RE: [SLE] IDE-TAPE Gurus instead of we...
I've got an IDE HP Colorado running on SuSE 6.3 with 2.2.14 kernel. The drive gets recognised alright - but I can't write anything to tape (because I don't have any!! ;-) But I've been assured that as soon as I get tapes everything will be fine. do a cat /var/log/boot.msg You should see the ide-tape device listed (in my case, it is hdc and I access it as /dev/ht0) So, I suggest you pack your bags out of "error city" and check "/var/log city" and see what those beautiful log babes have in store for you, man! <grin> The point I'm making - the device is supported, it should work - if it isn't working, then try not looking at the software and looking at the hardware Perhaps try different tapes. Kev
-----Original Message----- From: emf33@gci.net [mailto:emf33@gci.net] Sent: 15 May 2000 16:34 To: basiclinux@topica.com Cc: suse-linux-e@suse.com Subject: [SLE] IDE-TAPE Gurus instead of we...
IDE-TAPE Gurus instead of "We can afford SCSI man!" Because that is not in my budget right now during school!
Look Folks I have been around the net this weeekend and I am getting very frustrated on this one.....
I have Suse6.4 running on PII350 256M sdram,Awe64,IBM ATA/66@33 Toshiba CD,STD/Fd0-floppy1.44,DIAMOND-Viper/770,DIamond-MON/II3dfx Dlink530txt-nic.....SHe is running a dream on this machine with Suse babe on her-!
Folks someone please give me the down and get dirty on the drive I placed in bay three.>>>>>>>>>IDE-HP COLORADO 8GB drive set to master on 2nd ide controler hdc=/dev/ht0 or nht0
I use the command mt -f /dev/ht0 rewind..erase..reten..etc etc tec.... no frigging go.....errror city coming on this one.....
I get some tape movement and all but lots of errors in brulogs and messages logs
If I could find some good DOCS on the subject it would help to do this Like for instance do i need to make this a scsi-emu if so how? do I need this what>...Please give a starting point for me.....
Thanx for the respondents...... ;) Eric F
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
No solution, but another problem. I have the same tapedrive, but somehow SuSE (6.3) does NOT recognise it during boot. It's not in boot.msg at all, although if I put in a tape it starts winding, so I presume the thing is installed correctly. Any suggetions? jeroen
-----Original Message----- From: suse-linux-e-return-26426-jeroen=jota.nl@suse.com [mailto:suse-linux-e-return-26426-jeroen=jota.nl@suse.com]On Behalf Of Kevin Jackson Sent: Tuesday, May 16, 2000 9:18 AM To: suse-linux-e@suse.com Subject: RE: [SLE] IDE-TAPE Gurus instead of we...
I've got an IDE HP Colorado running on SuSE 6.3 with 2.2.14 kernel. The drive gets recognised alright - but I can't write anything to tape (because I don't have any!! ;-) But I've been assured that as soon as I get tapes everything will be fine.
do a cat /var/log/boot.msg
You should see the ide-tape device listed (in my case, it is hdc and I access it as /dev/ht0)
So, I suggest you pack your bags out of "error city" and check "/var/log city" and see what those beautiful log babes have in store for you, man! <grin>
The point I'm making - the device is supported, it should work - if it isn't working, then try not looking at the software and looking at the hardware Perhaps try different tapes.
Kev
-----Original Message----- From: emf33@gci.net [mailto:emf33@gci.net] Sent: 15 May 2000 16:34 To: basiclinux@topica.com Cc: suse-linux-e@suse.com Subject: [SLE] IDE-TAPE Gurus instead of we...
IDE-TAPE Gurus instead of "We can afford SCSI man!" Because that is not in my budget right now during school!
Look Folks I have been around the net this weeekend and I am getting very frustrated on this one.....
I have Suse6.4 running on PII350 256M sdram,Awe64,IBM ATA/66@33 Toshiba CD,STD/Fd0-floppy1.44,DIAMOND-Viper/770,DIamond-MON/II3dfx Dlink530txt-nic.....SHe is running a dream on this machine with Suse babe on her-!
Folks someone please give me the down and get dirty on the drive I placed in bay three.>>>>>>>>>IDE-HP COLORADO 8GB drive set to master on 2nd ide controler hdc=/dev/ht0 or nht0
I use the command mt -f /dev/ht0 rewind..erase..reten..etc etc tec.... no frigging go.....errror city coming on this one.....
I get some tape movement and all but lots of errors in brulogs and messages logs
If I could find some good DOCS on the subject it would help to do this Like for instance do i need to make this a scsi-emu if so how? do I need this what>...Please give a starting point for me.....
Thanx for the respondents...... ;) Eric F
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
participants (2)
-
jeroen＠jota.nl -
kevin.jackson＠jhallpr.demon.co.uk