Hi people, Is anybody using DLT tapes with Suse 9.2? Are you having any problem? My kernel is 2.6.8-24.16, my DLT 7000, my scsi card qla1280 and aha1960 (with both scsi cards I got the same behavior). The problem is: I can do "tar -cvf /dev/nst0 ..." with small files (50Mb) without problems, for big files the "tar -c .." work fine only if I defined a bigger block. Then the problem is after writing (for example a file of 700MB): "mt -f /dev/nst0 eod" : results in /dev/nst0: input/output error "mt -f /dev/nst0 fsf 1": results in /dev/nst0: input/output error or if I'm at eod and I do a rewind I got the same result The syslog tells: ".....resetting scsi bus .... st0: Error 40000 (sugg. bt 0x0, driver bt 0x0, host bt 0x4)" Just to test, I installed mt-st.07-421, I define the /etc/stinit.def following Quantum Manual but I got the same errors. Anybody has any idea? Regards. Mariela