On Saturday 20 November 2004 07:01, Peter B Van Campen wrote:
On Friday 19 November 2004 8:08 pm, Paul Cartwright wrote:
On Saturday 20 November 2004 7:53 pm, Marc Christensen wrote:
Strange there isnt a Yast module for lm_sensors...
I'll confirm that for 9.2, I did run the sensor-detect, clicked OK.. and ok.. and ok..
I have started lm_sensors successfully. When I run the 'sensors command I get w83697hf-isa-0290 Adapter: ISA adapter VCore: +1.59 V (min = +1.72 V, max = +1.89 V) +3.3V: +3.35 V (min = +3.14 V, max = +3.48 V) +5V: +5.09 V (min = +4.77 V, max = +5.25 V) +12V: +11.81 V (min = +10.84 V, max = +13.21 V) -12V: -12.50 V (min = -13.16 V, max = -10.77 V) -5V: -5.08 V (min = -5.23 V, max = -4.73 V) V5SB: +5.65 V (min = +4.77 V, max = +5.25 V) VBat: +1.48 V (min = +2.40 V, max = +3.60 V) fan1: 2657 RPM (min = 2657 RPM, div = 2) ALARM fan2: 0 RPM (min = 0 RPM, div = 2) temp1: +39°C (high = +127°C) sensor = thermistor temp2: +39.0°C (high = +80°C, hyst = +80°C) sensor = PII/Celeron diode alarms: Chassis intrusion detection ALARM beep_enable: Sound alarm disabled eeprom-i2c-2-51 Adapter: SiS96x SMBus adapter at 0x1400 Memory type: DDR SDRAM DIMM Memory size (MB): 256 eeprom-i2c-2-50 Adapter: SiS96x SMBus adapter at 0x1400 Memory type: DDR SDRAM DIMM Memory size (MB): 256 Note that my VCore, V5SB,VBat and fan1 seem to be out of range. Is this serious ? Regards Paul -- Paul Hewlett (Linux #359543) Email:`echo az.oc.evitcaten@ttelweh | rev` Tel: +27 21 852 8812 Cel : +27 72 719 2725 FAX: +27 866720563 --