Trying to get my Agfa ephoto CL18 digital camera to work for the first time: I'm running SuSE 8.1 personal with k_athlon 2.4.19-66. I purposely used the usb port my scanner is connected to, because I know it works. - Tried to set up the camera in Yast - 'unable to initialize camera' - Tried to setup in gtkam - 'no camera detected' - Did dmesg - I couldn't find the camera there - Did cat /proc/bus/usb/devices - Not there either - Did cat /proc/scsi/scsi - nope - Tried to manually mount /dev/sda1 to /mnt/camera - '/dev/sda1 not a valid block device' - Also tried other devices (sdb, sdc...) - same results I googled and did a SDB search and found that my camera is supported (as evidenced in Yast and gtkam available camera selections). Found nothing definitive in my googling, short of rebuilding the kernel. I also did a search on the list and found a thread in February called [SLE] Digital Camera (second try). Followed this thread and tried everything in it that applied with exactly the same results this person had. It was never solved. Please help! TIA Bernd -- "If you want to build a ship, don't drum up the men to gather wood, divide the work, and give orders. Instead, teach them to yearn for the vast and endless sea." Antoine de St. Exupery