Hi All, I have a 4TB external drive with USB/FW/eSATA interfaces available (it's basically a self-contained RAID5 with 5x1TB disks). It can be configured to show as a drive of pretty much any size up to 4TB. I would like to use this disk with SuSE and am interested to know what I need to do. I assume I need: - Recent SuSE (eg. 11.0) - 64 bit arch and have tried booting a MacBook pro (64 bit) using the SuSE 11 recovery disk, then attaching the disk. It works as expected for sizes up to 2.2TB (recognixed as SCSI, parted 1.8.8 shows correct size). But when configured as a disk over 2.2TB in size, the drive is reported as (ActualSize - 2.2)TB. I *assume* this is a MacBook hardware issue. Not sure. Looks like a 32bit rouding problem to me. What I would like to know is what the minimum software/hardware requirements would be to actually get a 4TB USB/FW/eSATA disk to work under SuSE11.0. Any help would be greatly appreciated. Even if you just say 'works for me' then tell me the hardware you use.... Thanks! -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org