hi i have a tekram dc390f i use suse 9.1 (kernel 2.6) with suse 8.0, 8.1, 8.2 and 9 i don't have this problem... the problem happen with kernel 2.6... i have a scsi hd on the 68-Pin Wide SCSI Internal port and a cdrom and burner scsi on my 50-Pin SCSI-2 Internal port i get often sym0: SCSI parity error detected: SCR1=132 DBC=2440a04 SBCL=0 linux kernel: eth0: no IPv6 routers present linux kernel: sym0: SCSI parity error detected: SCR1=132 DBC=2440a04 SBCL=0 linux kernel: sym0:0: ERROR (81:0) (a-0-0) (f/9d/0) @ (memd136a328:ffffffff). linux kernel: sym0: regdump: da 00 40 9d 47 0f 00 0e 00 0a 80 00 80 00 0f 0a 30 30 71 1f 02 ff ff ff. linux kernel: sym0: SCSI BUS reset detected. linux kernel: sym0: SCSI BUS has been reset. linux kernel: sym0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0 linux kernel: sym0:4:0: ABORT operation started. linux kernel: sym0:4:0: ABORT operation timed-out. linux kernel: sym0:6:0: ABORT operation started. linux kernel: sym0:6:0: ABORT operation timed-out. linux kernel: sym0:4:0: DEVICE RESET operation started. linux kernel: sym0:4:0: DEVICE RESET operation timed-out. linux kernel: sym0:6:0: DEVICE RESET operation started. linux kernel: sym0:6:0: DEVICE RESET operation timed-out. linux kernel: sym0:4:0: BUS RESET operation started. linux kernel: sym0: SCSI BUS reset detected. linux kernel: sym0: SCSI BUS has been reset. linux kernel: sym0:4:0: BUS RESET operation complete. the bus reset often any idea? thanks -- La boîte à prog http://www.laboiteaprog.com