On Tue, 18 Oct 2016 22:20:02 +0200 Knurpht - Gertjan Lettink <knurpht@opensuse.org> wrote:
Op dinsdag 18 oktober 2016 19:46:58 CEST schreef Dave Howorth <dave@howorth.org.uk> :
On Tue, 18 Oct 2016 00:28:10 +0100
Dave Howorth <dave@howorth.org.uk> wrote:
I'm just trying to use audio on a relatively new PC (so I can hear a utoob video) and just get silence. What's the best source for a walk through of the steps needed to configure audio on Leap 42.1? The only pages I've found are for earlier releases so I don't know whether they are valid.
YaST says I have:
Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller 8 Series/C220 Series Chipset High Definition Audio Controller
neither of which are configured.
Apologies for replying to myself, but nobody at all knows anything about configuring audio? I find that surprising!
Cheers, Dave
Output of lspci | grep -i audio You'll see something like this 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) then pick the last bit of the pci no ( 1b.0 here, replace by your findings ) and do lspci -vvv -s 1b.0| grep -i driver On my laptop it returns Kernel driver in use: snd_hda_intel If this returns a driver is in use, you should be able to configure the sound through yast.
Thanks for the reply. That command produces exactly the same output on my machine. So my question is HOW do I configure the sound through yast? (it isn't obvious to me) I was hoping there would be some instructions somewhere? Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org