I can only spend so much time.
Of course there is a way of doing it - but it does require some configuration and some trial and error when the exact configuration is not known beforehand.
/Per
This is all the log says with nodefaultroute:- Nov 6 12:44:07 Arbuthnot ifup: dsl0 name: DSL Connection Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin rp-pppoe.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5 Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin passwordfd.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: defaultroute option is disabled Nov 6 12:44:07 Arbuthnot ifup-ppp: interface dsl0 is up Nov 6 12:44:07 Arbuthnot SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 6 12:44:07 Arbuthnot SuSEfirewall2: using default zone 'ext' for interface eth0 Nov 6 12:44:07 Arbuthnot SuSEfirewall2: Warning: config 'samba-server' not available Nov 6 12:44:07 Arbuthnot SuSEfirewall2: batch committing... Nov 6 12:44:07 Arbuthnot SuSEfirewall2: Firewall rules successfully set And this is what is says without nodefaultroute :- Nov 6 12:50:18 Arbuthnot ifup: dsl0 name: DSL Connection Nov 6 12:50:18 Arbuthnot ifup-ppp: interface dsl0 is up Nov 6 12:50:18 Arbuthnot pppd[30516]: Plugin rp-pppoe.so loaded. Nov 6 12:50:18 Arbuthnot pppd[30516]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5 Nov 6 12:50:18 Arbuthnot pppd[30516]: Plugin passwordfd.so loaded. Nov 6 12:50:18 Arbuthnot pppd[30516]: pppd 2.4.5 started by root, uid 0 Nov 6 12:50:18 Arbuthnot pppd[30516]: Interface eth0 has MTU of 1492 -- should be at least 1500. Nov 6 12:50:18 Arbuthnot pppd[30516]: This may cause serious connection problems. Nov 6 12:50:18 Arbuthnot pppd[30516]: PPP session is 48352 Nov 6 12:50:18 Arbuthnot kernel: [ 5046.280777] NET: Registered protocol family 24 Nov 6 12:50:18 Arbuthnot pppd[30516]: Connected to 00:1e:13:09:db:79 via interface eth0 Nov 6 12:50:18 Arbuthnot kernel: [ 5046.288518] ppp0 renamed to dsl0 by pppd [30516] Nov 6 12:50:18 Arbuthnot pppd[30516]: Renamed interface ppp0 to dsl0 Nov 6 12:50:18 Arbuthnot pppd[30516]: Using interface dsl0 Nov 6 12:50:18 Arbuthnot pppd[30516]: Connect: dsl0 <--> eth0 Nov 6 12:50:18 Arbuthnot SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 6 12:50:18 Arbuthnot SuSEfirewall2: Warning: config 'samba-server' not available Nov 6 12:50:18 Arbuthnot SuSEfirewall2: batch committing... Nov 6 12:50:18 Arbuthnot SuSEfirewall2: Firewall rules successfully set Nov 6 12:50:20 Arbuthnot pppd[30516]: PAP authentication succeeded Nov 6 12:50:20 Arbuthnot pppd[30516]: peer from calling number 00:1E:13:09:DB:79 authorized Nov 6 12:50:20 Arbuthnot pppd[30516]: replacing old default route to eth0 [10.0.0.2] Nov 6 12:50:20 Arbuthnot pppd[30516]: local IP address 41.185.102.101 Nov 6 12:50:20 Arbuthnot pppd[30516]: remote IP address 41.185.102.1 Nov 6 12:50:20 Arbuthnot pppd[30516]: primary DNS address 196.220.59.188 Nov 6 12:50:20 Arbuthnot pppd[30516]: secondary DNS address 196.220.59.189 Nov 6 12:50:20 Arbuthnot dns-resolver: ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched... Nov 6 12:50:20 Arbuthnot dns-resolver: You can find my version in /etc/resolv.conf.netconfig Nov 6 12:50:21 Arbuthnot ip-up: ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched... Nov 6 12:50:21 Arbuthnot ip-up: You can find my version in /etc/resolv.conf.netconfig ... Nov 6 12:50:21 Arbuthnot SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Nov 6 12:50:21 Arbuthnot ip-up: SuSEfirewall2: Warning: config 'samba-server' not available Nov 6 12:50:21 Arbuthnot SuSEfirewall2: Warning: config 'samba-server' not available Nov 6 12:50:21 Arbuthnot ip-up: WARNING: All config files need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Nov 6 12:50:21 Arbuthnot ip-up: WARNING: All config files need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Nov 6 12:50:21 Arbuthnot ip-up: WARNING: All config files need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Nov 6 12:50:21 Arbuthnot ip-up: WARNING: All config files need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Nov 6 12:50:21 Arbuthnot ip-up: WARNING: All config files need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Nov 6 12:50:21 Arbuthnot ip-up: WARNING: All config files need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Nov 6 12:50:21 Arbuthnot SuSEfirewall2: batch committing... Nov 6 12:50:21 Arbuthnot SuSEfirewall2: Firewall rules successfully set Nov 6 12:50:21 Arbuthnot pppd[30516]: Script /etc/ppp/ip-up finished (pid 30685), status = 0x0 So there's no clue that I can see. Regards Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
This is all the log says with nodefaultroute:- Nov 6 12:44:07 Arbuthnot ifup: dsl0 name: DSL Connection Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin rp-pppoe.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5 Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin passwordfd.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: defaultroute option is disabled
Good.
