Fw: [SLE] adsl

----- Original Message ----- From: "Jan Joosten" To: "Peter Bradley" ; Sent: Thursday, August 28, 2003 8:11 PM Subject: Re: [SLE] adsl

...

On Wednesday 27 August 2003 18:57, Peter Bradley wrote:

...

Guys/Gals,

I'm trying to get an Alcatel speedtouch 330 DSL modem working on a new 8.2 installation. SuSE support say they can't help.

You might try the following sites: http://www.xs4all.nl/~pschram/english.html This helped me tremendously in getting the Speedtouch 33o working with a SUSE 8.1 box.

I followd the instructions on:

http://linux-usb.sourceforge.net/SpeedTouch/

for my SUSE 8.2 box and it works just fine for about 2 months now.

...

The post also says to make sure the kernel supports something called

HDLC,

...

and USB. How can I tell?

Most probably installed when you followed the standard SuSE installation

Jan Joostne

-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com

Finally managed to install the drivers following the instructions above, but I now get the following message when I try start-adsl:

I'm sorry, I didn't find your ADSL modem! Tips: check that you are running this program as root and your device is seen by your OS Linux users : check /proc/bus/usb/devices BSD users : check your ugen and usb entries in /dev using channel 2 Using interface ppp0 Connect: ppp0 <--> /dev/pts/2 sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] SIOCADDRT: No such device sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] LCP: timeout sending Config-Requests Connection terminated. Waiting for 1 child processes... script /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1, pid 1942 Terminating on signal 15. Waiting for 1 child processes... script /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1, pid 1942 Child process /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1 (pid

1942)

terminated with signal 15

I checked /proc/bus/usb/devices, and it says:

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.04 S: Manufacturer=Linux 2.4.20-4GB ehci-hcd S: Product=PCI device 1039:7002 (Silicon Integrated Systems [SiS]) S: SerialNumber=00:03.3 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

Since this means nothing to me, I tried (on advice) lsusb and lsmod, which give:

lsusb output

Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000

lsmod output

Module Size Used by Not tainted snd-pcm-oss 45888 0 (autoclean) snd-mixer-oss 13560 1 (autoclean) [snd-pcm-oss] videodev 5600 0 (autoclean) isa-pnp 29672 0 (unused) usbserial 18460 0 (autoclean) (unused) parport_pc 25800 1 (autoclean) lp 6240 0 (autoclean) parport 22440 1 (autoclean) [parport_pc lp] ipv6 134388 -1 (autoclean) snd-intel8x0 19204 1 snd-pcm 62912 0 [snd-pcm-oss snd-intel8x0] snd-timer 11904 0 [snd-pcm] snd-ac97-codec 31152 0 [snd-intel8x0] snd-mpu401-uart 3360 0 [snd-intel8x0] snd-rawmidi 13824 0 [snd-mpu401-uart] snd-seq-device 4000 0 [snd-rawmidi] snd 35940 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 3396 0 [snd] ipt_TOS 984 9 (autoclean) ipt_LOG 3288 1 (autoclean) ipt_state 568 10 (autoclean) st 27956 0 (autoclean) (unused) sr_mod 12600 0 (autoclean) sg 25852 0 (autoclean) mousedev 4148 0 (unused) joydev 5632 0 (unused) evdev 4032 0 (unused) input 3104 0 [mousedev joydev evdev] usb-ohci 18760 0 (unused) ehci-hcd 16012 0 (unused) usbcore 57836 1 [usbserial usb-ohci ehci-hcd] raw1394 14516 0 (unused) pppoatm 2408 0 (unused) ppp_generic 16476 0 (autoclean) [pppoatm] slhc 4624 0 (autoclean) [ppp_generic] ohci1394 16180 0 (unused) ieee1394 32880 0 [raw1394 ohci1394] af_packet 12392 1 (autoclean) sis900 12588 1 ipt_REJECT 2904 3 (autoclean) iptable_mangle 2072 1 (autoclean) iptable_filter 1644 1 (autoclean) ip_nat_ftp 2736 0 (unused) iptable_nat 15470 1 [ip_nat_ftp] ip_conntrack_ftp 3664 1 ip_conntrack 16380 3 [ipt_state ip_nat_ftp iptable_nat ip_conntrack_ftp] ip_tables 11040 9 [ipt_TOS ipt_LOG ipt_state ipt_REJECT iptable_mangle iptable_filter iptable_nat] ide-scsi 9296 0 ide-cd 29404 0 cdrom 28192 0 [sr_mod ide-cd] nls_iso8859-1 2812 1 (autoclean) ntfs 75244 1 (autoclean) reiserfs 200532 1

Anyone got any ideas what I might try next? Sorry to have to rely so completely on you all, but I just have no idea about these things and SuSE support say they can't help.

Cheers

Peter