-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2016-12-23 22:26, Paul Neuwirth wrote:
Hello, got a problem with a machine here. First question: how to run btrfsck on boot? adding fsck.mode=force as kernel parameter seems only to only to check boot partition. The rebooted system fails again after some minutes (see log at end of post)
As far as I know, it is not possible. Use a rescue system.
[393168.772025] ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x1810000 action 0xe frozen [393168.772030] ata3.00: irq_stat 0x00400000, PHY RDY changed [393168.772032] ata3: SError: { PHYRdyChg LinkSeq TrStaTrns } [393168.772036] ata3.00: failed command: FLUSH CACHE EXT [393168.772041] ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 19 res 40/00:94:c0:26:9c/00:00:08:00:00/40 Emask 0x10 (ATA bus error)
I would check the hardware. Run the long SMART test on both hard disks.
Thanks a lot and happy christmas
Same. Just remember to trim the logs out of your responses, there is no need to send them again. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlhdnYgACgkQja8UbcUWM1weKwD/c4Nhd5lcS3qY+w+Sy18VfwMI oCtSZYY0uktPXJ0G8egA/0nfmlHEYAAPz+Q+toqRPuRR8JyQvC+Uo4MkIqwlHIPU =1kpT -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org