On my computer I run opensuse 10.3 and kde 3.5.7. And got a problem whit my wireless lan card. The computer sees the card, but it can't connect to the router. The WLan doesn't see any possible connection. Probably I do something wrong, but I can't figure out what. So I made a clean install and so nothing is on my PC What should I install for my wlan card. Here is the link of my wlan http://www.sitecom.com/product.php?productname=Wireless+Network+PCI+Card+54g+Turbo&productcode=WL-171&productid=525&subgroupid=38 Here under you see what my terminal says about my wlan. linux-familie:/home/pater # hwinfo --wlan 20: PCI 203.0: 0282 WLAN controller [Created at pci.301] UDI: /org/freedesktop/Hal/devices/pci_1814_301 Unique ID: y9sn.m8+22TxppS7 Parent ID: 6NW+.c7JTK_YUBi2 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:03.0 SysFS BusID: 0000:02:03.0 Hardware Class: network Model: "SiteCom Europe BV RT2561/RT61 802.11g PCI" Vendor: pci 0x1814 "RaLink" Device: pci 0x0301 "RT2561/RT61 802.11g PCI" SubVendor: pci 0x182d "SiteCom Europe BV" SubDevice: pci 0x90ab Driver: "rt61pci" Driver Modules: "rt61pci" Device File: wlan0 Device Files: wlan0, wmaster0 Features: WLAN Memory Range: 0xfb010000-0xfb017fff (rw,non-prefetchable) IRQ: 18 (no events) HW Address: 00:0c:f6:34:c1:b8 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v00001814d00000301sv0000182Dsd000090ABbc02sc80i00" Driver Info #0: Driver Status: rt61pci is active Driver Activation Cmd: "modprobe rt61pci" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #8 (PCI bridge) I hope you all know some answers. Greets Dennis -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org