Op Mon, 15 Aug 2022 05:12:53 +0900
Masaru Nomiya
Hello,
In the Message;
Subject : Re: TW: boot problem kernel 5.18.9-2 and higher Message-ID : <34b96a72-4345-f2b9-eeeb-5c6a111530a5@earthlink.net> Date & Time: Sun, 14 Aug 2022 07:18:28 -0400
[FM] == Felix Miata
has written: FM> Martin /Nightowl/ Byttebier composed on 2022-08-14 12:02 FM> (UTC+0200):
FM>>> nomodeset
FM>> With nomodeset the Plymouth boot screen works like before.
FM>> I wonder why I need to set this? Prior to kernel 15.18.9-2 there FM>> was no problem at all.
FM> That's the time of simpledrm having been re-enabled, a major FM> change in graphics handling during boot. [...]
Simpledrm has been re-enabled since 15.18.9-1, not 15.18.9-2.
In Martin's case, I believe that until 15.18.9-1, he was working with nouveau, and since 15.18.9-2, nouveau and nvidia's proprietary driver coexist.
As far as I know I always have used NVIDIA's driver. I bought the Dell last year in may. In the beginning with Leap 15.3 and NVIDIA (the easy way). Later on with TW and NVIDIA installed the hard way. AFAIR I couldn't install NVIDIA the easy way on TW. I can be there are some leftover from previous attemps to install NVIDIA the easy way.
In the Message;
Subject : Re: TW: boot problem kernel 5.18.9-2 and higher Message-ID : <20220813230324.e038b10bf7f6f29b010382f9@telenet.be> Date & Time: Sat, 13 Aug 2022 23:03:24 +0200
[M] == Martin /Nightowl/ Byttebier
has written: [...] M> cat /proc/cmdline M> BOOT_IMAGE=/boot/vmlinuz-5.19.0-1-default M> root=UUID=88da3879-fdf1-4cd5-a691-9346a9411953 pcie_aspm=off M> rd.driver.blacklist=nouveau mitigations=auto
I see that rd.driver.blacklist=nouveau is set by the installer of the NVIDIA driver. I can't figure this out.
I've added this myself following instruction from this website https://www.if-not-true-then-false.com/2022/opensuse-nvidia-guide/
If the kernel parameter nomodeset is not set, the installer of the NVIDIA driver should refuse to install the driver. But.... It has installed .... (_ _?
As said earlier before kernel 5.18.9-2 there was no need to set nomodeset.
In the Message;
Subject : Re: TW: boot problem kernel 5.18.9-2 and higher Message-ID : <34b96a72-4345-f2b9-eeeb-5c6a111530a5@earthlink.net> Date & Time: Sun, 14 Aug 2022 07:18:28 -0400
[FM] == Felix Miata
has written: [...] FM> Please boot without using nomodeset, and following Ctrl-Alt-F3 FM> and logging in on resulting vtty3, run the following:
FM> cat /var/log/Xorg.0.log | susepaste
FM> and report here [...]
Certainly, Xorg.0.log is an important source of information, but I want to know the following results;
1. cat /var/log/Xorg.0.log | grep nouveau
2. cat /var/log/Xorg.0.log | grep nvidia
3. cat /var/log/Xorg.0.log | grep nv
1) martin@dell-desk:~> cat /var/log/Xorg.0.log | grep nouveau [ 58.759] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-1-default root=UUID=88da3879-fdf1-4cd5-a691-9346a9411953 pcie_aspm=off nomodeset rd.driver.blacklist=nouveau nvidia-drm.modeset=1 mitigations=auto [ 59.183] (==) Matched nouveau as autoconfigured driver 1 [ 59.276] (II) LoadModule: "nouveau" [ 59.276] (WW) Warning, couldn't open module nouveau [ 59.276] (EE) Failed to load module "nouveau" (module does not exist, 0) 2) martin@dell-desk:~> cat /var/log/Xorg.0.log | grep nvidia [ 58.759] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-1-default root=UUID=88da3879-fdf1-4cd5-a691-9346a9411953 pcie_aspm=off nomodeset rd.driver.blacklist=nouveau nvidia-drm.modeset=1 mitigations=auto [ 59.183] (==) Matched nvidia as autoconfigured driver 0 [ 59.183] (II) LoadModule: "nvidia" [ 59.184] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so [ 59.276] (II) Module nvidia: vendor="NVIDIA Corporation" [ 60.036] (II) Loading sub module "glxserver_nvidia" [ 60.036] (II) LoadModule: "glxserver_nvidia" [ 60.036] (II) Loading /usr/lib64/xorg/modules/extensions/libglxserver_nvidia.so [ 60.635] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation" [ 61.894] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 61.895] (II) NVIDIA(0): "DFP-1:nvidia-auto-select" [ 61.960] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select" [ 62.072] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia 3) martin@dell-desk:~> cat /var/log/Xorg.0.log | grep nv [ 58.759] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-1-default root=UUID=88da3879-fdf1-4cd5-a691-9346a9411953 pcie_aspm=off nomodeset rd.driver.blacklist=nouveau nvidia-drm.modeset=1 mitigations=auto [ 59.183] (==) Matched nvidia as autoconfigured driver 0 [ 59.183] (==) Matched nv as autoconfigured driver 2 [ 59.183] (II) LoadModule: "nvidia" [ 59.184] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so [ 59.276] (II) Module nvidia: vendor="NVIDIA Corporation" [ 59.276] (II) LoadModule: "nv" [ 59.276] (WW) Warning, couldn't open module nv [ 59.276] (EE) Failed to load module "nv" (module does not exist, 0) [ 60.036] (II) Loading sub module "glxserver_nvidia" [ 60.036] (II) LoadModule: "glxserver_nvidia" [ 60.036] (II) Loading /usr/lib64/xorg/modules/extensions/libglxserver_nvidia.so [ 60.635] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation" [ 61.894] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 61.895] (II) NVIDIA(0): "DFP-1:nvidia-auto-select" [ 61.960] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select" [ 62.072] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia Regards, Martin -- Atari FTP-site: ftp://kurobox.serveftp.net:3021 Running openSUSE Tumbleweed / KDE 5.25.4