Sunny wrote:
On 4/11/06, Elijah Savage
wrote: Sunny wrote: I think it is surely recognized. Could this be because I got a asus 6600?
Section "Device" BoardName "Framebuffer Graphics" BusID "2:0:0" Driver "nvidia" Identifier "Device[0]" VendorName "VESA" EndSection
Strange, in my xorg.conf it shows the name of the card. Anyway, it's not importatnt.
Do you have in Xorg.0.log something like: (II) NVIDIA(0): NVIDIA GPU detected as: GeForce FX 6600
Also, when you start sax2, try to change the card to the correct model.
I get a little bit lost anyway - I can not recall what happens after you setup the card in runlevel 3 with sax -m 0=nvidia, did you try to issue startx? Does it starts the X server? If not, what errors you see in Xorg.0.log?
And, if it works, do it starts OK after reboot in runlevel 5? If not, what are the errors?
Sunny
-- -- Svetoslav Milenov (Sunny)
Not sure if this helps any. KDE is working fine but surely seems to render slower now. (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xD0000000 (--) NVIDIA(0): MMIO registers at 0xE4000000 (WW) NVIDIA(0): Failed to determine chip name (II) NVIDIA(0): NVIDIA GPU detected as: Unknown (--) NVIDIA(0): VideoBIOS: 05.43.02.72.00 (--) NVIDIA(0): Interlaced video modes are supported on this GPU (II) NVIDIA(0): Detected AGP rate: 8X (--) NVIDIA(0): VideoRAM: 262144 kBytes (II) NVIDIA(0): Connected display device(s): CRT-0 (--) NVIDIA(0): CRT-0: maximum pixel clock: 400 MHz (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (WW) NVIDIA(0): The user specified VertRefresh "43.000-75.000" has been (WW) NVIDIA(0): adjusted to "49.000-75.000" (the intersection with (WW) NVIDIA(0): EDID-specified VertRefresh "49.000-75.000" (II) NVIDIA(0): Monitor[0]: Using hsync range of 30.00-80.00 kHz (II) NVIDIA(0): Monitor[0]: Using vrefresh range of 49.00-75.00 Hz (II) NVIDIA(0): Clock range: 12.00 to 400.00 MHz -- ---------------------------------------------------------------------- Elijah Savage | AOL IM:layer3rules Senior Network Engineer | When it has to be switched or routed. http://www.digitalrage.org | The Information Technology News Center ----- http://www.digitalrage.org/?page_id=46 for pgp public key--------