I have a system, that when it boots, reports this in /var/log/messages: rst28 kernel: [ 61.244311] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 2 rst28 kernel: [ 61.244314] {1}[Hardware Error]: APEI generic hardware error status rst28 kernel: [ 61.244315] {1}[Hardware Error]: severity: 2, corrected rst28 kernel: [ 61.244317] {1}[Hardware Error]: section: 0, severity: 2, corrected rst28 kernel: [ 61.244318] {1}[Hardware Error]: flags: 0x01 rst28 kernel: [ 61.244319] {1}[Hardware Error]: primary rst28 kernel: [ 61.244320] {1}[Hardware Error]: fru_text: CorrectedErr rst28 kernel: [ 61.244322] {1}[Hardware Error]: section_type: PCIe error rst28 kernel: [ 61.244323] {1}[Hardware Error]: port_type: 0, PCIe end point rst28 kernel: [ 61.244324] {1}[Hardware Error]: version: 0.0 rst28 kernel: [ 61.244325] {1}[Hardware Error]: command: 0xffff, status: 0xffff rst28 kernel: [ 61.244326] {1}[Hardware Error]: device_id: 0000:00:02.3 rst28 kernel: [ 61.244327] {1}[Hardware Error]: slot: 0 rst28 kernel: [ 61.244328] {1}[Hardware Error]: secondary_bus: 0x00 rst28 kernel: [ 61.244330] {1}[Hardware Error]: vendor_id: 0xffff, device_id: 0xffff rst28 kernel: [ 61.244331] {1}[Hardware Error]: class_code: ffffff It reports it twice. Then no more. I am not sure what device is having the problem. I am not sure how to find out what 0000:00:02.3 is. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org