Nov 6 12:44:07 Arbuthnot ifup-ppp: interface dsl0 is up
Good. But you said the interface doesn't stay up? /Per -- Per Jessen, Zürich (8.1°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/06/2009 11:38 AM, Per Jessen wrote:
Dave Plater wrote:
This is all the log says with nodefaultroute:- Nov 6 12:44:07 Arbuthnot ifup: dsl0 name: DSL Connection Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin rp-pppoe.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5 Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin passwordfd.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: defaultroute option is disabled
Good.
Nov 6 12:44:07 Arbuthnot ifup-ppp: interface dsl0 is up
Good. But you said the interface doesn't stay up?
/Per
Although the log doesn't say anything, it dies silently as soon as it's up. By the way the routing table works with my wireless card wlan0 and all local sites are routed to it but unfortunately my motherboard died and I'm typing this from another computer that I put my hard drive in and I can't install the wireless card as it might mess up their vista. Regards Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Dave Plater wrote:
On 11/06/2009 11:38 AM, Per Jessen wrote:
Dave Plater wrote:
This is all the log says with nodefaultroute:- Nov 6 12:44:07 Arbuthnot ifup: dsl0 name: DSL Connection Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin rp-pppoe.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5 Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin passwordfd.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: defaultroute option is disabled
Good.
Nov 6 12:44:07 Arbuthnot ifup-ppp: interface dsl0 is up
Good. But you said the interface doesn't stay up?
/Per
Although the log doesn't say anything, it dies silently as soon as it's up.
Hmmm, judging from the log it is also looks as if it it never got an IP address assigned etc. I wonder if PPPD_OPTIONS overrides all the pppd options ... AFAIK, the main pppd options are from /etc/ppp/options, but I had expected smpppd to consider PPPD_OPTIONS as an override, and combine them with the default. I'm pretty certain the key thing here is getting your two pppd daemons started, but each with the right set of options. /Per -- Per Jessen, Zürich (8.1°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/06/2009 11:38 AM, Per Jessen wrote:
Dave Plater wrote:
This is all the log says with nodefaultroute:- Nov 6 12:44:07 Arbuthnot ifup: dsl0 name: DSL Connection Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin rp-pppoe.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5 Nov 6 12:44:07 Arbuthnot pppd[28092]: Plugin passwordfd.so loaded. Nov 6 12:44:07 Arbuthnot pppd[28092]: defaultroute option is disabled
Good.
Nov 6 12:44:07 Arbuthnot ifup-ppp: interface dsl0 is up
Good. But you said the interface doesn't stay up?
/Per
Hi, just to let everybody know that I've solved my international and local internet routing dilemma. I discovered rp-pppoe and installed it, setup a pppoe connection for my local account and then discovered that when it (ppp0) was up it didn't become the default device so I used ip route add to "address range I want routed through ppp0" dev ppp0 to add all the address ranges I wanted to go through ppp0 and with the use of wireshark tested it and hey presto my local (South African) internet addresses were routed through my local only account and international traffic used eth0 through the international account. I'm still not sure how to get this to all happen automatically but I've made a script so far to add the routes. Thanks Per for your help Regards Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 05/11/09 06:09, Dave Plater wrote:
Hi, I still haven't succeeded in routing my local and international accounts but Route Sentry apparently performs just that. Unfortunately it's only available for windows. Does somebody know of an open source linux equivalent?
See http://www.shorewall.net/MultiISP.html -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/05/2009 12:18 PM, Cristian Rodríguez wrote:
On 05/11/09 06:09, Dave Plater wrote:
Hi, I still haven't succeeded in routing my local and international accounts but Route Sentry apparently performs just that. Unfortunately it's only available for windows. Does somebody know of an open source linux equivalent?
I looked at shorewall when I first needed the different routes and it looked like an overkill but when I have time I'll read through the reams of information and see if I can make it work. With my luck I'll find it only works with physical devices and not pppoe. Regards Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 05/11/09 09:23, Dave Plater wrote:
With my luck I'll find it only works with physical devices and not pppoe.
What makes you think that ? "network interfaces" are just a higher level of abstraction.. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 11/05/2009 05:29 PM, Cristian Rodríguez wrote:
On 05/11/09 09:23, Dave Plater wrote:
With my luck I'll find it only works with physical devices and not pppoe.
What makes you think that ? "network interfaces" are just a higher level of abstraction..
Not being that familiar with networking, I put my wireless card in my box and set it up. It hasn't connected to the router properly yet but I changed the routing table to route via wlan0 instead of dsl0 and the routing table now works. I can't connect to any local Internet sites within the routing table address ranges assigned to wlan0. I suspect if I assign dsl0 to wlan0 it will work. Regards Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (3)
-
Cristian Rodríguez
-
Dave Plater
-
Per Jessen