[SLE] cdrw ( again )
Hi, I have a problem with my IDE Acer 4x4x32 cdrw. I've applied all kernel options as mentioned in CD-Writing-HOWTO.gz, tried it on the SuSE 2.2.13, after that, desperately, also on the 2.2.14, I've tried the append="hdc=ide-scsi" line in lilo.conf, but still nothing; dmesg | grep ^scsi tells me scsi : o hosts and detected nothing, cdrecord -scanbus doesn't find anything either. Any hints? Sander ********************************************************************** Disclaimer This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of the Azlan Holdings bv and/or subsidiary. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200. ********************************************************************** -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
On Tue, 21 Mar 2000, Sander van Vugt wrote: When you do an lsmod, do the ide-scsi, sg and sr modules show up in the list of loaded modules?
Hi,
I have a problem with my IDE Acer 4x4x32 cdrw. I've applied all kernel options as mentioned in CD-Writing-HOWTO.gz, tried it on the SuSE 2.2.13, after that, desperately, also on the 2.2.14, I've tried the append="hdc=ide-scsi" line in lilo.conf, but still nothing; dmesg | grep ^scsi tells me scsi : o hosts and detected nothing, cdrecord -scanbus doesn't find anything either.
Any hints?
Sander
********************************************************************** Disclaimer
This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of the Azlan Holdings bv and/or subsidiary. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited.
If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200.
**********************************************************************
-- Ray Schwamberger Linux Technician Atipa Linux Solutions -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
When you do an lsmod, do the ide-scsi, sg and sr modules show up in the
No, lsmod only shows the drivers for my NIC list
of loaded modules?
Hi,
I have a problem with my IDE Acer 4x4x32 cdrw. I've applied all kernel options as mentioned in CD-Writing-HOWTO.gz, tried it on the SuSE 2.2.13, after that, desperately, also on the 2.2.14, I've tried the append="hdc=ide-scsi" line in lilo.conf, but still nothing; dmesg | grep ^scsi tells me scsi : o hosts and detected nothing, cdrecord -scanbus doesn't find anything either.
Any hints?
Sander
********************************************************************** Disclaimer
This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of the Azlan Holdings bv and/or subsidiary. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited.
If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200.
**********************************************************************
-- Ray Schwamberger Linux Technician Atipa Linux Solutions
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
********************************************************************** Disclaimer This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of the Azlan Holdings bv and/or subsidiary. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200. ********************************************************************** -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Sander van Vugt wrote:
Hi,
I have a problem with my IDE Acer 4x4x32 cdrw. I've applied all kernel options as mentioned in CD-Writing-HOWTO.gz, tried it on the SuSE 2.2.13, after that, desperately, also on the 2.2.14, I've tried the append="hdc=ide-scsi" line in lilo.conf, but still nothing; dmesg | grep ^scsi tells me scsi : o hosts and detected nothing, cdrecord -scanbus doesn't find anything either.
Did you disable the IDE CDROM support in the kernel? I believe that if you leave it enabled, it gets in the way of the SCSI emulation. Paul Abrahams -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hi Paul, I also tried it with IDE-CD disabled with the option "Include IDE/ATAPI CDROM support" set to no. The strange thing is that after booting it still finds a "hdc: 4x4x32, atapai cdrom drive". Don't understand where it comes from. Sander
Sander van Vugt wrote:
Hi,
I have a problem with my IDE Acer 4x4x32 cdrw. I've applied all kernel options as mentioned in CD-Writing-HOWTO.gz, tried it on the SuSE 2.2.13, after that, desperately, also on the 2.2.14, I've tried the append="hdc=ide-scsi" line in lilo.conf, but still nothing; dmesg | grep ^scsi tells me scsi : o hosts and detected nothing, cdrecord -scanbus doesn't find anything either.
Did you disable the IDE CDROM support in the kernel? I believe that if you leave it enabled, it gets in the way of the SCSI emulation.
Paul Abrahams
********************************************************************** Disclaimer This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of the Azlan Holdings bv and/or subsidiary. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200. ********************************************************************** -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
participants (3)
-
abrahams＠valinet.com -
rschwamberger＠atipa.com -
sander.van.vugt＠azlan.nl